This casework family is a model of an American Woodmark base cabinet with two doors, two drawers, and an adjustable half-depth shelf.  Each door and drawer can be opened individually.  The shelf moves up and down and is held in place with clips.  The materials are pre-defined and assigned through casework sub-categories.  The family includes the URL to open the American Woodmark catalog wherein this cabinet, with its four standard widths, can be found.

No Rating

Product Version: Revit Architecture 2012

7195 Downloads

1 connected swing-out door with ONE rotating circular shelf

Image is from http://trendkitchencabinets.com/wp-content/uploads/2012/11/Menards-Kitchen-Cabinets-Unfinished-1.jpg 

Product Version: Revit Architecture 2013

20468 Downloads

This American Woodmark casework family is a narrow vertical tray storage unit.  It includes the tray divider and an adjustable shelf.  The door opens with an instance parameter.  The pre-defined materials are assigned with casework sub-categories.  American Woodmark offers this cabinet in a single width, 9", but does also offer a reduced 14" depth.  Both models are included as family types.  The URL opens the catalog wherein you can find this cabinet.

No Rating

Product Version: Revit Architecture 2012

5039 Downloads

AGRV_Door_GlassSlidingTriple_三落地窗門A

Metric Glass Triple Sliding door (TypeA) with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

757 Downloads

AGRV_Door_GlassSlidingQuadrupleA_四落地窗門A

Metric Glass Quadruple Sliding door (TypeA) with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

1527 Downloads

AGRV_Door_GlassSlidingTriple_三落地窗門

Metric Glass Triple Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

1190 Downloads

AGRV_Door_GlassSlidingTriple_三落地窗門

Metric Glass Triple Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

671 Downloads

AGRV_Door_GlassSlidingQuadruple_四落地窗門

Metric Glass Quadruple Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

571 Downloads

Office phone booth, measuring 41.5"W x 43.3"W x 88.8"H for use for acoustic quality and privacy in office settings.

Dimensions are not parameter controlled and are based on the ROOM brand phone booth. 

Parameters control materials (the light and dark color options are included as family types), visibility of door swing in plan, and visibility of a stool I included for reference.

This model is one I created for personal use, and is not created by the ROOM company.

More info here: 

https://room.com/pages/office-privacy-booths

Keywords: office phone booth privacy call conference acoustic telephone

No Rating

Product Version: Unknown

3642 Downloads

Metal frame doors - detailed frames with stops.  Standard 5 3/4" frame with adjustable frame depth.  Can adjust setback from wall face - default 1/8".  Rough openings will include frame width.  Has lockset in elevation & 3D views.  Door sizes 2'6", 2'8", 2'10", 3'0", & 4'0" x 7'0" - can add or adjust sizes.  Default frame width 2", frame head 4" - can adjust sizes.

No Rating

Product Version: Revit Architecture 2010

1495 Downloads

Download: http://swedoor-jeld-wen.bimobject.com/ext_char_pul 

To get the single door version and/or other doors/sizes click the link above.

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Character is our latest pride among the exterior doors. Its unique glass openings without strips and screws sets a new standard for design. Now you can create an entrance with a very stylish and self-expression. Door design, concealed hinges, solid construction and patented design solutions also contribute to the exclusive feel that Character conveys. 

Product Version: Unknown

1721 Downloads

MASS TEE Probe Cabinets store TEE probes safely and securely.  TEE probes hang freely and vertically to aid drying.

Our unique holder system helps prevent cross-contamination while protecting the transducer box.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Adjustable TEE Rack: stores 4 TEE probes

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

117 Downloads

MASS TEE Probe Cabinets store TEE probes safely and securely.  TEE probes hang freely and vertically to aid drying.

Our unique holder system helps prevent cross-contamination while protecting the transducer box.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Adjustable TEE Rack: stores 4 TEE probes

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

83 Downloads

MASS TEE Probe Cabinets store TEE probes safely and securely.  TEE probes hang freely and vertically to aid drying.

Our unique holder system helps prevent cross-contamination while protecting the transducer box.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Adjustable TEE Rack: stores 8 TEE probes

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

239 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 4 small scopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Removable Drip Tray

Small Scope Rack

Center Separator Scope Rack

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

177 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 8 small scopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Removable Drip Tray

Small Scope Rack

Center Separator Scope Rack

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

225 Downloads

A window with a fully parametric brick arch.  This took quite a while to figure out, but I wanted to share it with anyone that wanted it.  The brick arch is fully parametric in that it will adapt to the width, height, or arch height of the window.  The number of bricks will also adapt depending on how wide/tall the window is.  The window itself can be adapted as needed.  Note.  This arch part of the window is made to be configured by the height of the arch, not by a radius.  I did this since I wanted to be able to specify a specific height for the arch to match brick coursing.   And of course feel free to change the window to an opening/door/whatever.  Just make sure you keep the main parameters.

Product Version: Revit Architecture 2009

22294 Downloads

I was too hesitant to upload this family without properly checking that it flexes properly. I appologize for the confusion. This is a line based kitchen cupboard family as a generic model. The cupboards can be used in a very quick way to draft 3D cupboards inside your model and have them depict somehwat correctly in sections and plan views. There are two other very similar families which I uploaded. They are similar, but do NOT flex properly if you need to convert to imperial measurments. I am pretty sure this version will be ok. I altered some of the family parameters and constraints to better array and alter the width of the door panels, no matter what length the cupboard is. With the tweaking and fixing, this family can also be used as line based wardrobes. I included a wardrobe type within the family. I hope the owners of this site could implement a "replace" function for uploaders to better serve those downloading!

Product Version: Revit Architecture 2015

7531 Downloads

Lazy Susan with 1 connected swing out door and TWO rotating shelves

Image is from http://trendkitchencabinets.com/wp-content/uploads/2012/11/Menards-Kitchen-Cabinets-Unfinished-1.jpg 

Product Version: Revit Architecture 2013

16334 Downloads

Ianjunker inspired me to recreate his corner cabinet based on one I had in a previous residence which I liked. Essentially it is the same with the main difference being the door is attached to the shelving. By rebuilding it from scratch I learned a lot of the nuances of Revit trying to get all the parameters to work. Enjoy!

Thanks again to Ianjunker for this model: https://www.revitcity.com/downloads.php?action=view&object_id=14822

Product Version: Revit Architecture 2020

1448 Downloads

Contains 10, 20 & 40 Foot variations with High Cude variations as well.

This version has been fixed to ensure the Height takes into account the roof thickness. I've used a parametric workaround for that rather than re model the whole thing - since the original height setting was created by someone else

Param for door Visibility settings of components with additional Course View and plan view settings to help create clearer graphics. Metric Units. Rationalise Material naming & asset 

NOTE: Visibility of roof set to show in Coarse view so that it can been seen in site-plan type views set to turn off in other views to ensure internal volume can be seen.

Product Version: Revit Architecture 2014

14922 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero.  Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc.  etc.  Lallan Ji

Most params are shared Params

Product Version: Revit Architecture 2013

1248 Downloads

Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero.  Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc.  etc.  Lallan Ji

Most params are shared Params

Product Version: Revit Architecture 2013

2677 Downloads

Revit 2022

Door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

311 Downloads

A Christmas present for my Animal Research Facility and Laboratory Facility architect friends.

Metal Guardrail (4" standard height, but can be adjusted).  Three types:

1 1/2" projection

3" projection (most used in real life)

6" projection

Adjustable parameters include: Length, Height above floor, Bracket Spacing, Visibility of 'in' and 'out' brackets for dealing with inside and outside wall corners.  For very short walls choose very short bracket spacing (I recommend making yourself a simpler version).

Context image also shows the Broom Stow (previously uploaded).  Masonry wall stack bond pattern and a hollow metal door and frame with lite and louver help to make for a realistic image.

No Rating

Product Version: Revit Architecture 2017

842 Downloads

Ferrari F-40

Features 3 parametrical functions “Handle & Tires movement”, “Opening & Closing the Door”, “Shifting Gears”. Made by Revit(2010-2011).

Product Version: Revit Architecture 2011

23598 Downloads

The ROBOT Storage Cabinet is designed to efficiently store 4 robotic adapters, including HEPA air filtration.  Easy customizations are also available to maximize your storage needs.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Removable Drip Tray

Adjustable M1295 Scope Holders and Separator Racks: stores up to 4 scopes with robotic adapters

Center Separator Scope Rack

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/robot-storage-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

164 Downloads

Fully parametric louver with V-blades; adjustable width, thikness, blade number, blade thikness, distance between blades; automatically calculated hight; textured. Please, use this model in a door panel creation (generic model).

Product Version: Revit Architecture 2012

6473 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

1232 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

Product Version: Revit Architecture 2010

3629 Downloads