This is a supper family with 12 different panels (leaf) and 9 different Frames (Jambs)... Both Panels can be changed. Major Leaf will adjust the Minor based on the total width of the door... Kick plates may be made visible as well as hardware (ironmongery)... More than 500 Combinations... 

Please rate if you like it. 

Feedback if it has problems. I just finished it and havent used it yet in an actual project. Its a bit heavy though...

Enjoy!

Product Version: Revit Architecture 2016

7094 Downloads

I have added another Half Door for a Half Wall.  Please use this as many times as you choose!  Will also show as a standard swing on your project.

Product Version: Unknown

3112 Downloads

Double Egress Corridor Fire Door

Product Version: Revit Building 9.1

11334 Downloads

This is a fully Parametric Double Door family I have been working on it for awhile. It has the ability to be solid, half-glass, and full glass. You can control all of this by checking the on/off boxes in the type properties. It has the option for no tim, trim on one side or both sides. Make sure that glass width and height have a value even if you are using the solid flush option otherwise family will not work.

Product Version: Revit Architecture 2011

9186 Downloads

Door is EBE Porte P2FM available in the US at www.rest-agio.com. Visit the site for full line catalog as well as other luxury finishes from Italy.

Fully Parametric.

Product Version: Revit Architecture 2013

11894 Downloads

A single flush door with handle. The handle can be switch off as desired.

No Rating

Product Version: Unknown

1909 Downloads

Wall projection around Door and Window

No Rating

Product Version: Revit Architecture 2008

584 Downloads

Door is EBE Porte PC1 available in the US at www.rest-agio.com. Visit the site for full line catalog as well as other luxury finishes from Italy.

Product Version: Revit Architecture 2013

7335 Downloads

Porta de correr com uma folha fixa e duas folha de correr. Tem parâmetro (por instância) de abertura da folha, para visualização dela aberta ou fechada.

Instance parameter for door opening.

Made in Revit 2022.

No Rating

Product Version: Revit Architecture 2020

179 Downloads

UOT - Kamel - Door - fixed panal with Grill... Building and Construction Engineering Department ... University of Technology ... Baghdad, Iraq ...

No Rating

Product Version: Revit Architecture 2013

892 Downloads

THIS IS TO BE THE 1322 JELD-WEN DOUBLE DOOR WITH 2 12" SIDELIGHTS.  I TRIED TO MAKE IT USER FRIENDLY. BUT SINCE I AM STILL LEARNING, I CAN NOT SAY IF IT IS OR NOT.

Product Version: Revit Building 9

4703 Downloads

parametric steel grill door.:-)

Product Version: Revit Architecture 2009

19503 Downloads

Substation Door as per DEWA requirements.

Product Version: Revit Architecture 2018

1132 Downloads

Spanish Garage Door

Product Version: Revit Building 9

17978 Downloads

Barn door with glass paneling

No Rating

Product Version: Unknown

2724 Downloads

3 Panel Sliding Door

Product Version: Unknown

11845 Downloads

Generic and parametric double sliding door with four panels (two fixed panels and two sliding panels)

Parameters for galzing width, frame width and depth, frame material and glazing material.

2D representation ready but not detailed.

Product Version: Revit Architecture 2015

41848 Downloads

Single hollow metal framed exterior door with half lite. Parameters for frame depth and 2" vs 4" head

Product Version: Revit Architecture 2008

11129 Downloads

Another component of the Farmhouse style Kitchen cabinets. Here's the upper single door cabinet.

Product Version: Unknown

28463 Downloads

Porta de correr com uma folha fixa e três folhas de correr. Tem parâmetro (por instância) de abertura da folha, para visualização dela aberta ou fechada.

Instance parameter for door opening.

Made in Revit 2022.

No Rating

Product Version: Revit Architecture 2020

191 Downloads

Flush double sliding shower door with changeable material properties. One size only, sorry.

No Rating

Product Version: Revit Architecture 2015

8234 Downloads

This American Woodmark casework family is a model of their one door, one drawer, one roll out tray divider base cabinet.  They offer two widths, 12" and 15", and those are included as family types.  The 12" has a tray divider with two compartments (one divider) while the 15" sports a three compartment divider (two dividers).  All movable components operate with instance parameters.  The trays are not adjustable beyond pulling them out.  There are actually two trays that get swapped in and out with your selection of cabinet width.

I've upgraded this cabinet.  It's a Revit 2013 model now and I've fixed a problem with the door.  The upgraded cabinet is a separate download.

No Rating

Product Version: Revit Architecture 2012

6040 Downloads

Base Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

7385 Downloads

Base Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

12694 Downloads

Tall Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

9529 Downloads

Tall Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

15486 Downloads

open pivot door, curtain wall panel shown open with closed panel turned off in visibility - can be reversed to show closed

No Rating

Product Version: Revit Architecture 2009

7263 Downloads

Porta de correr com uma folha fixa e uma folha de correr. Tem parâmetro (por instância) de abertura da folha, para visualização dela aberta ou fechada.

Instance parameter for door opening.

Made in Revit 2022.

No Rating

Product Version: Revit Architecture 2020

121 Downloads

The number and size of windows, height, width and thickness of the door are all controlled by parameters.  In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel.

No Rating

Product Version: Unknown

1932 Downloads

The number and size of windows, height, width and thickness of the door are all controlled by parameters.  In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel.

No Rating

Product Version: Revit Architecture 2013

1539 Downloads