Series LF1170, LFL1170 Lead Free* Hot Water Temperature Control Valves are specifically designed for mixing hot and cold water on hot water supply systems. They can be used for a variety of applications to reduce the temperature of the hot water from the system, and are ideal for radiant heat applications. This series features a "double throttling" design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber. The LF1170 can be set to any temperature between 90°F and 160°F (60°F and 120°F for model LFL1170-M2) with flow rates as low as 0.5 gpm and as high as 23 gpm. The superior flow characteristics of this valve provide accurate temperature control to the requirements of ASSE 1017 across the rated flow range. These valves also provide additional safety as they restrict mixed water out to a drip upon loss of cold water supply to the valve. As an added feature, the LF1170, LFL1170 series incorporates integral check valves and filter washers in both the hot and cold water inlets to protect against cross flow. Available with threaded (-UT), solder (-US), PEX Quick-Connect (-QC) or CPVC connections. Maximum Pressure: 150psi (10 bar). Consisting of Lead Free* cast copper silicon alloy body construction.

Product Version: Revit MEP 2014

596 Downloads

Here are two Viewports:

1. Viewport Std. - with following Type Parameters:

a. Title – View Title.

b. Show Title – Yes.

c. Show Extension Line – Box checked.

2. Viewport W/ Box - with following Type Parameters:

a. Title – View Title- Detail Box.

b. Show Title – Yes.

c. Show Extension Line – Box not checked.

Place Detail Boxes: using place a drafting view as the example.

1. Load the View Title-Detail Box and Detail Box into a project.

2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.

3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.

4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types,    select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet,    then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.

5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using    it to change to 8, then do the same for the Y, now you have the Type 8 X 10.

 Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title.

No Rating

Product Version: Revit Architecture 2015

4446 Downloads

This is a face based family (Rafter Anchor). Use the vertical face to place it (i.e. the vertical side of the double top plates) and then just align (AL) with the rafter.

If you benefit from it please subscribe to my channel https://www.youtube.com/channel/UCJZt58oErg137aaKJpfygRw

Paypal donations: omul-andrei@protonmail.com

Bitcoin dontations: bc1q9qgjlt7x2yt6uvv869qjyd4nsuz8nhxkg3ck73

Etherium dontations: 0x2B5B713491c2D83889d546C31C115548c642d070

No Rating

Product Version: Unknown

304 Downloads

Product Version: Revit Architecture 2011

9700 Downloads

Download: http://metawell.bimobject.com/Metawell_KD-F_EN_1

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels.

Product Version: Unknown

3778 Downloads

An unnecessarily parametric curtain family. This was more of an exercise as opposed to something practical. 

The curtains can be parametrically opened and closed through a slider in plan view. In order to do this it took calculous, trigonometry, and numerical methods to pull off. It is a little computationally heavy on the model. 

Parameters include:

Materials, Curtain length/width/thickness, rod length/diameter, wall offset, grommet diameter/spacing, left/right/double curtains.

Product Version: Unknown

20258 Downloads

An unnecessarily parametric curtain family. This was more of an exercise as opposed to something practical. 

The curtains can be parametrically opened and closed through a slider in plan view. In order to do this it took calculous, trigonometry, and numerical methods to pull off. It is a little computationally heavy on the model. 

Parameters include:

Materials, Curtain length/width/thickness, rod length/diameter, wall offset, grommet diameter/spacing, left/right/double curtains.

Product Version: Unknown

8772 Downloads

Product Version: Revit Architecture 2011

5642 Downloads

Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb.

Parameters include options for 5 finishes and 15 glass options.

Manufactured by Holtkötter.

Product Version: Unknown

4867 Downloads

Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb.

Parameters include options for 5 finishes and 15 glass options.

Manufactured by Holtkötter.

Product Version: Revit Architecture 2011

4567 Downloads

Download: http://ersa.bimobject.com/ers_cha_twi 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Single and double seating units may be used as guest chairs in manager offices in addition to waiting areas. Single Twins chair with its structure consisting of 2 symmetrical components gently flexes according to the body weight of the user and provides comfort by form-fit.

Product Version: Unknown

5683 Downloads

Product Version: Revit Architecture 2011

10723 Downloads

Download: http://deko.bimobject.com/DEKO-DG-Door 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Single doors are available in module sizes from 700 x 2100 mm to 1200 x 2100 mm, double doors in size 1800 x 2100 mm. Non standard sizes are available to order.

4 or 6 mm clear toughened glass is used for the glazed sections of Deko DG glazed doors. Where specific fire or sound ratings are requried special glass can be inserted.

In the standard format DEKO Doors can be delivered with approval and certification and sound classifications up to 35 dB.

All doors are prefabricated, which eliminates any need for site finishing after installation. All DEKO Doors have been awarded the Danish Indoor Climate Labelling.

Product Version: Unknown

4590 Downloads

SERGIO Ansa Double Bowl Single Drainer

Overall Measurements: 1380x480mm

Bowl 1: 330x380x170mm

Bowl 2: 330x380x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

4340 Downloads

SERGIO Urbane Double Standard Bowl Only

Overall Measurements: 885x450mm

LH Bowl: 400x400x200mm

RH Bowl: 400x400x200mm

Material: 304 Grade Stainless Steel

Gauge: 1.2mm

Internal Bowl Radius: 25mm

Suppliedwith: 2 x Basket Waste and Overflow Kits, Timber Preparation Board, Stainless Steel Colander

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

908 Downloads