 |
SIOUX CHIEF MANUFACTURING
Finish Line Drain™ Adjustable Floor Drain, Ductile Iron No-Hub Connection, Small Top (Square Strainer) - Face Based
siouxchief.com |
|
Product Version: Revit Architecture 2010
953 Downloads
|
|
 |
SIOUX CHIEF MANUFACTURING
Finish Line Halo Drain™ Adjustable Floor Drain with Deck Flange (Round Strainer) - Face Based
siouxchief.com |
|
Product Version: Revit Architecture 2010
573 Downloads
|
|
|
 |
شركة تنظيف منازل بالدمام شركة رش مبيدات بالجبيل شركة رش مبيدات بالدمام شركة مكافحة النمل الابيض بالدمام شركة مكافحة حشرات بالجبيل شركة مكافحة حشرات بالدمام شركة نقل اثاث بالدمام شركة نقل اثاث براس التنورة شركة مكافحة الصراصير بالدمام شركة مكافحة الفئران بالدمام شركة مكافحة البق بالدمام شركة مكافحة النحل بالدمام شركة مكافحة العته بالدمام |
No Rating |
Product Version: Revit Architecture 2015
136 Downloads
|
|
|
 |
MIFAB® Series MI-HUB (specify size) shielded no hub couplings are manufactured with gaskets made with neoprene that meets the requirements of ASTM C-564 housed inside a Type 301 stainless steel corrugated shield. Two (2” through 4” size), four (6” through 10” size) or six (12” sizes) Type 301 stainless steel clamps tightened with 5/16” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-HUB Series Couplings are tested and certified to the ASTM-C1277-2018, CISPI 310-2010, CSA B602-2010 (File # 247608) and B70 Standards. They are listed with IAPMO and NSF certified CISPI 310. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2-07 “Smoke Test.” |
No Rating |
Product Version: Unknown
21 Downloads
|
|
|
 |
MIFAB® Series MC-10D-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
17 Downloads
|
|
|
 |
SIOUX CHIEF MANUFACTURING
Finish Line Drain™ Adjustable Flashing Drain, Above Grade, Small Pattern (Round Strainer) - Face Based
siouxchief.com |
|
Product Version: Revit Architecture 2010
465 Downloads
|
|
|
 |
SIOUX CHIEF MANUFACTURING
Finish Line Cleanout™ Adjustable Cleanout, Ductile Iron No-Hub Connection (Round Strainer) - Face Based
siouxchief.com |
|
Product Version: Revit Architecture 2010
1040 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
|
Product Version: Revit Architecture 2008
7219 Downloads
|
|
|
 |
MIFAB® Series MHY-60 (specify length) A.S.S.E. 1019-B certified self draining, non freeze, lawn/ground hydrant with A.S.S.E . 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty galvanized steel pipe, heavy duty chrome plated bronze head casting, polished chrome plated face plate and satin finished nickel bronze box with hinged locking cover. Operating key furnished with each hydrant opens the hydrant, box and prevents unauthorized use. Hydrant inlet connection complete with drain port tapped for 1/8” (3) N.P.T. |
No Rating |
Product Version: Unknown
95 Downloads
|
|
|
 |
MIFAB® Series HY-6000-NPB (specify length) A.S.S.E. 1019-B certified self draining, non freeze, lawn/ground hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty galvanized steel pipe, heavy duty chrome plated bronze head casting, polished chrome plated face plate and satin finished nickel bronze box with hinged locking cover. Operating key furnished with each hydrant opens the hydrant, box and prevents unauthorized use. Hydrant inlet connection complete with drain port tapped for 1/8” (3) N.P.T. |
No Rating |
Product Version: Unknown
96 Downloads
|
|
|
 |
MIFAB® Series MHY-61 (specify length) A.S.S.E. 1019-B certified self draining, non freeze, lawn/ground hydrant with A.S.S.E . 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty galvanized steel pipe, heavy duty chrome plated bronze head casting, polished chrome plated face plate and satin finished nickel bronze box with hinged locking cover. Operating key furnished with each hydrant opens the hydrant, box and prevents unauthorized use. Hydrant inlet connection complete with drain port tapped for 1/8” (3) N.P.T. |
No Rating |
Product Version: Unknown
42 Downloads
|
|
|
 |
MIFAB® Series MHY-61 (specify length) A.S.S.E. 1019-B certified self draining, non freeze, lawn/ground hydrant with A.S.S.E . 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty galvanized steel pipe, heavy duty chrome plated bronze head casting, polished chrome plated face plate and satin finished nickel bronze box with hinged locking cover. Operating key furnished with each hydrant opens the hydrant, box and prevents unauthorized use. Hydrant inlet connection complete with drain port tapped for 1/8” (3) N.P.T. |
No Rating |
Product Version: Unknown
35 Downloads
|
|
|
| |
In 1929 at the Salon d-Autumne in Paris, Le Corbusier and his team of designers presented a revolutionary collection of furniture that stunned the city. Among the pieces was the ethereal yet bold LC6 Table (1928), a mathematically refined structure of steel and glass that has become one of the most important International Style tables of the 20th-century. Made of aeronautical steel, the base is welded for a seamless finish with sculpted angles and smooth, mitered corners. The table base is height adjustable for a total table height ranging from 27" to 29". The tabletop is a .6" thick rectangle of Italian glass, making the LC6 equally right as a dining table and in the conference room. Together the elements create a sense of line, scale and proportion unsurpassed by other designs. Each piece is signed and numbered and, as a product of Cassina's Masters Collection, is manufactured by Cassina in Italy under exclusive worldwide license from the Le Corbusier Foundation. |
No Rating |
Product Version: Revit Architecture 2009
4223 Downloads
|
|
|
 |
MIFAB® Series MI-QHUB (specify size) no hub couplings are manufactured with Quick Hub gaskets made with neoprene and three sealing rings that meets the requirements of ASTM C564 housed inside a Type 301 stainless steel corrugated shield. Two (2” through 4” size), four (6” through 10” size) or six (12” sizes) Type 301 stainless steel clamps tightened with 5/16” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-QHUB Series Couplings are tested and certified to the ASTM-C1277, CISPI 310, NSF and CSA B602 (File # 247608) Standards and are listed with IAPMO. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2 “Smoke Test.” Patented Pipe Clamp for joining all types of pipe. |
No Rating |
Product Version: Unknown
42 Downloads
|
|
|
 |
SIOUX CHIEF MANUFACTURING
Finish Line Drain™ Adjustable Floor Drain, Ductile Iron No-Hub Connection, Small Top (Round Strainer) - Face Based
siouxchief.com
|
|
Product Version: Revit Architecture 2010
657 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
|
Product Version: Unknown
5753 Downloads
|
|
|
 |
MIFAB® Series MC-54 wall mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with fabricated steel wall plate, welded steel nipples with set screws, and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
123 Downloads
|
|
|
 |
MIFAB® Series F1130C lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard reinforced (specify diameter), (specify material finish) strainer, and standard reinforced 5” (127) diameter (specify material finish) top assembly floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal. |
No Rating |
Product Version: Unknown
38 Downloads
|
|
|
 |
The beautiful Voilà wall sconce featuring a glass shade. Varying interior and exterior surfaces result in an exciting juxtaposition of light and shadow. Parameters include options for 2 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
21489 Downloads
|
|
|
 |
If you want to get away from having Bench Tops/Counter Tops with Parametric holes for Sinks
I have added a piece of Bench Top to my Sinks; it is fixed Parametrically so that for a bigger or smaller sink the bench part adjusts with it.
The Bench part to my Sink has very specific parameters, the Bench Thickness is "Instance", it has a "Yes/No" Type parameter, (always switched off.) plan view is "Unticked", it is attached to the "Top of Counter Top" reference plane as is the Sink, the part is shaped with rounded corners (As the Counter Cut Outs would be)
The sink is added into the Project just as normal, just place it onto your Counter Top in the position you want; At this point your counter Top will pass through you sink!
Now all you have to do is use the REVIT "Cut Geometry" sellect your Counter Top, then the Sink and "WHALLA", you now have your "Counter Top" with a Cut Out, this approach allows you to move the sink and the cut out moves with it, if you delete the sink the Bench is repaired, (No Hole). (If you Hide the Sink Your Bench Top should have a Hole in it)
|
|
Product Version: Revit Architecture 2012
5545 Downloads
|
|
|
 |
MIFAB® Series MC-51 wall mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron adjustable wall plate, adjustable steel nipples with locknut and set screws, and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
45 Downloads
|
|
|
 |
MIFAB® Series MC-41D-R floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
33 Downloads
|
|
|
 |
MIFAB® Series MC-53 wall mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron adjustable wall plate, backing plates, adjustable steel nipples with locknut and set screws, and fixture leveling, locking and mounting hardware.
|
No Rating |
Product Version: Unknown
37 Downloads
|
|
|
 |
MIFAB® Series MC-55 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs, backing plates and fixture leveling hardware.
|
No Rating |
Product Version: Unknown
50 Downloads
|
|
|
 |
MIFAB® Series MC-41-R floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
28 Downloads
|
|
|
 |
MIFAB® Series MC-42-R floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
46 Downloads
|
|
|
 |
MIFAB® Series MC-42 floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
22 Downloads
|
|
|
 |
MIFAB® Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
18 Downloads
|
|
|
 |
MIFAB® Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
MIFAB® Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
24 Downloads
|
|
|
Search
