R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families

 +

R E V I T COMPONENTS BLOG, keep updated!

Product Version: Revit Architecture 2008

7217 Downloads

R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families

 +

R E V I T COMPONENTS BLOG, keep updated!

Product Version: Unknown

5749 Downloads

Kranplatt 500 is a distinct variant of our other platforms. This time however we designed it solely for outdoors installation. Not every building has been adjusted for installing platforms inside. For this distinct case we provide you with this fully covered model of our platform.

K 500 available size:

300 - 999

1000 - 1499

1500 - 1999

2000 - 2499

2500 - 2999

3000 - 3499

3500 - 3999

4000 - 4499

No Rating

Product Version: Revit Architecture 2020

157 Downloads

OVER-ALL

Art. S.1910W 9 MODULES LED 3000K  Max. 700mA 1755lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1569lmRated input power: 20.2WLuminaire efficacy: 78lm/WRequires remote ON-OFF power supply or Dimmable power supply CE - ENEC 03LUMINAIRE TYPESurface mounted up-light fitting . IP rating IP 65 IP67MATERIAL CHARACTERISTICSDie cast EN AB-47100 aluminium (low copper content) housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Mechanical resistance IK 08 Maximum load capacity --LIGHTING PERFORMANCEClear polycarbonate lenses. Toughened glass 5mm Micro Over-all, 6mm Mini Over-all, 8mm Over-all. Lamp  fixed position. LOR -- LOW SURFACE TEMPERATURESurface temperature of glass -- (Ta 25°C)INSTALLATION AND MAINTENANCEA4 stainless steel fixing clips. Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire). Allowing direct fixation to the solid ground.WIRINGSupply 5m cable section type H07RNF sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS III . Available colours: Aluminium grey (cod.14). Weight: 2.13 Kg Glow Wire test: --LED circuit included.OVER-ALL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

490 Downloads

City Art Gym

A piece of arwork that doubles as an outdoor gym!

By City Art Gym

www.cityartgym.com



City Art Gym

Malmo, Sweden

+46 (0) 704-716975 catarina@cityartgym.se

This email address is being protected from spambots. You need JavaScript enabled to view it.

City Art Gym®is a beautiful combination of public art and exercise equipment. The entire body can be trained on the three elegant sculptures, regardless of your age and fitness level. The unique sculpture trio”The Ball, The Bridge and the Barr” can be placed in a park, at a square, on a boardwalk, on the beach, on the schoolyard, the grounds of a residential development or a corporation. With its elegance it can be placed in public spaces where a regular outdoor gym is not appropriate or where there is not enough space.

Product Version: Revit Architecture 2012

16993 Downloads

A solar heater is a device that uses heat from the sun to heat a substance, in this case water. Its most common use is to heat water for use in pools and health services (showers, laundry or dishes etc.) Both in domestic environments such as hotels. 

Are simple and sturdy, they can have a lifespan of up to 20 years without major maintenance. 

In many climates, a solar water heater can reduce energy consumption used to heat water. This decrease can be up to 80% in gas consumption. We recommend cleaning the collector every 4 to 6 months to increase their efficiency and lifespan. 

The efficiency of capturing solar energy is very high solar heaters.

Un calentador solar es un aparato que utiliza el calor del sol para calentar alguna sustancia, en este caso agua. Su uso más común es para calentar agua para uso en albercas y servicios sanitarios (duchas, lavado de ropa o trastes etc.) tanto en ambientes domésticos como hoteles.Son sencillos y resistentes, pueden tener una vida útil de hasta 20 años sin mayor mantenimiento.

En muchos climas un calentador solar puede disminuir el consumo energético utilizado para calentar agua. Tal disminución puede llegar a ser de hasta 80% en consumo de gas. Se recomienda limpiar el colector cada 4 o 6 meses para aumentar su eficiencia y vida útil.

La eficiencia para captar la energía solar es muy elevada en los calentadores solares.

Product Version: Revit Architecture 2013

20544 Downloads

BLITZ 4 WINDOWS

Art. S.4089W 1 MODULES COB 3000K  220-240Vac 1867lm 17.4W CRI 90 MacAdam step 3Rated luminaire luminous flux: 303lmRated input power: 18.1WLuminaire efficacy: 17lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCELuminaires come with toughened glass lenses already installed using the appropriate "lens-carrier slide". These may be substituted with coloured dichroic lenses. INSTALLATION AND MAINTENANCEA robust, die-cast aluminium cap is secured to the base with four stainless steel screws. WIRINGDouble cable entries with PG13,5 (Ø 7÷12 mm) cable glands. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.9 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1045 Downloads

POOL SPOT

Art. S.3693 12 MODULES LED RGBW (W=6000K)  24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp  fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1066 Downloads

BLINKER

Art. S.6080W 1 MODULES COB 3000K  220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

248 Downloads

MINIREEF BOLLARD

Art. S.5240W 1 MODULES COB 3000K  220-240Vac 1740lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1090lmRated input power: 16.8WLuminaire efficacy: 65lm/WPower supply Dimmable  DALI 2 / PUSH CELUMINAIRE TYPEBollard fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCE99.98% pure anodized aluminium reflector. Polycarbonate lens  transparent  with controlled downward light emission for avoiding any glare, UV-stabilised and vandalproof . Lamp  fixed position . INSTALLATION AND MAINTENANCEGarden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. WIRINGDouble cable entries with grommets. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), BURNISHED BRONZE (cod.20). Weight: 6.13 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

472 Downloads

CATCH SQUARE 4LED

Art. S.7406W 4 MODULES LED 3000K  220-240Vac 620lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 415lmRated input power: 7.8WLuminaire efficacy: 53lm/WElectronic ballast  DALI 2 / PUSH CELUMINAIRE TYPEFalse ceiling-recessed down-light fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Aluminium front trim or Marine grade stainless steel AISI 316L front trim. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08LIGHTING PERFORMANCEThe led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Toughened  transparent  glass 5mm thick. Lamp  adjustable ±20° position. LOR -- INSTALLATION AND MANTEINANCEThe luminaires are fixed to the falseceiling by a heavy-duty bracket system, adjustable. WIRINGLuminaire hard wired with 0.4m H05RNF cable, supplied with IP67 connector . Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 1.84 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2019

199 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

2308 Downloads

AVENUE STREET LIGHTING 36led

Art. S.3090N36 MODULES LED 4000K  220-240Vac 12614lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 9976lmRated input power: 107WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 66MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLE CONNECTIONPole mounted in painted aluminium with Ø 102 mm connection. ON REQUEST ADAPTOR for cylindrical poles Ø 76 mm.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H05RN-F cable. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 18.96 Kg Glow Wire test: -- Exposed windage area : 0,06 m² ( 1000mm ), 0,05 m² ( 800mm ), 0,04 m² ( 645mm )LED circuit included.AVENUE PATENT PENDINGThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

798 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

697 Downloads