MIFAB® Series F1100-C-ER( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and extended rim (specify diameter), satin finished nickel bronze strainer with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-ER Series.)

No Rating

Product Version: Unknown

12 Downloads

MIFAB® Series F1100-C-ER( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and extended rim (specify diameter), satin finished nickel bronze strainer with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-ER Series.)

No Rating

Product Version: Unknown

12 Downloads

MIFAB® Series F1100-C-FC( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and “FC” (specify diameter) round, reinforced satin finished nickel bronze strainer with surface membrane clamp and vandal resistant, allen key screws. (For non-membrane floors, use MIFAB F1100-FC Series.)

No Rating

Product Version: Unknown

53 Downloads

MIFAB® Series MI-SAND/OIL____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sand and oil interceptor with a holding capacity of - see chart below. Interceptor complete with gasketed non-skid powder epoxy coated lid, removable sediment bucket with perforated baffle beside inlet, deep seal trap with integral sewer gas stopper, two 2” vent connections, adjustable oil draw off assembly and no hub inlet/outlet.

No Rating

Product Version: Unknown

231 Downloads

MIFAB® Series R1150 combined roof drain and secondary overflow system, consisting of a galvanized sump receiver; two lacquered cast iron roof drain bodies with anchor flanges, cast iron waterproofing membrane clamp rings with integral gravel stops, one 4” (102) diameter adjustable ABS overflow standpipe and two self-locking metal dome strainers with a free area of 43 square inches each.

No Rating

Product Version: Unknown

1146 Downloads

This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.

There are 2 tags. 1 for rooms, 1 for egress doors.

There are 4 schedules

1.      DOOR EGRESS SCHEDULE

2.      FACILITY OCCUPANCY SCHEDULE

3.      ROOM OCCUPANCY COMPARE SCHEDULE

4.      SPACE OCCUPANCY CLASSIFICATION

There is one sample Model.

Steps:

1.      Copy the schedules and tags to your current project.

2.      Open the Room occupancy compare schedule

3.      Select what type of area you see fit.

4.      Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants

5.      Manually type in tag value to match calculation to populate the room tag.

6.      Place the facility schedule on the code plan sheet.

7.      Place the Door egress schedule on the sheet too.

8.      Place all your room tags

9.      Place your egress door tags on 1 exit way door only per egress area

10.   Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)

11.   Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)

12.   The Facility Schedule will populate.

13.   Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.

You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com

Product Version: Unknown

4005 Downloads

MIFAB® Series F1100-C-T(*)-3 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, cast iron membrane clamp with primary and secondary weepholes for waterproofing membrane, and heavy duty, solid, gas tight, spanner wrench, vandal proof, stainless steel cover for secured access. (For non-membrane floors, use MIFAB F1100-T Series.)

No Rating

Product Version: Unknown

34 Downloads

MIFAB®  C1100-S Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and square scoriated combined cover and plug top assembly (specify material type) with stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

111 Downloads

MIFAB® Series R1200-PR15” lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, square adjustable collar and standard 15” (381) square ductile iron tractor grate with 3/8” (9) maximum width drainage slots and a free area of 80 square inches.

No Rating

Product Version: Unknown

171 Downloads

MIFAB® Series F1100-C-EG lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 4” (102) x 9” (235) oval (specify strainer finish) open throat funnel with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-EG Series.)

No Rating

Product Version: Unknown

15 Downloads

MIFAB® Series F1100-C-EG lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 4” (102) x 9” (235) oval (specify strainer finish) open throat funnel with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-EG Series.)

No Rating

Product Version: Unknown

16 Downloads

MIFAB® Series R1250 lacquered cast iron extra deep sump high flow roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

75 Downloads

MIFAB® Series MI-SOLID-SA side access Type 304 14 gauge stainless steel solids interceptor with internal stainless steel perforated sediment bucket connected to a removable and gasketed side access latched lid. Interceptor complete with 2” female threaded inlet, 2” female threaded outlet on each side for right or left hand installation and internal stainless steel flow control.

No Rating

Product Version: Unknown

23 Downloads

MIFAB® Series R1200-G lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

69 Downloads

MIFAB®  C1100 Series (specify top assembly design) adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and scoriated combined cover and plug top assembly (specify material type) with stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for membrane clamp.)

No Rating

Product Version: Unknown

62 Downloads

MIFAB® C1100-T Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and round scoriated combined cover and plug top assembly (specify material type) with 1/8” recess for tile and stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

44 Downloads

MIFAB® Series F1100-C-FT6-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced 6” (152) diameter satin finished nickel bronze strainer with 1/8” (3) recessed tile flange, and vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-FT Series.)

No Rating

Product Version: Unknown

63 Downloads

MIFAB® Series F1100-C-SD lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced, (”SD6”) square 6” x 6” (152 x 152) (specify material finish) strainer with solid hinged cover and secondary grate. (For non-membrane floors, use MIFAB F1100-SD Series.)

No Rating

Product Version: Unknown

135 Downloads

MIFAB®  C1100-TS Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and square scoriated combined cover and plug top assembly (specify material type) with 1/8” recess for tile and stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

37 Downloads

MIFAB®  C1100-TS Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and square scoriated combined cover and plug top assembly (specify material type) with 1/8” recess for tile and stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

28 Downloads

MIFAB® Series R1200-JC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

61 Downloads

MIFAB® Series MC-27 water closet carrier with lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8”ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down supports.

No Rating

Product Version: Unknown

42 Downloads

MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

25 Downloads

Here is a file to have Door/Window/Gate schedule and associated door panels. the window was using door family template, the chain link fence was using curtain wall with gate.

Change Door tags:1. While placing the door, click “Tags” in the Option Bar,2. In “Loaded Tags And Symbols”, under “Doors” Category, click “Loaded Tags”, then, switch between “Door Tag-AAA”, and “Wdw Tag-AAA”.

To link parameters from a nested family to the host family you will need to do the following.1. Open the host family with the nested inserted.2. Click on the nested family.3. Click “Edit Type” in the Properties.4. The “Type Properties” window will be shown.5. Click the parameter that you want to associate with other parameter.6. Click the little button at the far right of the parameter line you want to change7. Select parameter out of list or click add parameter and recreate the parameter.When the parameter is linked there will be an (=) sign on the little button.

Make sure that the associated parameters are in the same Group, which means Text, or Dimension. If the parameter is a length, then it needs to have a value instead of 0’ 0”.

No Rating

Product Version: Revit Architecture 2015

1748 Downloads

MIFAB® Series MC-56 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs and fixture leveling hardware

No Rating

Product Version: Unknown

54 Downloads

No Rating

Product Version: Unknown

29 Downloads

MIFAB® Series F1100-C-ZS lacquered cast iron floor drain with anchor flange and 1/8” (3) recessed, 13 1/4” (337) square elastomeric flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced 6” x 6” (152 x 152) square strainer. (For non-membrane floors, use MIFAB F1100-ZS Series.)

No Rating

Product Version: Unknown

68 Downloads

MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of _____(indicate). Unit shall include: ½”(13) thick fixed primary straining baffle with 1/4” (6.4) holes and secondary ½”(13) thick removable straining baffle with 1/4” (6.4) holes, removable cross bar , securing bolt(s), stainless steel calibrated orfice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

45 Downloads

MIFAB® Series MHY-30 exposed type, self draining, moderate climate low lead wall hydrant with A.S.S.E. 1011 certified anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

193 Downloads

MIFAB® Series HY-3000-NPB exposed type, self draining, low lead, moderate climate wall hydrant with A.S.S.E. 1011 certified antisiphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

172 Downloads