This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  This is similar to my other family, but this one can be 2 units wide and an infinite number long. It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.

Product Version: Unknown

4531 Downloads

Never experienced adaptive components?!  Oh boy.

Try this out, or just inspect the family to see how it works.  This is a spline extrusion with 8 adaptive points, which means the sweep will regenerate in real time to pass through the 8 points wherever you set them.   It's quite fun to play with.  I should get back to work, honestly.

If you select the adaptive points, (you might have to tab) you get X-Y-Z grips to moved the path manually.

I've added 8 new parameters to control the diameters of the tube, and any differences in diameter between adaptive points will be smoothly transitioned. 

Product Version: Revit Architecture 2012

4222 Downloads

Work plane based shower and faucet fixture with mix valve for typical bathtub. I used the Rvt mix valve from Revit City, and created the faucet and shower head. The dimensions are loosely based on a Kholer fixture also on this site. Each component is a nested family so you can easily edit & modify. Connectors are included for DMHW & DMCW and type properties are set based on an Autodesk OOTB shower enclosure/fixutre.

Product Version: Unknown

6830 Downloads

A set of Gate with Trash & Post Compartment

Product Version: Revit Architecture 2010

11428 Downloads

.pat file for Board and Batten wall pattern (model patern).

The spacing in this file is set at 12".  If you want to increase the spacing, just edit the .pat file in Notepad and change the 12s to whatever you want the spacing to be.  Credit Robert Cloward for the original code.

Product Version: Unknown

969 Downloads

Series FS-700 8 in. (203mm) round x 3 in. (76) deep flanged sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub(standard) outlet.

No Rating

Product Version: Revit Structure 2014

153 Downloads

Series FS-730 12 in (305mm) square x 6 in (152mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

150 Downloads

Series FS-740 12 in. (305mm) square x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

163 Downloads

Series FS-760 12 in. (305mm) round x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

206 Downloads

Series FS-770 4 in. x 8 in. (102 x 203mm) rectangular x 4 in. (102mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

160 Downloads

Series FS-710 8 in. (203mm) square x 6 in. (152mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

103 Downloads

Series FS-750 12 in (305mm) square x 10 in (254mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

86 Downloads

Series FS-850 16 in(406mm) square x 12 in (305mm) deep flanged sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate,aluminum dome bottom strainer, and no hub outlet.

No Rating

Product Version: Revit Structure 2014

76 Downloads

Nested door having 2 door frames & 2 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2013

14508 Downloads

Nested door having 2 door frames & 3 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2013

22020 Downloads

Nested door having 2 door frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2013

13034 Downloads

This Glass and Steel Awning utilizes 3 components to set the piece up. All are generic wall based components so they will need a wall backing for them to work.

Awning Frames - is actually just the beam that sits against the wall

Awning Beams - is the module used to fill in the awning.

Awning Beams w-Tension Rods - To show the Tension rod structure at the ends and intermediate as you choose

The canopy's are parametric in "beam to beam" width and material properties but not in length or any others. If you want to modify them fix them in families or build your own ; )

Product Version: Revit Architecture 2014

18002 Downloads

My best recreation of the Ricardo Conversation Sofa from King Hickory furniture.  Cushion are really hard to make look right! lol

Non-para.  Materials can be set for seat cushion, seat backs, body back and front deck, arms and outside body panel.

Made this for my wife who is an interior design student.  Hopefully it helps some others out there.

Product Version: Revit Architecture 2017

1941 Downloads

I have taken a manufacturers family - redrew it - so every curve is tangentle to other planes - hence with lines on - no lines between formed surfaces. This is how drawing should be. When 3D view set at Scale 1:1 - therefore no thick line work. In this instance no linework turned on anyways.

Manufactured items in sheetmetal, plastics, timber etc, it is vare rare to have a sharp corner on it. All planes should have a radiused chamfer - just look around your office - hard to find two surfaces coming together with sharp edge. 

Have posted this here solely to assist others on how to draw and also how to display.

To many rubbish families posted here - learn and create each one better than the last one.

Any comments - feel free - 

Product Version: Revit Architecture 2014

9635 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  This is similar to my other family, but this one will only have 4 skylights. It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.  I have created another family for 2x2 units (4 skylights total) that is parametric also.

No Rating

Product Version: Revit Architecture 2013

15379 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

11264 Downloads

Series FS-720 8 in (203mm) round x 6 in (152mm) deep cast iron sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (MJ)

No Rating

Product Version: Revit Structure 2014

132 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  This is similar to my other family, but this one will only have 4 skylights. It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.  I have created another family for 2x2 units (4 skylights total) that is parametric also.

Product Version: Unknown

7585 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Both, Large, or SmallThis is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can select which plates you want visible (Plate 1, 2, or leave both checked). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish.

No Rating

Product Version: Revit Architecture 2020

953 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  This is similar to my other family, but this one will only have 4 skylights. It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.  I have created another family for 2x2 units (4 skylights total) that is parametric also. (All parameters now work)

Product Version: Revit Architecture 2014

4411 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  This is similar to my other family, but this one can be 2 units wide and an infinite number long. It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable. (All parameters work and made 2x number of units not adjustable)

No Rating

Product Version: Unknown

1893 Downloads

This is a roof hosted family modeled from Boardwalk Systems NZ Ltd modular walkway / platform system.  Used as a service access walkway or light plant platform in light commercial, industrial & large residential applications.  Adjust the offset from the roof in the element properties dialogue under roof thickness, once set the board will sit flush to the roof.  If you have any problems with this family please notify me.  Created in Revit Architecture 2010

No Rating

Product Version: Revit Architecture 2010

3916 Downloads

Insertion-Style: Face-Based. Parametric: Width, Depth, Height, and Material. Types: Hinged or Top-Sliding. Visibility: Coarse, Medium, and Fine varries. While the box itself is fully-parametric, the shoe-support is not. That is why I decided to make the box un-breakable by using "if" statements. That is to say, if a dimension becomes smaller than the shoe-support, it will revert to a pre-set value. Regarding the visibility, it will progressivley loose details as-needed (showing up as a simple box when "Coarse" is selected). 

No Rating

Product Version: Revit Architecture 2020

255 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

8754 Downloads

Basic revit couch family, with parameters for width, depth, fabric material, leg material.  Can also choose between single and double cushion option.  

I wanted something less-blocky for walk-throughs with clients, and have found this is pretty useful.  Based off of Stanford model I purchased in 2018.

Note: If you simply make a smaller type with appropriate dimensions, it's a nice matching chair for your living room set.

Keywords: Couch, Sofa, Chair, Loveseat, Mid Century, Modern, Living Room, Lounge, Furniture

Product Version: Unknown

31499 Downloads