parametric, opening dimensions scale, but bar count is locked.

No Rating

Product Version: Unknown

3631 Downloads

One Door, multiple options.

Strip quantity can be increased progressively in the properties.

No Architrave.                

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

No Rating

Product Version: Revit Structure 2020

53 Downloads

Product Version: Revit Architecture 2009

1894 Downloads

This is my first upload so please be gentel.  This is a simple family that allows you to place a shower partition with a curb on 4 sides and glass for the partition, in a room.  You can change a lot,

• Curb Heights - independent on all 4 sides


• Curb depth


• Overall Height


• Overall Width (you should be able to use align and lock to make it stretch.


• 2 - Panel or 3- Panel glass partition


• Each partition door has a 2D 45 degree rep for plan view.


• Each partition configuration allows you to put in two override dimensions that I will try to explain.


• Override Panel Width - If you need one of the panels to be say "6" use this to do that.  When this is set to 0 it should return to equal equal.


• Override Door Width - If you need the door to be a certain width say 30" enter it here.

This model is not foolproof, although I did do a few basics to keep people out of trouble, like a minimum door height and glass thickness.  But if you try to specify a panel override width and a door override width on the 2 panel with the curbs locked to the wall it will probably break.  However if you do that on the 3 panel, the 3rd panel will take up the slack.

Please leave your comments for me.  Thanks.

Product Version: Revit Architecture 2013

18461 Downloads

NOHS, glass, farmhouse, craftsmen, rustic 

No Rating

Product Version: Unknown

3267 Downloads

Parametric Height/Width

Face Based

Product Version: Unknown

4246 Downloads

This door has the capability of having 2 to an infinite amount or door panels. There is a parameter allowing for you to change the distance of the door to the exterior side of the wall.

Hope it helps,

smh

Product Version: Revit Architecture 2014

2052 Downloads

Fixed wall offset problem.

Product Version: Unknown

8193 Downloads

ALWAYS WANTED ONE OF THESE 

NOW WE HAVE ONE;FULLY PARAMETRIC

Product Version: Revit Architecture 2014

9089 Downloads

All finishes are changeable.

Done using Revit 2014

Product Version: Unknown

10364 Downloads

Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Garden-Aire Sliding Patio Door 2-Wide models

Product Version: Revit Architecture 2009

9532 Downloads

This window family has type parameters to drive shim space, frame, mullion, & sash width & depth, glazing unit thickness and materials. Also, wall sheathing location can be set by instance for different wall assemblies, the flange setback will control how far in front of the sheathing the window will project. Lites & transom can be toggled on or off. Also, this family features nested families for picture, casement, awning, gliding, & single hung operation with proper representation in elevation for window, lites, and transoms. This should accommodate a wide variety of window configurations in a single family. 

Product Version: Revit Architecture 2015

9198 Downloads

This folding sliding door's height and width is adjustable. Can go up to 12m wide, more panels are put in as the door is widened.

No Rating

Product Version: Revit Architecture 2009

1703 Downloads

This is a single storefront door with a check box in the instance properties switching the door from 90 deg. to 45 deg.

Product Version: Revit Architecture 2012

6987 Downloads

No Rating

Product Version: Revit Architecture 2009

1102 Downloads

No Rating

Product Version: Revit Architecture 2009

930 Downloads

Parametric for Width And Height. Nested Panel and Symbolic Swing

Product Version: Revit Building 9.1

5596 Downloads

A simply modeled but very thoroughly parametricized toilet compartment. Through manipulating heights of the structural elements can be made floor or ceiling mounted. Had a little trouble with the door swing (goes all the way around when the door swings inward) so I included a toggle to turn it off - you'll have to add your own 2D line if you need it. If someone wants to fix it, I'd be grateful!

Product Version: Unknown

3271 Downloads

Product Version: Revit Architecture 2017

3490 Downloads

Door hung flush to the wall with concealed frame.  The latest in door design from Italy.  See it and others at www.rest-agio.com.

Add your own finishes.

Product Version: Revit Architecture 2013

2173 Downloads

AGRV_Door_FoldingDouble_雙摺疊門

with parameters for open/close door in 3D view

Metric Single Double Folding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Unknown

2077 Downloads

Product Version: Revit Architecture 2009

7788 Downloads

Parametric 2 Panel Slide Door with  a Flexble Opening Distance Door Panel and a fixed Panel

No Rating

Product Version: Revit Structure 2020

1119 Downloads

Parametric 2 Panel Slide Door with  a Flexble Opening Distance Door Panel and a fixed Panel

No Rating

Product Version: Revit Structure 2020

483 Downloads

Parametric 2 Panel Slide Door with  a Flexble Opening Distance Door Panel and a fixed Panel

No Rating

Product Version: Revit Structure 2020

423 Downloads

Revit 2021 Fully Parametric

No Rating

Product Version: Unknown

1171 Downloads

Corrected Parametric Problem

No Rating

Product Version: Unknown

1920 Downloads

• high level of detail


• fully parametric

Product Version: Revit Architecture 2013

11537 Downloads

Parametric Height/Width

Face Based

Product Version: Unknown

2760 Downloads

No Rating

Product Version: Revit Architecture 2017

964 Downloads