Series LFF127W Flanged High Capacity Water Pressure Reducing Valves are used in commercial and industrial applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. They have a triple-coated corrosion preventative Lead Free* iron body construction with flanged inlet and flanged outlet connections, replaceable disc, interchangeable diaphragm chamber, replaceable stainless steel seat, and stainless steel stem. Size 4 in. is tapped for a bypass line and an auxiliary regulator. Maximum Working Pressure: 175psi (12.06 bar), Adjustable Reduced Pressure Range: 25 to 100psi (1.7 to 7.0 bar).

No Rating

Product Version: Revit MEP 2014

206 Downloads

Series 152A Process Steam Pressure Regulators are used in commercial, industrial, and institutional applications to regulate steam pressure in autoclaves, steam tables/irons, vulcanizers and large capacity process services. They are highly sensitive to reduced pressure changes. They have an iron body construction with NPT threaded female inlet and outlet connections, stainless steel strainer, laminated metal diaphragm, and sensitivity adjustment feature for critical flow. Series 152A offers full volume with minimum pressure drop and in-line serviceability. It is ideal for use on sterilizers, process lines, testing fixtures, and oil lines. Tight seating Model 152A-T available for dead end and liquid services. Maximum Supply Pressure: Up to 200psi (13.8 bar).

No Rating

Product Version: Revit MEP 2014

300 Downloads

http://www.eaton.com

NEMA TP-1 transformers are typically installed in commercial construction, as well as in educational (K–12 and universities), government and industrial facilities. NEMA TP-1 compliant transformers are especially designed to have low no-load (core) losses.

No Rating

Product Version: Revit Architecture 2011

1558 Downloads

Series FBV-4 & FBVS-4 2-Piece, Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE. Model FBV-4 has threaded end connections and is NSF & CSA approved. Model FBVS-4 has solder end connections and is NSF approved. Pressure Rating for 1/4 in. ‒ 2 in. (8 ‒ 50mm) is 600psi WOG and 150psi WSP. 2 1/2 in. ‒ 3 in. (65‒80mm) is 400psi WOG and 125psi WSP.

Product Version: Revit MEP 2014

1320 Downloads

This family is a simple parameter-controlled solid surface vanity (based on Swanstone dimensions).  

Family includes both surface-mounted and wall-mounted faucents, which can be toggled on/off with Type Parameters.  Faucet uses Symmons faucets, which can be switched out by editing the family if needed.

Vanity dimensions, backsplashes, faucets, meterials and basin offset can all be controlled with parameters.  

Family does not include casework below.

Simple Look in plan/elevation works for a lot of our uses-- hopefully it'll help you too!

Thanks

Keywords: Counter, Sink, Faucet, Solid Surface, Vanity, Bathroom

No Rating

Product Version: Revit Architecture 2020

3225 Downloads

Series LFB6000 & LFB6001 Lead Free* 2-Piece, Standard Port, copper silicon Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining 316 stainless steel stem and standard port orifice that ensures minimal pressure drop. Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model LFB6000 has threaded NPT end connections and Model LFB6001 has solder end connections. Pressure Rating for 1/4 to 3 in. (8 ‒ 80mm) is 600psi WOG (non-shock) and 150psi WSP. 4 in. (100mm) is 400psi WOG (non-shock) and 125psi WSP.

No Rating

Product Version: Revit MEP 2014

117 Downloads

Series LF530C Lead Free* Calibrated Pressure Relief Valves are used in commercial, residential, and industrial applications to protect against excessive pressure in systems containing water, oil, or air. They have a Lead Free* brass body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series LF530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for by-pass thermal expansion pressure relief (not ASME approved). Maximum Pressure: 300psi (20.67 bar). Adjustable Pressure Ranges: Sizes 1/2, 3/4 in. - 50 to 175psi (3.45 to 12.06 bar); Size 3/4 in. - 100 to 300psi (6.89 to 20.67 bar).

No Rating

Product Version: Revit MEP 2014

258 Downloads

Series FBV-3C & FBVS-3C 2-Piece, Full Port, Brass Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, virgin PTFE seats, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated brass ball, brass adapter, and steel handle. Model FBV-3C has threaded end connections. Model FBV-3C-TH has tee handle with threaded and solder connections. Model FBVS-3C has solder end connections. Pressure Rating for 1/4 in. ‒ 2 in. (8 ‒ 50mm) is 600psi WOG and 150psi WSP. 2 1/2 in. to 4 in. (35 ‒ 100mm) is 400psi WOG and 125psi WSP.

No Rating

Product Version: Revit MEP 2014

1304 Downloads

Series ISCA-550 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

61 Downloads

Series ISCA-560 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting plate and brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

59 Downloads

Wind turbine 6 feet in diameter, wall constraint  

Some people say that wind turbines are a sore eye, but what if you place wind turbines in commercial sculptures or contemporary pillars/monoliths, we can have them but almost hiding them.

Product Version: Revit Structure 2012

2431 Downloads

The Brookfield 60", double sink, Antique Black vanity by James Martin Furniture features hand-carved accenting filigrees and raised panel doors. Two doors, on either side, open to shelves for storage below and three center drawers, made up of a lower double-height drawer and both middle and top standard drawers, offer additional storage space. The look is completed with Antique Brass finish door and drawer pulls. Each cabinet is configured to work with our variety of either 2cm, 3cm, or a 4 cm countertops. The matching decorative wood backsplash is included.

No Rating

Product Version: Revit Architecture 2020

6415 Downloads

Series LFN223B, LFN223BS Lead Free* High Capacity Water Pressure Reducing Valves are used in commercial, industrial, and institutional applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a triple-coated corrosion preventative Lead Free* cast copper silicon alloy body construction, an enlarged diaphragm, spring cage and seat orifice for super capacity performance, sealed spring cage for waterworks pit installations and thermal expansion bypass. Available with NPT threaded female inlet x NPT threaded female outlet with (LFN223BS) or without (LFN223B) strainer. Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting: 50psi (345 kPa).

No Rating

Product Version: Revit MEP 2014

131 Downloads

About the Revit Family

This is a parametric ‘CNC’ table. The following are adjustable:

• Top: rectangle or oval


• Top: width and height (make these equal for a round or square top)


• Top cross: sets the size of the cross in the top


• Leg height and width


• Leg cross brace: sets the depth of the brace at the top of the leg


• Material thickness: this adjusts the size of the mortars and tension joint to accommodate different material thickness

How to use this on the CIT laser cutter

1. Import the family and place in Revit view


2. Adjust the sizes of the legs and top as desired – noting you’ll need both a Type A and Type B leg


3. Adjust the material thickness to accommodate your chosen material


4. Set the scale of the view to size of the final print, ie 1:50


5. Export the view to DXF or Illustrator for adjusting line weights and printing

About

Designed by Andrew Remely - visit remely.com.au

Rights info - This work is licensed under a Creative Commons Attribution-Non Commercial-Share Alike 4.0 International License - for more information remely.com.au/copyright

Product Version: Revit Architecture 2018

484 Downloads

Series LF40L, LF40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LF40L has a short thermostat for installation directly in available tank tapings. Model LF40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series LF40L, LF40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

173 Downloads

Series LFLL40XL, LFLLL40XL Extended Shank Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* cast copper silicon alloy with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LFLL40XL is available in sizes 3/4 and 1 in. (20 and 25mm). Model LFLLL40XL is available in size 3/4 (20mm) with an extra long extended shank. Series LFLL40L, LFLLL40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

89 Downloads

Dyson Airblade™ Tap 110-120V Hand Dryer - Short AB09 With Airblade technology in a tap, hands can be dried at the sink in 14 seconds. Water isn't dripped on the floor with Dyson Airblade Tap hand dryer because you don't need to move to a separate drying area. Costs less to run and has a small carbon footprint compared to other hand dryers. Dyson Airblade saves space and features touch-free operation. Ideal for minimalistic restrooms, new or fully-refurbished. 11-5/8"W x 11-2/16"D x 6-1/4"H. Stainless steel finish. 5-year parts and 5-year labor limited manufacturers warranty.

No Rating

Product Version: Revit Architecture 2018

1228 Downloads

I bring you today the iconic Panton Bachelor Chair. Revit 2017.

 Want to see the making of this family? https://www.youtube.com/watch?v=_CrgSlgyACE&t=10s

Feel free to use this family for personal or commercial uses.

Your support is appreciated: https://www.patreon.com/user?u=4579022

No Rating

Product Version: Unknown

464 Downloads

MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

25 Downloads

CEILING HEATER – SURFACE MOUNTED

High Efficiency Ceramic Infrared Panels

The CeramiCircuit™ Ceiling Heater fixes on the upper interior surface of a room. The Ceiling Heater’s position allows for a wide and even distribution of heat. In just 5 to 7 minutes, the room’s objects and you are fully bathed in radiant heat, so you can focus on the day ahead in maximum comfort. Our Surface Mounted Heater works great in both commercial and residential settings.

Radiant Electric Heat

Product Website: http://electricheat.com/products/ceiling-heater-surface-mounted/

Product Cutsheet: http://electricheat.com//wp-content/uploads/2013/12/Ceiling-Surface-Mount-Cut-Sheet.pdf

Product Version: Revit Architecture 2012

1822 Downloads

Some Ikea furniture. Parametric materials.

Download texture from here -> https://www.textures.com/download/woodfine0025/19802

TV not included. It's included in default Revit Libraries

 Want to see the making of this family? https://www.youtube.com/watch?v=61Zar1Ccg7A&t=7s

 Feel free to use this family for personal or commercial uses.

Product Version: Revit Architecture 2017

3387 Downloads

SIOUX CHIEF MANUFACTURING

Square Max™ PVC Square Floor Sink -Face Based

siouxchief.com

Product Version: Revit Architecture 2010

416 Downloads

Contents:

Cabinet with  doors

• Dimensions are parametric, depth, height, width, handle placement


• Materials: cabinet, door, handle

Cabinets Drawers

• up to five drawers with visibility


• dimensions are parametric; depth, height, width, drawer height


• drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.


• Materials are parametric

Plinth

• Parametric dimensions (instance) material parameter.

Worktop L shape (with/without sink)

• Lengths, depths, heights, and thickness all instance parametric

Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric

Misc parts face based

1. Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)


2. coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials


3. coffee mug: fixed dimensions, parametric materials


4. Microwave; fixed dimensions, parametric materials


5. faucet: fixed dimensions, parametric materials based upon an old Sphinx one

Misc generic model

1. Sink: parametric (instance) dimensions and height based upon floor height.

For any qeustions, 'bugs' etc. contact me by personal message

disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.

Notice: Everything under constraints is calculated and should be left alone.

standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.

Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this.

No Rating

Product Version: Revit Architecture 2016

3152 Downloads

Product Version: Revit Architecture 2010

891 Downloads

Product Version: Revit Architecture 2010

682 Downloads

CERAMICIRCUIT™ HEATERS – LAY-IN

High Efficiency Ceramic Infrared Panels

The CeramiCircuit™ Lay-In Ceiling Heater is ideal for institutional and commercial application where acoustical tile ceilings exist. Install a few units to address a cold spot, or use them as the primary heat source in an office.

Radiant Electric Heat

Product Website: http://electricheat.com/products/ceiling-heater-lay-in/

Product Cutsheet: http://electricheat.com/wp-content/uploads/2015/09/1624CL-Cut-Sheet-9.2015.pdf

3-Part Specification: http://electricheat.com/wp-content/uploads/2015/09/238330-REH3-part-Specification-9.30.2015.pdf

Submittal Sheet: http://electricheat.com/wp-content/uploads/2015/09/Ceiling-Submittal-Sheet-9.2015.pdf

Operation Manual Installation Instructions: http://electricheat.com//wp-content/uploads/2013/12/1624CL-Drop-In-OM-WEB1.pdf

No Rating

Product Version: Revit Architecture 2012

622 Downloads

SERGIO ROMA - Round Gooseneck Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

4772 Downloads

SERGIO VELO - Oval Gooseneck Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

4050 Downloads

SERGIO URBA - Square Goosemeck Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

4375 Downloads

SERGIO EGO - Sink Mixer

WELS Rating: WELS 3 star rating

Supplied with: 40mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

5347 Downloads