| |
You can control blades depth, slope and count, louver frame width and foot height, and the usual swing, trim width and projection, width and height. and the material. Metric. |
|
Product Version: Revit Architecture 2008
5633 Downloads
|
|
 |
A floor based pedestal with push button |
No Rating |
Product Version: Revit Architecture 2012
4073 Downloads
|
|
|
 |
This family is parametric so you can set the width, height, panel opening angle and louvered blade angles.
It is restricted to 4 panels, 2left and 2 right, and if you open the panels wider than 90degrees it gets confused, so if anyone can fix this for me I will be grateful.
My first upload to RevitCity! |
|
Product Version: Revit Architecture 2016
7055 Downloads
|
|
|
 |
This is a stylistic modification of something I downloaded a few months ago. We're starting to give our clients "virtual tours" of what their spaces can look like, and there is a lot of demand for kitchen cabinets to look similar to those that they have chosen from magazines. So these are the farmhouse style. |
|
Product Version: Unknown
19816 Downloads
|
|
|
 |
This is a end cabinet for placing on the end of a row of cabinets sitting on a 45 degree angle reference line providing a straight edge on an angle. Feel free to comment and leave feedback! |
|
Product Version: Revit Architecture 2008
2943 Downloads
|
|
|
 |
Parametric horizontally opening freight elevator with window. You can also change the position and size of the window. |
|
Product Version: Unknown
8683 Downloads
|
|
|
 |
Lockset & Latch, Gloss Brass Handle Place component in floor plan with an offet of 3'3" |
|
Product Version: Revit Architecture 2013
4213 Downloads
|
|
|
 |
Gloss Brass Handle, Lockset & Latch. Place component in floor plan with an offet of 3'3" |
No Rating |
Product Version: Revit Architecture 2013
2427 Downloads
|
|
|
 |
Simple carriage style hardware for garage doors. It is loaded as a project because they are two separate families. Edit family and load into your project individually.
Face based. Parametric materials. |
|
Product Version: Revit Architecture 2014
1377 Downloads
|
|
|
 |
Parametric Tudor Arch done in Revit 2022 |
|
Product Version: Unknown
1812 Downloads
|
|
|
 |
Parametric Roman Arch done in Revit 2022 |
|
Product Version: Unknown
1961 Downloads
|
|
|
 |
Parametric Gothic Arch done in Revit 2022 |
|
Product Version: Unknown
1651 Downloads
|
|
|
 |
Parametric Cathedral Arch done in Revit 2022 |
No Rating |
Product Version: Unknown
1090 Downloads
|
|
|
 |
Parametric Oval Arch done in Revit 2022 |
No Rating |
Product Version: Unknown
691 Downloads
|
|
|
 |
Parametric Segmented Arch done in Revit 2022 |
|
Product Version: Unknown
1355 Downloads
|
|
|
 |
glass - double acting |
No Rating |
Product Version: Unknown
6343 Downloads
|
|
|
 |
glass - double acting |
No Rating |
Product Version: Unknown
14493 Downloads
|
|
|
 |
Shows the following: - Mark (auto)
- Width (auto in inches)
- Occupancy count (manual)
- Required Width (auto in inches)
You must link in Shared Parameters into project and create parameters for used wall types (similar to example.) |
|
Product Version: Revit Architecture 2009
2214 Downloads
|
|
|
 |
درب پارکینگ
مبین فراهانی
telegram channel : @revitmasters
instagram : @mobinfarahaniii |
|
Product Version: Revit Architecture 2020
609 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
148 Downloads
|
|
|
 |
Simple adjustable Bilco basement bulkhead |
No Rating |
Product Version: Revit Architecture 2020
2259 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
80 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
69 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
83 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
69 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
77 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
129 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
|
Product Version: Revit Architecture 2012
1836 Downloads
|
|
|
 |
Download: http://bimobject.com/en/swedoor-jeld-wen/product/int_door_hp_40_sliding_int_double
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
This is a high performance (HP) interior sliding double door range, built for professional demands. A wood-based door construction combined in a pocket frame. These doors are only offered unclassified. |
|
Product Version: Revit Architecture 2015
1085 Downloads
|
|
|
 |
Almost fully parametric. Height, width, frame size, handle height. Frame, door panels - materials.
Please leave comments and suggestions. |
No Rating |
Product Version: Revit Architecture 2012
6351 Downloads
|
|
|
Search