Hung from above supports, most often roof structure, this fully paramatric window louver keeps the harmful UV Rays off of your building. This is my first upload and one of my first parametric designs. Some of the parameters are type based and some of them are instance based. Please download to find out! Constructive Critique Comments are welcomed!

Product Version: Revit Architecture 2016

9566 Downloads

Wooden door ... Iraqi standards ... Building and Construction Engineering Department ... University of Technology ... Baghdad, Iraq ...

Product Version: Revit Architecture 2013

2521 Downloads

The door was modeled open so it can be used as an opening or decorative piece. Fully changeable materials and dimensions. Feel free to edit the family once downloaded. 

P.S. There were so many pieces to this family that some parameters might not be set up correctly so changing the height or width might cause problems.

Product Version: Revit Architecture 2015

12690 Downloads

Mission style dining table based on Stickley Mission Collection. 5 sizes based on none or up to (4) 15" leaf extensions.

No Rating

Product Version: Revit Architecture 2013

5625 Downloads

Parametric detailed model of ultra-thin 2016 LG Models 55 & 65BGP OLED TVs on black and clear plastic base.  Base grouped and can be deleted for wall hung use.

Product Version: Revit Structure 2016

22430 Downloads

Fully Parametric - Rabbet 1 & 2, Stop, Backbend 1 & 2, Backbend Fold, Face, Wall Stud, Sheathing 1 & 2.  Compatable with HM Framing Anchor for door details.

No Rating

Product Version: Revit Architecture 2008

2197 Downloads

Fully Parametric - Rabbet 1 & 2, Stop, Backbend 1 & 2, Backbend Fold, Face, Wall Stud, Sheathing 1 & 2.  Compatable with HM Framing Anchor for door details.

No Rating

Product Version: Revit Architecture 2008

1170 Downloads

Model of Pathfinder individual, omni-directional panel wall with storage for panels on both sides of opening. Panels are in the folded position. Changing the size of the opening will not change the number of panels. In this sense it's a generic model.

Product Version: Unknown

6152 Downloads

This is a perametric single door that can be adjusted to fit the detail level of your project. All components on door and be hiden or revealed through its perameters.

No Rating

Product Version: Unknown

645 Downloads

This family is parametric in that you can adjust the leaf height and width. The amount the doro is shown as open is determined by a formula that is based on a precentage of the overall leaf width.

I could not find a good one on line so I took a single pocket door I made and created this one from it.

No Rating

Product Version: Revit Architecture 2018

7825 Downloads

This family is parametric in that you can adjust the leaf height and width. The amount the doro is shown as open is determined by a formula that is based on a precentage of the overall leaf width.

I could not find a good one on line so I took a single pocket door I made and created this one from it.

No Rating

Product Version: Revit Architecture 2018

4011 Downloads

This door is loosely modeled to the Swingflex Hygiene doors commonly used in trafficable food prep areas, materials are set as intance parameters, so set these in the element properties.  Fully parametric. Created in Revit Arch 2010.

No Rating

Product Version: Revit Architecture 2010

3506 Downloads

LED Recessed fixture use for Living room, Kitchen, Bedroom ceiling...

♥Enjoy ♥ !

Product Version: Revit Architecture 2017

7731 Downloads

MIFAB Series MC-10D-EXT double, horizontal, adjustable high rough-in water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

50 Downloads

MIFAB® Series MC-12D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

24 Downloads

This modern and slim LG 55" (54.6" Diag.) Television with a thin brushed steel frame will add a great touch to any interior rendering. TV stand can be turned on or off so that it can be hung on the wall or sit on a nice entertainment center. Not Parametric, just the size that you would get if you bought it at Best Buy or Costco. Please rate and leave a comment and enjoy.

Product Version: Revit Architecture 2018

9007 Downloads

MIFAB® Series MC-15D double, vertical, fixed water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

42 Downloads

MIFAB® Series MC-10D-27-37-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

23 Downloads

MIFAB® Series MC-10D-27-37-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

17 Downloads

Line Based Euro-Style Upper/Lower Cabinet Casework that divides the length by the max_spacing automatically. Adjust max_spacing for number of cabinets.

Product Version: Revit Architecture 2011

17254 Downloads

Line Based Euro-Style Lower Cabinet Casework that divides the length by the max_spacing automatically. Adjust max_spacing for number of cabinets.

Product Version: Revit Architecture 2011

7999 Downloads

This is the header, king stud, and jack stud for a door or window family.

The top and bottom extents of the header are determined by levels like a column.

There are options to create double king studs and double jack studs if the header becomes large enough, but the formula for those visibility parameters can be removed and the visibility can instead be controlled on an instance basis.

It can be nested into a door/window family or used independently in a structural framing project.

Product Version: Revit Architecture 2018

808 Downloads

MIFAB® Series MC-13D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, left, right or both (specify) 4” (102) side inlets, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

20 Downloads

Site Component - Parametric Electrical Timber Pole

Product Version: Unknown

4269 Downloads

Extended End Plate Connection (4 Bolt), full configuable, plate size, plate thickness, bolt location, bolt size, etc. Required to be hosted to an element (ex. beam or column). 

Product Version: Revit Structure 2013

8138 Downloads

One Nested Door having 2 Frames & 2 Leaves Make more than 100 TypesMulty lite varies 1Vx1H to 10Vx4H &Lites can be Glass or solid, 2ndry Frame width can be zeroVent Ht can be zero for door without Vent.Flush door can be panel door by inputing Mould depthSingle Rebate Wooden door frame can be change to double RebateHollow Metal door frame is double rebate onlyMaterial of different parts of door can be differentOperable 2D swing represent corresponding Leaf type3D swing is also operable, Grill Y/N in Vent

Product Version: Revit Architecture 2013

17556 Downloads

Fully Parametric Door Family with Door Lock. Can open any Door Angle for 2D & 3D.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

8500 Downloads

Fully Parametric Door Family with Door Lock. Can open any Door Angle for 2D & 3D.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

4586 Downloads

The hollow metal frame will wrap around the wall and will automatically adjust to the wall width.  The door swing angle can be adjusted in the "instance".

Product Version: Revit Architecture 2011

15174 Downloads

This is a supper family with 12 different panels (leaf) and 9 different Frames (Jambs)... Both Panels can be changed. Major Leaf will adjust the Minor based on the total width of the door... Kick plates may be made visible as well as hardware (ironmongery)... More than 500 Combinations... 

Please rate if you like it. 

Feedback if it has problems. I just finished it and havent used it yet in an actual project. Its a bit heavy though...

Enjoy!

Product Version: Revit Architecture 2016

7160 Downloads