 |
The number and size of windows, height, width and thickness of the door are all controlled by parameters. In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel. |
No Rating |
Product Version: Unknown
1942 Downloads
|
|
 |
The number and size of windows, height, width and thickness of the door are all controlled by parameters. In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel. |
No Rating |
Product Version: Revit Architecture 2013
1546 Downloads
|
|
|
 |
This louver is fully parametric; adjust length, angle and thickness of louver. The family automatically calculates the number of blades needed to fill the opening. |
|
Product Version: Revit Architecture 2008
33723 Downloads
|
|
|
 |
Família originária da criada por Winderson Soares Matos |
|
Product Version: Unknown
1704 Downloads
|
|
|
 |
This family is parametric so you can set the width, height, panel opening angle and louvered blade angles.
It is restricted to 4 panels, 2left and 2 right, and if you open the panels wider than 90degrees it gets confused, so if anyone can fix this for me I will be grateful.
My first upload to RevitCity! |
|
Product Version: Revit Architecture 2016
7096 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.
4. window shutters are multy lite shutters & number of lites can be set.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
|
Product Version: Revit Architecture 2018
475 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.
4. window shutters are multy lite shutters & number of lites can be set.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
239 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.
4. window shutters are multy lite shutters & number of lites can be set.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
226 Downloads
|
|
|
| |
Rutherford Joinery SA - Heritage Range - Casement - HB3F |
No Rating |
Product Version: Revit Architecture 2009
682 Downloads
|
|
|
 |
This door window fimily is dedicated to our PM Shri Narendra DD Modi
Nested door having 1 wooden door/window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero if you do'nt need it. etc. etc. By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family. Lallan Ji |
No Rating |
Product Version: Revit Architecture 2015
1115 Downloads
|
|
|
 |
Fully Parametric for overall width and height. All facets of the blind can also be adjusted from transom width and depth to the blades width and thickness. Can be displayed as open, partially open or closed. |
|
Product Version: Revit Architecture 2011
14984 Downloads
|
|
|
 |
I added a simple parametric frame to the louver created by JFazz1 |
|
Product Version: Revit Architecture 2014
5612 Downloads
|
|
|
 |
I didn't see this family on RevitCity so I'll put mine on.
A simple Double Door with windows. You can change the size and position of the windows, the size of the doors, and the materials of everything.
REVIT 2016 |
No Rating |
Product Version: Revit Architecture 2016
12891 Downloads
|
|
|
 |
Zip file with raked and cathedral windows.
Mutiple versions of Raed and Cathedral windows with differing mullion numbers.
Parametric frame size, and reveal depth
Windows can be modified by length, angle and low height (straight edge) |
No Rating |
Product Version: Unknown
872 Downloads
|
|
|
 |
A component done with the Adaptive Railing Family File with 5 axis structure. To be add preferably on the 3D window. And arrange in a floor window.
Pick the spot of the axis by it's sequence. Or add the sequence of new points in the family file.
Diameter of the railing - 50 mm; circular form |
|
Product Version: Revit Architecture 2012
5264 Downloads
|
|
|
 |
my first upload ever, hope you find it useful,, edited to project specification..tailored for 2d-3d parameters
parametric height, and width and sill height, option to open
two mid panels, position always set to zero before altering
desire parmaeter,, all material chage be change upon your
liking.. thank you admiin |
No Rating |
Product Version: Revit Architecture 2015
3559 Downloads
|
|
|
 |
Fully parametric arched door with diamond window pattern. For parameters other than Width, Height and Thickness scroll down. I moved them for ease of changing the critical parameters. Adjustable Swing is an instance parameter. There is also a visibility toggle to turn off the line to making it look like a Dutch door.
Fore arched door go here
Hope it helps,
smh |
|
Product Version: Revit Architecture 2014
1777 Downloads
|
|
|
 |
Fully parametric arched door with diamond window pattern. For parameters other than Width, Height and Thickness scroll down. I moved them for ease of changing the critical parameters. Adjustable Swing is an instance parameter. There is also a visibility toggle to turn off the line to making it look like a Dutch door.
Fore non arched door go here
Hope it helps,
smh |
No Rating |
Product Version: Revit Architecture 2014
3806 Downloads
|
|
|
 |
Janela com 2 folhas de correr e uma bandeira fixa, feita especialmente para Kapa Arquitetos Associados - Goiânia - Goiás - Brasil |
|
Product Version: Revit Architecture 2014
3937 Downloads
|
|
|
 |
This is the header, king stud, and jack stud for a door or window family.
The top and bottom extents of the header are determined by levels like a column.
There are options to create double king studs and double jack studs if the header becomes large enough, but the formula for those visibility parameters can be removed and the visibility can instead be controlled on an instance basis.
It can be nested into a door/window family or used independently in a structural framing project. |
|
Product Version: Revit Architecture 2018
810 Downloads
|
|
|
 |
I had been paintful with the sash trim on doors and windows. now i made it done without any mistake so far (except i lazy to fix an extension of the trim inside the frame). you won't see it at all. go ahead to change the formula of its height will make it work. enjoy!
FYI: since i'm working on Revit 2013 now so i think the version of the file is 2013 too. yes, it is and sorry about that. :( |
|
Product Version: Revit Architecture 2012
31669 Downloads
|
|
|
 |
Height and width can be changed.
Height is changed with the "Vertical extension height" paramater, not the "height" perameter, that does nothing. |
No Rating |
Product Version: Unknown
345 Downloads
|
|
|
 |
Marvin Window Case with Superman Symbol - 2 types:
- 2' 7'' x 3' 7 5/8''
- 2' 9'' x 3' 7 5/8''
|
No Rating |
Product Version: Revit Architecture 2019
95 Downloads
|
|
|
 |
I created this windows for an exsisting old building.
This windows has a simple metallic grate and a sealed glazing, placed right before the splay.
Each side of the windows has a parametric splay you can set to "0.00" if you don't need it.
Easily editable. it's not adapt for slim walls. suggested on 30-40cm minimum
Parameters included:
Sill height
height
width
superior/inferior/left/right splay
sill depth |
|
Product Version: Revit Architecture 2016
2497 Downloads
|
|
|
| |
Window that comes out from the facade plane |
|
Product Version: Revit Architecture 2010
819 Downloads
|
|
|
 |
sliding window |
|
Product Version: Unknown
10337 Downloads
|
|
|
 |
To make it parametric. Please click the link.
Please support my Youtube Channel, if the family is helpful.>>>>https://www.youtube.com/watch?v=rTMxFs6_s3g |
No Rating |
Product Version: Unknown
532 Downloads
|
|
|
 |
This is curtain panel object based on Easi-Serve's SS Series of windows. Parameters included for low profile header and integral stainless shelft.
Ideal for drive-thrus, pay stations, inspection booths, etc.
http://www.easi-serv.com/ss-series |
|
Product Version: Revit Architecture 2013
13661 Downloads
|
|
|
| |
Roof window |
No Rating |
Product Version: Revit Architecture 2010
1702 Downloads
|
|
|
 |
This can be modified to use different window family. |
No Rating |
Product Version: Unknown
559 Downloads
|
|
|
Search