Stevens Industries (2) extra large music storage lockers with grille door - fully parametric

No Rating

Product Version: Revit Architecture 2011

2570 Downloads

Display cabinet 24"x24"x7' tall, with glass door and 3 drawers [updated version of the tall cabinet from Revit Library]

Product Version: Unknown

27518 Downloads

This is a fully parametric 16x7 garage door with panels.  The top row is glass with an option for the grids.  There is also an option for panels across the top row.

Product Version: Unknown

7017 Downloads

Standard Restroom Sign for a Men's Restroom door.

No Rating

Product Version: Revit Architecture 2008

15080 Downloads

Handle from a DSB door

No Rating

Product Version: Revit Architecture 2017

698 Downloads

Finally __  I am wrapping up construction on a storage shed... and thought some of y'all might find this 'project' file useful :)

 ♥ ♥ ♥  Hundreds of more free downloads at http://revitcomponents.com

Product Version: Revit Architecture 2010

8310 Downloads

Porsche Panamera - All materials are listed under PANAMERA for easy location in the materials listing.  As with all the others its set up to change the vehicles Colors of the vehicle, wheels, trim, and interior.

NOTE: AutoCAD file to large on this one to download

Comments Suggestions please.

UPDATE CONTAINS: Fixed door panel paint issue and some minor details adjusted.

Product Version: Revit Architecture 2012

14996 Downloads

One kitchen cabinet family to make this kitchen. Copy the family side by side and choose from: a sink, an electric hob, 2 or 3 drawers, a door, etc... Family is in Dutch language. Entourage (fridge, bin, lighting, wall, windows, etc.) not included! Picture shown is an EXEMPLE rendering i made with this family. Not a perfect family, but hopefully useble :-)

Product Version: Unknown

62733 Downloads

This is a fully parametric garage door with panels.  The top row is glass with an option to have the grids in the glass.  There is also an option for panels across the top row.  

Product Version: Unknown

8267 Downloads

This is the box model.  The box is modeled as parametric, and most of the types are already created.  You can see how these pieces stack together at http://stackedconfigurator.muuto.com/

I also modeled a front door on the boxes that you can turn on/off but it's not available to spec from MUUTO.

Please also download the model of the stand from my uploads if you'd like to use that as part of your configuration.

Product Version: Revit Architecture 2016

413 Downloads

Sidelights to accompany the Jeld-Wen 1381 Flat Top Entry Door

No Rating

Product Version: Revit Architecture 2015

900 Downloads

AGRV_Door_HiddenEscape_隱藏式逃生門

with parameters for open/close door in 3D view

Metric Hidden Escape door with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

477 Downloads

AGRV_Door_OverheadRolling_捲簾門

with parameters for open/close door in 3D view

Metric Overhead Rolling door with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

2041 Downloads

PORTÃO DE GARAGEM TIPO BASCULANTE COM MATERIAIS PARAMETRIZADOS

Product Version: Revit Architecture 2014

19602 Downloads

Roll Up Shutter with Counter.  Insert as a "Door".  It is completely Parametric - width, height, shutter closing distance and countertop width. The materials  Shutter & Shutter Box can alao be modified to suit your project.

No Rating

Product Version: Unknown

5311 Downloads

Floor-based generic model of an enclosed shower. Width, Depth, and Height are all adjustable Instance Parameters. Materials for shower door, glass, pan, lip, drain, and surround are all adjustable type paramteres. Flip controls are also included. Shower head and Valve control height are adjustable within the family. 

Modeled in Revit 2017, not 2016 as stated. 

Product Version: Revit Architecture 2016

107359 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Hardware Styles

Product Version: Unknown

3839 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Hardware Styles, Shelf Style

No Rating

Product Version: Unknown

4636 Downloads

Fully Parametric Office Container Family. Can open any Door Angle for 2D & 3D. Base Concrete can add and remove by one click. Container Roof Can be On/Off.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

11966 Downloads

Itt van fent az eredetije, az csak fix 1200. Kicsit feltuningoltam.

Pld nyitható a kabin ajtaja :-D

Adjustable size of the tray and opened the cabin door.

Product Version: Revit MEP 2010

11116 Downloads

Contains 10, 20 & 40 Foot variations with High Cude variations as well.

Originally Modelled by "SMARTBIM, LLC" according to the owner tag in the model, I have taken this and tweaked to my liking by:

Extra Param for door Vis.Visibility settings of components with additional Course View and plan view settings to help create clearer graphics. Metric Units. Rationalise Material naming & asset 

Product Version: Revit Architecture 2014

18624 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Drawer Styles, Hardware Styles, Shelf Style

No Rating

Product Version: Unknown

3031 Downloads

This is a highly parametric line based family. The family has minimum length restriction when drawing the line. Please provide feedback or comments. I plan to add more style types to it.

The family contains a level of detailing when cut in section. The following parametric values are available: Height, Width, Length, Material, Door Styles, Drawer Styles, Hardware Styles, Shelf Style

Product Version: Unknown

8375 Downloads

Insert as a DOOR!!

This is an expasion joint from wall to wall, mostly to be used with gypsum board walls.

The gap is 8". The plan represensation will show the joint gasket details. The elevation will show the trim and middle metal, as well as the 2 side expansion gadgets.

Both metal and expansion gadgets allow material selection.

This joint system is similar to InPro 233-A07 wall to wall expansion joint

Product Version: Revit Architecture 2015

1769 Downloads

This is a completely parametric dual-sliding, double 8-pane door with simple moving and sliding geometry! It also includes adjustable width muntins, three-way adjustable interior and exterior plinths, 4\" Tectonics interior trim profile, 6\" exterior trim profile, and instance parameters to control the left and right gap/opening dimensions. It also includes some simple plan-view symbolic lines.

Product Version: Unknown

11771 Downloads

With a glass-door cabinet you can show off as well as protect your glassware or your favourite collection.

Included Light and Dark timber finishes

No Rating

Product Version: Revit Architecture 2014

1734 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 18 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 18 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

547 Downloads

This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.

There are 2 tags. 1 for rooms, 1 for egress doors.

There are 4 schedules

1.      DOOR EGRESS SCHEDULE

2.      FACILITY OCCUPANCY SCHEDULE

3.      ROOM OCCUPANCY COMPARE SCHEDULE

4.      SPACE OCCUPANCY CLASSIFICATION

There is one sample Model.

Steps:

1.      Copy the schedules and tags to your current project.

2.      Open the Room occupancy compare schedule

3.      Select what type of area you see fit.

4.      Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants

5.      Manually type in tag value to match calculation to populate the room tag.

6.      Place the facility schedule on the code plan sheet.

7.      Place the Door egress schedule on the sheet too.

8.      Place all your room tags

9.      Place your egress door tags on 1 exit way door only per egress area

10.   Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)

11.   Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)

12.   The Facility Schedule will populate.

13.   Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.

You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com

Product Version: Unknown

4005 Downloads

Here are two Viewports:

1. Viewport Std. - with following Type Parameters:

a. Title – View Title.

b. Show Title – Yes.

c. Show Extension Line – Box checked.

2. Viewport W/ Box - with following Type Parameters:

a. Title – View Title- Detail Box.

b. Show Title – Yes.

c. Show Extension Line – Box not checked.

Place Detail Boxes: using place a drafting view as the example.

1. Load the View Title-Detail Box and Detail Box into a project.

2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.

3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.

4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types,    select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet,    then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.

5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using    it to change to 8, then do the same for the Y, now you have the Type 8 X 10.

 Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title.

No Rating

Product Version: Revit Architecture 2015

4447 Downloads

No Rating

Product Version: Revit Architecture 2012

9661 Downloads