 |
|
No Rating |
Product Version: Unknown
846 Downloads
|
|
 |
|
No Rating |
Product Version: Unknown
1270 Downloads
|
|
 |
Here are two Viewports:
1. Viewport Std. - with following Type Parameters:
a. Title – View Title.
b. Show Title – Yes.
c. Show Extension Line – Box checked.
2. Viewport W/ Box - with following Type Parameters:
a. Title – View Title- Detail Box.
b. Show Title – Yes.
c. Show Extension Line – Box not checked.
Place Detail Boxes: using place a drafting view as the example.
1. Load the View Title-Detail Box and Detail Box into a project.
2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.
3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.
4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types, select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet, then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.
5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using it to change to 8, then do the same for the Y, now you have the Type 8 X 10.
Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title. |
No Rating |
Product Version: Revit Architecture 2015
4446 Downloads
|
|
 |
Backless Bench - Based on the Windermere Curved Backless Bench. Windermere curved backless benches can be arranged in multiples to create a striking feature within a landscape. Combine four backless benches to form a closed circle around a focal point, pair two or three benches with a round dining table, or place end to end in an undulating line.
NOTE: External dia. 9'8" Internal dia. 6'4-1/2"
FILE TYPE: Revit 2012 64 bit |

|
Product Version: Revit Architecture 2012
32136 Downloads
|
|
 |
MIFAB® Series F1470 lacquered cast iron floor drain with anchor flange, weepholes, and adjustable collar with extra deep sump body and standard 1” (25) thick, 15 ¾” (400) square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
234 Downloads
|
|
 |
Simple line-based covered parking canopy based off of off-the shelf system. Parameters for roof material, structure material, number of columns (all will be equally spaces), and offset of columns left and right from edge of canopy.
This family has some customization, but if you have odd parking stall counts the equal column spacing may not meet your needs.
Enjoy!
Revit 2019
Keywords: Parking, Structure, Canopy, Steel, Metal, Covered, Car, Truck |

|
Product Version: Unknown
18898 Downloads
|
|
 |
MIFAB® Series F1350 lacquered cast iron floor drain with anchor flange, weepholes and adjustable collar with extra deep sump body and standard 1” (25) thick, 12” (305) round, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
63 Downloads
|
|
 |
MIFAB® Series F1450 lacquered cast iron floor drain with anchor flange, weepholes, and adjustable collar with extra deep sump body and standard 1” (25) thick, 12” (305) hinged square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
151 Downloads
|
|
 |
MIFAB® Series F1650 flushing rim floor drain with white epoxy coated interior and exterior cast iron body, 3/4” (19) N.P.T. flushing connection, anchor flange, membrane clamp, and stain finished (specify material finish) grate and frame with stainless steel allen key vandal proof screws. |
No Rating |
Product Version: Unknown
33 Downloads
|
|
 |
MIFAB® Series F1650 flushing rim floor drain with white epoxy coated interior and exterior cast iron body, 3/4” (19) N.P.T. flushing connection, anchor flange, membrane clamp, and stain finished (specify material finish) grate and frame with stainless steel allen key vandal proof screws. |
No Rating |
Product Version: Unknown
30 Downloads
|
|
 |
MIFAB® Series F1480 epoxy coated large capacity floor drain with deep sump body, and standard 1” (25) thick, 12” (305) hinged square, (specify material finish) tractor grate with free area of 51 square inches (32,903²). |
No Rating |
Product Version: Unknown
212 Downloads
|
|
 |
Assalamualaikum Warahmatullahi Wabarakatuh in Kufi.
Suitable furnishing at any entrance door especially at the Main door Entrance.
Thanks to http://www.citareka.com for the Image |

|
Product Version: Revit Architecture 2011
3679 Downloads
|
|
 |
MIFAB® Series F1160 Prison Cell floor drain with lacquered cast iron body and anchor flange, weepholes, 3” or 4” no hub side outlet, integral deep seal trap with cleanout plug and adjustable (specify material finish) strainer with T-20 torx and pin security screws. (For membrane floors, use MIFAB F1160-C Series.) |
No Rating |
Product Version: Unknown
340 Downloads
|
|
 |
MIFAB® Series F1100-AS-1 lacquered cast iron floor drain with anchor flange, weepholes, and “AS” angle satin finished nickel bronze strainer with vandal resistant stainless steel allen key screws. (For non-membrane floors, use MIFAB® F1100-AS Series.) |
No Rating |
Product Version: Unknown
276 Downloads
|
|
 |
MIFAB Series FS1750, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
331 Downloads
|
|
 |
MIFAB® Series F1550 lacquered cast iron floor drain with anchor flange, weepholes, 20” (508) diameter fixed, heavy duty membrane collar with weepholes and standard 1” (25) thick, 15” (381) round, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
74 Downloads
|
|
 |
MIFAB Series FS1760, 12” Round x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
76 Downloads
|
|
 |
MIFAB® Series F1370 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with extra deep sump body and standard 1” (25) thick, 16” (406) round, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
48 Downloads
|
|
 |
Axis C3003-E horn speaker for adding crystal-clear, two-way audio to your IP surveillance system. Mount the speaker near your Axis camera or far overhead. Set up the speaker to make scheduled announcements or to interact with guests at your entry. The camera is compatible with SIP and can be powered via PoE. An IP67- and NEMA 4X-rated casing protects the horn from outdoor weather elements. |

|
Product Version: Unknown
3082 Downloads
|
|
 |
MIFAB Series F1330C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, adjustable collar with deep sump body, and standard 1” (25) thick, 9” (235) round, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
136 Downloads
|
|
 |
MIFAB® Series F1530 lacquered cast iron floor drain with anchor flange, weepholes, 16” (406”) diameter fixed, heavy duty membrane collar with weepholes, and standard 1” (25) thick, 9” (229) round, ductile iron tractor grate. |
No Rating |
Product Version: Unknown
11 Downloads
|
|
 |
MIFAB® Series F1300-C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 1” (25) thick, 7” (178) round, (specify material finish) tractor grate. (For non-membrane floors, use F1300 Series.) |
No Rating |
Product Version: Unknown
33 Downloads
|
|
 |
MIFAB® Series F1320-C lacquered cast iron floor drain with anchor flange, cast iron membrane clamp with primary and secondary weepholes for waterproofing membrane, and standard 1” (25) thick, 9” (235) round, (specify material finish) tractor grate. (For nonmembrane floors, use F1320 Series.) |
No Rating |
Product Version: Unknown
22 Downloads
|
|
| |
This is a generic door family provided by www.Revitopia.com. It utilizes embedded families to allow concentrated design on the pieces that make up a door with minimal breaking. Its a result of door development for the designer/architects use. |

|
Product Version: Unknown
1179 Downloads
|
|
 |
OK, after 2 days of experimenting I finally got the lookup table parameters to work! The Lookup table can be exported from the table manager in the family to duplicate it and re-import it. |
No Rating |
Product Version: Revit Architecture 2014
540 Downloads
|
|
 |
MIFAB® Series F1100-C-N lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, and 7” (178) or 9” (235) (specify N7 or N9) (specify material finish) tractor grate. (For non-membrane floors, use MIFAB F1100-N Series.) |
No Rating |
Product Version: Unknown
876 Downloads
|
|
 |
MIFAB® Series F1440-Y-Q, lacquered cast iron shallow sump floor drain with anchor flange and non adjustable grate top assembly with standard 1” (25) thick, 12” square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
178 Downloads
|
|
 |
MIFAB® Series F1590 powder epoxy coated drain with offset bottom outlet, anchor flange, and extra heavy duty 24” x 24” (610 x 610) two section ductile iron grates with a free area of 200 square inches (129,032²). Grates to have maximum 13/16” (21) openings. |
No Rating |
Product Version: Unknown
141 Downloads
|
|
 |
C510 - 5 5/8” Height x 6” Width x 9.6” Length.
C610 to C640 - 6 1/8” Height x 6” Width x 9.6” to 38.5” Length.
Base - 100% recycled rubber, UV resistant.
Channel - 14 gauge galvanized steel (1 5/8” wide x 1 5/8” high).
|
No Rating |
Product Version: Unknown
30 Downloads
|
|
 |
Safety switches have a number of applications from service entrance to branch circuit protection. They are also horsepower rated for use as motor circuit switches. |

|
Product Version: Unknown
2766 Downloads
|
|