Custom Wood Vanity Cabinet Built for Kohler Archer Series Sink. This version is custom made for a corner location.

No Rating

Product Version: Revit Architecture 2015

616 Downloads

This window family is fully parametric.

Product Version: Revit Architecture 2008

19706 Downloads

Another component of the Farmhouse style Kitchen cabinets. This is the upper corner cabinet.

Product Version: Unknown

20478 Downloads

Corner bath/spa in hob optional inset or offset from wall with size parameters. Part of my library, full library and template available with all rendering materials set up etc contact karinise@hotmail.com

No Rating

Product Version: Unknown

29063 Downloads

Angle top window based on the revit fixed window.  The height adjustment is measured across the window instead of on a side, sorry it isn't the easiest to work with.

Product Version: Revit Architecture 2009

19559 Downloads

Angle top window based on the revit fixed window.  The height adjustment is measured across the window instead of on a side, sorry it isn't the easiest to work with.

Product Version: Revit Architecture 2009

15112 Downloads

NOHS craftman style single window made by Scott

Window Casement, Wood Windows. Openings, Special Window. 

Product Version: Unknown

25090 Downloads

Fully parametric column with Drop Panel with Corner Cut

No Rating

Product Version: Unknown

1205 Downloads

This is an L-shaped counter top with a sink in the corner. great to use in a small kitchen

Product Version: Revit Architecture 2008

22574 Downloads

A parametric shower to place in a corner
The shower has rounded walls

No Rating

Product Version: Unknown

4528 Downloads

This is a tranaction window with a transaction drawer based upon the Diebold model 131-85 Retail Window with 121-30 transaction drawer (5'-0"x5'-0" window opening). There is also a microphone modeled on the interior transaction surface. This is similiar to what you would see in a pharmacy drive through. I did not make this parametric because I did this for a specific instance.

Product Version: Unknown

23247 Downloads

Metal Panel turns an outside corner

No Rating

Product Version: Unknown

1403 Downloads

Parametric window surround including the ability to show a dashed line above the window indicating flashing.

Product Version: Unknown

10653 Downloads

This is a parametric detail component for a casement window section. The family is adjustable for window rough opening height and wall thickness.

This is base on the Eagle Window line.

This was created in Revit 2016

Product Version: Unknown

6483 Downloads

NOHS, stained glass window, contemporary window, red and black window

Product Version: Unknown

8168 Downloads

NOHS, stained glass window, contemporary window, red and black window

Product Version: Unknown

4200 Downloads

Sofa Steelcase Bix Corner 54"

Product Version: Revit Building 8

2876 Downloads

PVC profile corner cleaner CNC.

No Rating

Product Version: Revit Architecture 2016

1849 Downloads

This window family is fully parametric. You can adjust the angle of the opening, panel/frame/mullion material, the size of the mullion and frame and the thickness of the panel.

Product Version: Revit Architecture 2008

42923 Downloads

Same as previous Curtain Wall panel, but usable as parapet panels between floors.

Gives the choice of choosing either field or corner panel.

Usefull when one wants a structural glazing corner with no mullion.

Also, by clearing both types (corner or field panel) gives an empty panel.

Angle of junction - parametric.

No Rating

Product Version: Revit Architecture 2010

4164 Downloads

This window was used in a wall with brick veneer and is not adjustable.  There is an area of window left out to allow for a dbl door to be inserted.  This will allow for the window and door to be tagged seperately.

Product Version: Revit Architecture 2011

17457 Downloads

chain link fence corner

No Rating

Product Version: Unknown

9169 Downloads

Metal Panel Turns Inside Corner

No Rating

Product Version: Unknown

1046 Downloads

This default window set up with different type of brick sill where you can choose which one and you can make a double hung or sliding window infill with glass. also you can close gap the brick sill using stud wall to 1mm. It will save you time set up the brick sill. Make sure save as before you change the type of window. This is default only window.

Product Version: Unknown

34267 Downloads

An adjustable louvre window where you specify the maximum span for the louvre and the window will create the required number of bays. You can also specify the usual, size of louvres, angles, free air, material etc etc...

Product Version: Unknown

42651 Downloads

A window with a fully parametric brick arch.  This took quite a while to figure out, but I wanted to share it with anyone that wanted it.  The brick arch is fully parametric in that it will adapt to the width, height, or arch height of the window.  The number of bricks will also adapt depending on how wide/tall the window is.  The window itself can be adapted as needed.  Note.  This arch part of the window is made to be configured by the height of the arch, not by a radius.  I did this since I wanted to be able to specify a specific height for the arch to match brick coursing.   And of course feel free to change the window to an opening/door/whatever.  Just make sure you keep the main parameters.

Product Version: Revit Architecture 2009

22275 Downloads

This is a circle top window with a brick sill , a single row of soldier course around entire window and a KEYSTONE head peice.

Product Version: Unknown

36370 Downloads

Modern/Contemporary style window with adjustable muntin/mullion placement. Window can be set next to similar windows to make different arrangements.

All windows shown in thumbnail are the same family.

Product Version: Revit Architecture 2018

18997 Downloads

This is a picture window with an awning window above. The trim width is fully parmetric for the interior and exterior. There are only a few family types (sizes) created so feel free to add to it.

Product Version: Unknown

7437 Downloads

Single corner cabinet for use IN COMBINATION WITH this family: https://www.revitcity.com/downloads.php?action=view&object_id=18442

Note! When using both families you can create a kitchen shown in the image.

For some the previous discription above was not compleetly clear.

Product Version: Revit Architecture 2015

35810 Downloads