 |
This is based on the BYU diving boards (so professional) but it's parametric. You can change the length and width, and which side you want the roller on.(or both sides) The distance to the fulcrum is an instace parameter for fun. It is face based so you can put it anywhere.
Don't try to make the diving board skinnier than 1'5". It won't work. Anything bigger than that is fine. |
No Rating |
Product Version: Revit Architecture 2016
3521 Downloads
|
|
 |
Regulation size and spaced concrete cornhole boards. Area of play next to boards has been marked. |
No Rating |
Product Version: Revit Architecture 2017
2105 Downloads
|
|
|
 |
Someone needed a diving board...Hope this helps. Materials for the board,base,brackets and bolts can be changed. |
|
Product Version: Revit Architecture 2011
6552 Downloads
|
|
|
 |
Based on the "Diving board Residential" object I make a simple modification to the length and thickness proportions of that board to create something simppler and more elegant.
Hope you enjoy, and if you make your own versions please share them with everyone. |
|
Product Version: Revit Architecture 2012
9680 Downloads
|
|
|
 |
SR Smith Diving Platform |
|
Product Version: Revit Architecture 2011
1543 Downloads
|
|
|
 |
Linear wood fence.
The posts will space at around 5ft. There are 3 rails. The boards will space at around 6".
There is a parameter for material.
It cannot go up in an angle. |
|
Product Version: Revit Structure 2017
7781 Downloads
|
|
|
 |
3-meter diving board with a blue sandpaper finish on the board. Enjoy this for the active Revit rendering. |
No Rating |
Product Version: Unknown
3434 Downloads
|
|
|
 |
This is a 16ga three bay sink with 2 12" drain boards. It was created using the dimensions and information from Regency Tables and Sinks model #600S31014212 specification sheet. I think it is pretty close to the actual, but there may be a few discrepancies.
Please rate. |
No Rating |
Product Version: Revit Architecture 2011
5620 Downloads
|
|
|
 |
8 lane pool olympic sized with 20 foot deep diving well can chance pool bottom type lane type edge type and water type, enjoy |
|
Product Version: Revit Architecture 2009
30131 Downloads
|
|
|
 |
|
No Rating |
Product Version: Unknown
1690 Downloads
|
|
|
 |
|
No Rating |
Product Version: Unknown
1540 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2011
706 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2011
4003 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2011
612 Downloads
|
|
|
| |
190 & 175 Basebords or Plynthboards |
No Rating |
Product Version: Unknown
562 Downloads
|
|
|
 |
Fully Parametric exterior window trim: 1x4, 1x6 and 1x8 types. Just place on exterior wall and use align tool to fit around window. |
|
Product Version: Revit Architecture 2018
2255 Downloads
|
|
|
 |
Parametric Arched Shutter - Boarded (wallbased) Controls:
- Window width x height x drop
- # of boards, board spacing
- Cross boards spacing, middle cross-board
|
|
Product Version: Revit Architecture 2015
1668 Downloads
|
|
|
 |
Parametric Board Extension Over Pool
Paramentric Board Width
Parametric Materials
Railings Move with Board Width
Static 1M Height
Static Base Location
Static Stair Location |
|
Product Version: Unknown
7539 Downloads
|
|
|
 |
Can be adjusted for height, rough opening dimensions, and frame depth. Section in between header boards can be adjusted to various materials such as insulation, sheathing, etc. |
No Rating |
Product Version: Revit Architecture 2015
771 Downloads
|
|
|
 |
A differential circuit reaker, for electric boards
Disjoncteur différentiel, adaptable aux tableaux éléctriques
Position : On / Off |
|
Product Version: Revit Architecture 2017
571 Downloads
|
|
|
 |
This is an adjustible wall based family that is based off of the Polyvision Smart Boards. |
|
Product Version: Revit Architecture 2008
18187 Downloads
|
|
|
 |
Boat with Wake boards - All materials are listed under SBOAT for easy location and changing of colors and materials.
Comments Suggestions Ratings Please |
|
Product Version: Revit Architecture 2012
18781 Downloads
|
|
|
 |
3}18"x18"x18" w/ 2 drain boards Not finish, but you guys & girls can clean it up |
|
Product Version: Revit Architecture 2008
6520 Downloads
|
|
|
 |
Exterior door trim boards: 1x4, 1x6 and 1x8 types. Just place on exterior wall and use align tool to size around exterior garage doors and extrances. |
No Rating |
Product Version: Revit Architecture 2018
1563 Downloads
|
|
|
 |
Boat and Trailer - All materials are listed under BandT for easy location and changing of materials
UPDATE CONTENT: Parametric Settings: Ski bar and Boards on/off, Trailer on/off
FILE TYPE: Revit 2012 64 bit |
|
Product Version: Revit Architecture 2012
18937 Downloads
|
|
|
 |
Parametric scalloped wooden fence with parmetric max/min height and length. Non-parametric, but editable, are 4"x4" wood posts, 1"x6" boards, and 2"x4" horizontal supports. Note some exact lengths throw an error - if so, just choose a slightly different length. |
No Rating |
Product Version: Revit Architecture 2020
1331 Downloads
|
|
|
 |
Farm Fence with paramaters:Fence Height,Fence Length,Board Spacing, Number of Boards, Number of Posts, Post Bury Depth, Top Board Offset
Revit 2016 |
|
Product Version: Unknown
12021 Downloads
|
|
|
 |
This is a parametric generic model family based on Victor Pallet Racking, select half, quarter or third shelving in type graphic parameters. Shelving boards optional. Materials are to be set as type parameters. Model elements not visable in plan view or coarse view settings, indicated in plan by dashed grey lines. keywords: racking, pallet, shelving, victor, storage, industrial, commercial, bulk storage, adjustable. |
|
Product Version: Revit Architecture 2010
17430 Downloads
|
|
|
Search