MIFAB Series FS1760, 12” Round x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

64 Downloads

PRICE CSRD Series combination supply / return directional diffusers are available with extruded aluminum louvered blades for supply air and an eggcrate core for return air. The performance characteristics are excellent; the diffuser handles a large amount of air for a given set of outside dimensions with low pressure drops and noise levels. The CSRD is sized to match rooftop air conditioners in the most popular capacities.

No Rating

Product Version: Revit MEP 2020

119 Downloads

This is my first upload so please be gentel.  This is a simple family that allows you to place a shower partition with a curb on 4 sides and glass for the partition, in a room.  You can change a lot,

• Curb Heights - independent on all 4 sides


• Curb depth


• Overall Height


• Overall Width (you should be able to use align and lock to make it stretch.


• 2 - Panel or 3- Panel glass partition


• Each partition door has a 2D 45 degree rep for plan view.


• Each partition configuration allows you to put in two override dimensions that I will try to explain.


• Override Panel Width - If you need one of the panels to be say "6" use this to do that.  When this is set to 0 it should return to equal equal.


• Override Door Width - If you need the door to be a certain width say 30" enter it here.

This model is not foolproof, although I did do a few basics to keep people out of trouble, like a minimum door height and glass thickness.  But if you try to specify a panel override width and a door override width on the 2 panel with the curbs locked to the wall it will probably break.  However if you do that on the 3 panel, the 3rd panel will take up the slack.

Please leave your comments for me.  Thanks.

Product Version: Revit Architecture 2013

18388 Downloads

landarchBIM

Chair to complete Site Furniture set, with Table and Umbrella.

Product Version: Revit Architecture 2014

8852 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Position: Hanging or StationaryThis cup was originally designed to be hung on hooks within an antique butler's pantry. However, it can also be used in a stationary setting by selecting one of the pre-set "Type" values or by setting the instance parameters (Height and Angle) to zero (0) degrees. This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Dimmensions", you can change the Height of the Cup (Height), Angle of the Cup (Angle of Cup), and the rotation of the handle (Handle Rotation). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish.

No Rating

Product Version: Revit Architecture 2020

942 Downloads

No Rating

Product Version: Revit Architecture 2019

64 Downloads

MIFAB Series FS1520-FL, 8” x 8” x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

139 Downloads

MIFAB Series FS1730, 12” x 12” x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

189 Downloads

MIFAB Series FS1740, 12” x 12” x 10” deep cast iron floor area and indirect sanitary waste drain complete withwhite acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

243 Downloads

MIFAB Series FS1760-FL, 12” Round x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior, loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

75 Downloads

MIFAB Series FS1730-FL, 12” x 12” x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior, loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

80 Downloads

MIFAB Series FS1740-FL, 12” x 12” x 10” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior, loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

84 Downloads

MIFAB Series FS1750-FL, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior, loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

70 Downloads

MIFAB® Series FS1720-FL, 12” x 12” x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

107 Downloads

Nested SL ventilator below Louvre & Exhaust space having 1 frames & 1 leaf panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator simply set Low Lite  Ht to zero.    Swing of Vent leaf is operable by setting 3D swing angle. Louvre params can also be operable. Exhaust inset can be change.Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

500 Downloads

MIFAB® Series F1320-C-TFB lacquered cast iron floor drain with anchor flange, standard 1” (25) thick, 9” (235) round, (specify material finish) tractor grate, and “True-Fit” sediment bucket designed so that grate cannot be set unless the sediment bucket is in position.

No Rating

Product Version: Unknown

18 Downloads

Andersen windows, basic sweeps are based on standard Andersen detail for 200 series, which generally matches 400 series. All units use same shared nested families, so take care when creating schedules. Rough openings are set to match Andersen 2008 catalog, this may result in some minor discrepencies for actual Unit dimensions. Generally their catalog allows for an extra 1/2" for the rough opening. I provided type catalogs for the casements, got lazy on the awnings. A triple awning can be created by copying the triple casement and reloading the awning nested family (save out of another family). I think I fixed the issue with how the windows are located, they should all have a "Finish Depth" parameter.

Three grille options are included, none, Prarie A and Fractional. New grilles are easy, they are a nested family (not shared) that are placed in the nested window unit(s). You'll see a type parameter in the hosted windows that lets you control which grille option you're using, the type parameter is actually switching the nested window unit, not just the grille.

Product Version: Revit Architecture 2009

6203 Downloads

MIFAB® Series F1640, 9” (229) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 9” (229) diameter lacquered cast iron adjustable top assembly and special duty ductile iron grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.

(For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

26 Downloads

This window is fully parametric, as the title suggests. You can change the window's width, height, material and style. It supports single hung, hanging sliding, and casement styles. It comes with built in trim, shutters(toggleable), and transoms(toggleable); all of which are also parametric for both size and material. Transoms include both square and arched transoms.

Notes:

All materials are set to default grey material by default, with the exception of the glass material.

I havn't figured out how to toggle off openings when toggling off transoms, so put your wall material into the windows type to cover up the opening left behind.

You should be careful when adjusting arched transom sizes. Make sure that the size you are trying to create is even possible.

I didn't include inside trim because it was no use to me, comment if you'd like me to do so.

Any and all suggestions are appreciated.

If you plan on editing the window to suite your needs better, feel free to do so, but a word of caution; there are a lot of hidden aspects, and even the most subtle of changes can cause constraint errors. You might be better off leaving a suggestion.

Looking Forward To:

-Arched shutters to match arch transoms.

-Another shutter style.

-More trim options.

-User suggestions.

Product Version: Revit Architecture 2012

14432 Downloads

MIFAB® Series F1640-L, 12” (305) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 12” (305) diameter lacquered cast iron adjustable top assembly and special duty ductile iron

grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.

(For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

96 Downloads

This door window fimily is dedicated to our PM Shri Narendra DD Modi

Nested door having 1 wooden door/window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

1099 Downloads

Please rate and comment, thanks!

Took a while to figure out how to get these to work properly.

The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.

The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com

Cans be individually rotated in project.

!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!

Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).

The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.

You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.

I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.

Hope these are helpfull for you!

Product Version: Revit Architecture 2017

1075 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

Product Version: Revit Architecture 2017

709 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

562 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

457 Downloads

No Rating

Product Version: Unknown

29 Downloads

First upload to the site. Let me know what you think. :)

I created this in response to Ystergesig query on how to adjust the radius of a coil. As I didn't know I set out to make a adjustable coil of my own. This family consist of three families Coil 1, Coil 2 and Blades.

The attached family has the following parameters than can be adjusted. Radius of the Coil (Default 500mm)Wire Thickness (default 10mm radius)Array (default 12)

Any queries let know. 

Shatner86

Product Version: Revit Architecture 2014

4794 Downloads

These Indian style archtop framed windows are created as per actual elements in use.

Banarasi archtop framed Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc. Arch height is set to vary in a limit & same for window width as well.

2  Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3.All shutters are provided with 2D & 3D swing. Window shutters are out swing as used in Indian culture.

4. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

5. Any querry can be done on my phone number 91 9919640999 Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

203 Downloads

These Indian style archtop framed windows are created as per actual elements in use.

Banarasi archtop framed Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc. Arch height is set to vary in a limit & same for window width as well.

2  Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3.All shutters are provided with 2D & 3D swing. Window shutters are out swing as used in Indian culture.

4. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

5. Any querry can be done on my phone number 91 9919640999 Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

138 Downloads

These Indian style archtop framed windows are created as per actual elements in use.

Banarasi archtop framed Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc. Arch height is set to vary in a limit & same for window width as well.

2  Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3.All shutters are provided with 2D & 3D swing. Window shutters are out swing as used in Indian culture.

4. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

5. Any querry can be done on my phone number 91 9919640999 Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

174 Downloads