NOHS, modern, glass, window, wooden

Product Version: Unknown

16147 Downloads

1950-1967 Volswagen Type 2 (T1) Van - This is a special request so i hope its what you needed. Set up to change the color of the Roof, Bumpers, Window trim, and two tone body colors. You can also change the interior floors, and two tone interior, as well as the window colors: Rear, sides, doors and windshield, including two tone wheels and even the logo on the front.  All materials are listed under VW T1 for easy location and changing of materials.

NOTE: AutoCAD file to large to download, sorry

FILE TYPE: Revit 2012 64 Bit

Product Version: Revit Architecture 2012

28393 Downloads

A revit 7 version of the popular octagonal shaped window

Product Version: Unknown

989 Downloads

This window has the capability to have 0 to 10 mullions in the horizontal and vertical directions. Each mullion can be placed at random distances from the bottom or left side. VD# or HD# is to specify the Vertical or Horizontal distance of the numbered mullion. To Change the mullion count change the number under the constraint section of Edit Type.

The family is a little slow when making changes but seems to work fine once loaded.

Hope this helps,

smh

Product Version: Revit Architecture 2014

3975 Downloads

A parametric window. You can change the dimensions of the module and say how many modules do you need.

Product Version: Unknown

700 Downloads

Insert this as you would any window, goes over top of other windows fine. Enjoy.

Product Version: Revit Architecture 2010

15157 Downloads

Portuguese Window.

100 % Paramétric

Enjoy

Product Version: Revit Architecture 2009

5027 Downloads

Portuguese Window.

100 % Paramétric

Enjoy

Product Version: Revit Architecture 2009

5080 Downloads

Portuguese Window.

100 % Paramétric

Enjoy

Product Version: Revit Architecture 2009

7454 Downloads

This door has a fully adjustble swing from 0-180 degrees and an adjustbal window

No Rating

Product Version: Revit Architecture 2015

721 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero.  Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc.  etc.  Lallan Ji

Most params are shared Params

Product Version: Revit Architecture 2013

1248 Downloads

Portuguese Window.

100 % Paramétric

Enjoy

Product Version: Revit Architecture 2009

3225 Downloads

Portuguese Window.

100 % Paramétric

Enjoy

No Rating

Product Version: Revit Architecture 2009

1730 Downloads

This door has a fully adjustble swing from 0-180 degrees with a flully adjustable window

Product Version: Revit Architecture 2015

952 Downloads

The window frame is fixed on a projecting rcc sill and lintel outside the opening to allow 100% openable sliding shutters.

No Rating

Product Version: Revit Architecture 2011

918 Downloads

To make it parametric. Please clcik the link.

Please support my Youtube Channel, if this family is helpful. >>>https://www.youtube.com/watch?v=kho5o7nAMaY&list=PLFtpZGWL7M_I3mMBN7lTFsat-CQF8Uh8X&index=4

No Rating

Product Version: Unknown

752 Downloads

Generic window to appear as functional as Curtainwall.

Based on Kawneen 451T

Storefront with Receiver

Adjust depth of wall placement similar to curtainwall with numeric imput. Works in brick, stucco, etc (Varying wall thickness)

Can change spandrel panel thickness and glazing type color with material palette. Use check bock to change panel from vision to spandrel in plan for thickness, but must use material to change actual material

Built in shim distance can be adjust to control rough opening shown on elevations and plan. 

Receiver distance value is meant to be mullion plus additional receiver thickness, not total receiver thickess.

No Rating

Product Version: Revit Architecture 2012

1581 Downloads

Nested door having 1 wooden door cum window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family.  Lallan Ji

No Rating

No Rating

Product Version: Revit Architecture 2018

548 Downloads

Generic window to appear as functional as Curtainwall.

Based on Kawneen 451T

Storefront with Receiver

Adjust depth of wall placement similar to curtainwall with numeric imput. Works in brick, stucco, etc (Varying wall thickness)

Can change spandrel panel thickness and glazing type color with material palette. Use check bock to change panel from vision to spandrel in plan for thickness, but must use material to change actual material

built in shim distance can be adjust to control rough opening shown on elevations and plan. 

receiver distance value is meant to be mullion plus additional receiver thickness, not total receiver thickess.

No Rating

Product Version: Unknown

1569 Downloads

Flush - no trim - vision window

Product Version: Revit Building 5.1

1537 Downloads

Generic Window Shutter. Adjustable height and width.

Product Version: Revit Building 9.1

13134 Downloads

This is a window family with a parametric mesh inside

Product Version: Revit Architecture 2018

10107 Downloads

Made from a window family for a 3d model detail on the tuscan or italianate home.

No Rating

Product Version: Revit Building 9

1094 Downloads

4 shutter window with aluminium frame and its offset from the wall centerline can be changed.if you liked this visit my blog for more or give your requirements i ll design it for you....my bloghttp://www.arniteshpatel.blogspot.com/

Product Version: Revit Architecture 2011

4070 Downloads

Aluminum and tempered glass window showing handles. All dimensions and materials parametrized. Metric.

Product Version: Revit Architecture 2008

44056 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

739 Downloads

This is a window family that is a opening. Sorry no parameters. WARNING: This file is very large and my cause system performance problems.

No Rating

Product Version: Revit Architecture 2010

3992 Downloads

mmd window 100/100

No Rating

Product Version: Unknown

613 Downloads

For Casement window, not parametric

No Rating

Product Version: Unknown

304 Downloads

Guichet window

No Rating

Product Version: Revit Architecture 2008

889 Downloads