NOHS, stained glass window, contemporary window, red and black window

Product Version: Unknown

8189 Downloads

NOHS, stained glass window, contemporary window, red and black window

Product Version: Unknown

4209 Downloads

originally uploaded by tmohr, it is now entirely adjustable (to the best of my knowledge from how much I have tested the column)

Product Version: Unknown

12024 Downloads

This window family is fully parametric. You can adjust the angle of the opening, panel/frame/mullion material, the size of the mullion and frame and the thickness of the panel.

Product Version: Revit Architecture 2008

43029 Downloads

This window was used in a wall with brick veneer and is not adjustable.  There is an area of window left out to allow for a dbl door to be inserted.  This will allow for the window and door to be tagged seperately.

Product Version: Revit Architecture 2011

17490 Downloads

This default window set up with different type of brick sill where you can choose which one and you can make a double hung or sliding window infill with glass. also you can close gap the brick sill using stud wall to 1mm. It will save you time set up the brick sill. Make sure save as before you change the type of window. This is default only window.

Product Version: Unknown

34359 Downloads

Revitfamily.biz

This is a very parametric craftsman style base cabinet.  You can change the typical length, width, height, and material, plus put on end panels and if you crack the family open, there are even more easter eggs.  Check it out.

If you would like more crazy parametric cabinets in different styles check out this video

Product Version: Revit Architecture 2017

7856 Downloads

An adjustable louvre window where you specify the maximum span for the louvre and the window will create the required number of bays. You can also specify the usual, size of louvres, angles, free air, material etc etc...

Product Version: Unknown

42762 Downloads

A window with a fully parametric brick arch.  This took quite a while to figure out, but I wanted to share it with anyone that wanted it.  The brick arch is fully parametric in that it will adapt to the width, height, or arch height of the window.  The number of bricks will also adapt depending on how wide/tall the window is.  The window itself can be adapted as needed.  Note.  This arch part of the window is made to be configured by the height of the arch, not by a radius.  I did this since I wanted to be able to specify a specific height for the arch to match brick coursing.   And of course feel free to change the window to an opening/door/whatever.  Just make sure you keep the main parameters.

Product Version: Revit Architecture 2009

22333 Downloads

This is a circle top window with a brick sill , a single row of soldier course around entire window and a KEYSTONE head peice.

Product Version: Unknown

36435 Downloads

Modern/Contemporary style window with adjustable muntin/mullion placement. Window can be set next to similar windows to make different arrangements.

All windows shown in thumbnail are the same family.

Product Version: Revit Architecture 2018

19052 Downloads

This is a picture window with an awning window above. The trim width is fully parmetric for the interior and exterior. There are only a few family types (sizes) created so feel free to add to it.

Product Version: Unknown

7446 Downloads

window bars for window of size 1500 by 900 mm

Product Version: Unknown

16416 Downloads

I was given the task to get the legend components to read text or type mark and have the Legend and the floor plan both reading same tag text!What it does is let me label the window say W1 in the window family for the WINDOW TYPE. Add a window tag it reads W1 in the tag. Finally when I insert that window into the window legend I have a text defaulty in that family to read the type so it says under the window W1 and any time I read number my window tags they all will update in a blink of an eye!Used for any Legend Component like Door, Window, Wall types!I've read in these forums that people are not using the Legend for WALL TYPES or Window Elevations, Door Elevations. I know you still can't Dim. walls in the legend but you can link a text into any item to report that item TYPE in the legend, to schedule, in the plans and change it once!Use Model text in the family to link to a shared parameter, then in the tag's label link that text to the shared parameter and you have yourself a link text and label tag!Copy Paste the Model Text into any window family you might have now by using model text in that window family, use a shared parameter to link that text to and link a window tag family text label to that shared parameter BAM BAM! You got it!

Product Version: Revit Architecture 2008

4912 Downloads

this is a 40mm casement window modeled off the Vantage profile, all elements are extruded profiles right down to the neoprene seals, this file is quite large but excellent for showing that extra detail in your project.  I think i've managed to iron out all the kinks, and yes this window is parametric.

Product Version: Revit Architecture 2010

63504 Downloads

Parametric horizontally opening freight elevator with window. You can also change the position and size of the window.

Product Version: Unknown

8699 Downloads

THIS IS NOT MY COLUMN. I uploaded it and removed its constraints for those who don't know how to do that so that the column is actually ten feet and editable now.

Rendered in medium (looks much better in high) 

Set the column hight to 6' 10" to make it right from the start  

Product Version: Revit Architecture 2011

10902 Downloads

this is a fixed 40mm window modeled off the Vantage profile, all elements are fully extruded right down to the neoprene seals.  This file is quite large but excellent for adding that extra detail to your peoject.  I think i've managed to iron out all the kinks.  This window is parametric.

Product Version: Revit Architecture 2009

32870 Downloads

An adjustable corner window where you can specify the angle of the corner as well as the usual adjustable parameters. Be sure to set the instance parameter for wall thickness after placing the window...

Product Version: Unknown

25511 Downloads

Fully Parametric exterior window trim: 1x4, 1x6 and 1x8 types. Just place on exterior wall and use align tool to fit around window.

Product Version: Revit Architecture 2018

2260 Downloads

this is a 40mm casement window modeled off the Vantage profile, all elements are extruded profiles right down to the neoprene seals, this file is quite large but excellent for showing that extra detail in your project.  I think i've managed to iron out all the kinks, and yes this window is parametric.

Product Version: Revit Architecture 2009

23121 Downloads

Basic window to display a fixed window with bottom sliding component.

Product Version: Revit Architecture 2013

12072 Downloads

This is 4 panels window that I modify from Revit window Tpl All Bars.

Product Version: Revit Architecture 2009

20825 Downloads

Whimsy the Window is a nice window for your contemporary traditional home.

Whimsy does not conform to the societal evil of "Parameters". Whimsy refuses to be parametrical because how would you feel if people got to just freely change your dimensions? How insulting! Whimsy feels strongly that society is in need of vast reform, and refuses to conform to your profiling of your window needs. Whimsy truly encapsulates contemporary and traditional values. If you don't, then that's your problem.

Product Version: Unknown

6066 Downloads

 This is closely modeled after the Broyhill Vantana dining set.  It's a grouping of 4 individual families, so hopefully you can break it apart as needed.  Parameters are available for finishes, but not sizing.

Product Version: Unknown

22270 Downloads

A commercial precast window sill that FINALLY cuts the wall correctly, unlike typical wall sweeps, and that can be used in both window families and projects

Product Version: Revit Architecture 2015

12212 Downloads

Aluminum exterior window with fixed panels. One panel is operable awning type.  window panel sizes are parametric.

Product Version: Revit Architecture 2009

39831 Downloads

32/16 BASEMENT WINDOW WITH WINDOW WELL AND DRAIN PIPE

Product Version: Unknown

9172 Downloads

Dont you hate it when you have angled windows that can be a pain to sort..well no more!

ive created a fully parametric window that has separate parameters for the angles of the interior and exterior of the window reveals.

All you need to do is add a sweep for the exterior sill and it should look great and be done quickly.

No Rating

Product Version: Unknown

73 Downloads

An 7' and 8' high partially parametric Garage Door, with trim

Product Version: Revit Architecture 2008

17674 Downloads