 |
Outdoor Table found in Grindelwald, Switzerland - part of set |
No Rating |
Product Version: Unknown
18 Downloads
|
|
 |
Set for materials. Includes Mooring rope with hide function. |
|
Product Version: Revit Structure 2016
2122 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
135 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
72 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
59 Downloads
|
|
|
 |
This is a tower section which is 99% parametric. You can adjust the column thickness, overall width and length. The beams will adjust with the column dimensions. This tower section is placed as a "column".
A couple things:
1) The crossmember thickness is not adjustable. I don't know, i just had a hard time trying to set it up. If anyone wants to take it and run with it, please do.
2) To make a tall tower you simply stack these columns, if you want to adjust the height of a section you can set its offset from the level its on, then you have to adjust the column height to match. Simply changing the column height will NOT change the height of the section.
It's my first attempt at a parametric object. |
|
Product Version: Revit Architecture 2013
2728 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
74 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
59 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
68 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
119 Downloads
|
|
|
 |
Outdoor Bench with Back found in Grindelwald, Switzerland - part of set |
No Rating |
Product Version: Unknown
11 Downloads
|
|
|
 |
This is a parametric generic model family based on Victor Pallet Racking, unit is set as a 3.6m high unit & has two shelving levels. Height, depth & width are parametric, shelving beams remain top & centre of unit. Materials are to be set as type parameters. Model elements not visable in plan view or coarse view settings, indicated in plan by dashed grey lines. keywords: racking, pallet, shelving, victor, storage, industrial, commercial, bulk storage. |
|
Product Version: Revit Architecture 2010
7036 Downloads
|
|
|
 |
Contains 10, 20 & 40 Foot variations with High Cude variations as well.
This version has been fixed to ensure the Height takes into account the roof thickness. I've used a parametric workaround for that rather than re model the whole thing - since the original height setting was created by someone else
Param for door Visibility settings of components with additional Course View and plan view settings to help create clearer graphics. Metric Units. Rationalise Material naming & asset
NOTE: Visibility of roof set to show in Coarse view so that it can been seen in site-plan type views set to turn off in other views to ensure internal volume can be seen. |
|
Product Version: Revit Architecture 2014
14815 Downloads
|
|
|
 |
Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc. etc. Lallan Ji
Most params are shared Params |
|
Product Version: Revit Architecture 2013
1234 Downloads
|
|
|
 |
Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc. etc. Lallan Ji
Most params are shared Params |
|
Product Version: Revit Architecture 2013
2656 Downloads
|
|
|
 |
This is a sketchup model converted to revit. I set materials and peramaters. Tell me what you think below! Please Rate! |
No Rating |
Product Version: Revit Structure 2017
2235 Downloads
|
|
|
 |
Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. |
No Rating |
Product Version: Revit Architecture 2020
2586 Downloads
|
|
|
 |
Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. |
No Rating |
Product Version: Revit Architecture 2020
1615 Downloads
|
|
|
 |
Go to Kolbe's website for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
No Rating |
Product Version: Revit Architecture 2012
1016 Downloads
|
|
|
 |
Go to Kolbe's website for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
No Rating |
Product Version: Revit Architecture 2012
926 Downloads
|
|
|
 |
A Pretty Simple Wall Based Family to place a Mantel (No Fireplace Surround) on a wall above a fireplace. Family has basic parameters for materials, width and depth of mantle piece. The design is just a quick simple Sketched Profile based on an existing job I was trying to match, but you can obviously change it to whatever profile you like...If you change the profile be sure to check and realign/lock the extruded top piece to the back of the profile to maintain a solid top. Hope that helps someone...there was really nothing here before. Also, sorry this is in 2014...I don't have an older version available on this computer. |
|
Product Version: Revit Architecture 2014
4137 Downloads
|
|
|
 |
ADDITIONAL PARAMETERS // MATERIALS
20 FREE NEW FAMILIES // DOWNLOAD AT THECREATIVEROUTE.COM
|
|
Product Version: Revit Architecture 2018
7019 Downloads
|
|
|
 |
renders nice, the only set back is, that its a sketch up model and the glass and tires share the same material... Enjoy! |
|
Product Version: Revit Architecture 2012
5491 Downloads
|
|
|
 |
Traditional Bedroom set. 1 of 3 pieces |
|
Product Version: Revit Architecture 2013
14962 Downloads
|
|
|
 |
Traditional Bedroom set. 1 of 3 pieces |
|
Product Version: Revit Architecture 2013
7925 Downloads
|
|
|
 |
Thank you for downloading |
|
Product Version: Revit Architecture 2015
4593 Downloads
|
|
|
 |
Used for a school project so dimensions are set for the project(non parametric) |
|
Product Version: Unknown
3626 Downloads
|
|
|
 |
40 by 60 ampitheater. Comes set for your standard production. |
|
Product Version: Unknown
626 Downloads
|
|
|
 |
Water fountain off-set from wall for indented areas |
No Rating |
Product Version: Unknown
3582 Downloads
|
|
|
 |
8 white concrete curbing pieces to set |
No Rating |
Product Version: Revit Architecture 2014
1561 Downloads
|
|
|
Search