MIFAB® Series MI-G-SDH ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal steel cone, flexible drawoff hose and cap, hose clamp, line shut off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

154 Downloads

Wall based shelf ^parametric

Hidden Instance parameter displays shelf in plan as dashed lines

Shelves Instance paramter displays shlef in elevation as dashed lines even when it is behind another object as long as the invisible line passes the object in front

Shelf can be offset from wall

No Rating

Product Version: Revit Architecture 2015

5978 Downloads

anchor tie down support.

No Rating

Product Version: Unknown

55 Downloads

Allproof Industries Commercial Kitchen Line

Channel in 316 SS, 1.6mm gauge

Allproof 316 SS Ladder Grate (123 mm)

Return Edges "A"

SS Strainer Baskets available

UPLOAD TEST TO REVIT CITY / MARCH 2011

Product Version: Revit Architecture 2011

3359 Downloads

KUFI - Al-Ikhlas

-Depth Extrusion's Parametric

more at :

https://www.facebook.com/media/set/?set=a.447636519966.60334.502589966&type=3&l=1aeffd6bc8

Product Version: Revit Architecture 2011

10233 Downloads

Parametric bathroom shelves.

Parameters include: Materials, width, depth, and height. The items on the shelf can be easily deleted if not desired.

Product Version: Revit Architecture 2020

17711 Downloads

Product Version: Revit Architecture 2010

579 Downloads

Detail Item of Elevator buttons. It is 2D figured a 3D one was over kill. In the instance panel there is 2 parameters X/Y Array for the count of buttons. 

This is a really simple family but hope it helps

smh

No Rating

Product Version: Revit Architecture 2015

1255 Downloads

MIFAB®  C1300-____ (select model number): C1300-R for round scoriated, C1300-S for square scoriated access cover with frame (specify material) anchor lugs and vandal resistant stainless steel allen key screws.

No Rating

Product Version: Unknown

376 Downloads

480V to 208/120V standard150° or 115°C temperature rise available Copper windings and terminals standard CSL-3 2007 Final Rule efficiencies levels increased efficiencies help to gain LEED points

No Rating

Product Version: Unknown

520 Downloads

Door is EBE Porte QN1 available in the US at www.rest-agio.com. Visit the site for full line catalog as well as other luxury finishes from Italy.

No Rating

Product Version: Revit Architecture 2013

7926 Downloads

MIFAB C1470 Series lacquered cast iron stack cleanout with threaded bronze cleanout plug and ¼” NPT. access hex head plug.

No Rating

Product Version: Unknown

212 Downloads

MIFAB® Series MI-HUB-TRP (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield.

Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRP Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National 

No Rating

Product Version: Unknown

14 Downloads

1011 approved anti-siphon integral vacuum breaker with 3/4” male hose connection. Hydrant assembly complete with hot and cold temperature control selection, one piece neoprene plunger to control the flow, hardened bronze operating stem, heavy duty brass casing, heavy duty chrome plated bronze head casing and chrome plated face plate. Loose tee key to be furnished with each hydrant.

No Rating

Product Version: Unknown

64 Downloads

MIFAB® Series MI-HUB-TR (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.

MI-HUB-TR Series of transition couplings are tested and certi ied to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity.

No Rating

Product Version: Unknown

21 Downloads

A parametric dining table based on Pottery Barns Benchwright Extending Dining Table.

Parameters include: Materials, length, width, Wood thickness, number of chairs, and if the leaf’s are visible.

https://www.potterybarn.com/products/benchwright-extending-dining-table-rustic-mahogany/?pkey=cdining-tables&isx=0.0.411

Product Version: Revit Architecture 2020

4188 Downloads

with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

43 Downloads

This was done with the railing tool. Super clean and easy to use. Copy from the RVT file to your Project. If you get ambitious, add some piles and a no tresspassing sign.

NOTE:

You may need to adjust the material to ensure it looks correct. The chainlink is a model line drafting hatch.

Also, if you change the height, you will need to adjust the 'Chainlink Fence Panel' Profile to suit.

Good Luck - RFB

Product Version: Revit Architecture 2013

15545 Downloads

Roof steps are a simple way to creat an access route, for example, up to a chimney. They may be used on roofs of up to a 4-meter access height with a pitch of a 45 degrees.

They are installed in a straight line one over the other are finished off with anchoring device for personal fall protection, for example , a rdige rail.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

496 Downloads

MIFAB Series MI-G ____ sanitary, acid-resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:

removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101 and A.S.M.E. A112.14.3 and be so marked.

No Rating

Product Version: Unknown

447 Downloads

Entertainment Center based on an IKEA line

Product Version: Revit Architecture 2009

8330 Downloads

Hundreds of more free downloads at >>

http://revitcomponents.blogspot.com/ 

♥ ♥ ♥

Product Version: Revit Architecture 2009

31999 Downloads

pitch adaptable Half (3) 6 Panel truss for monopitch roofs

Adjust top chord to required needs and apply coping for the finishing touches.

ensure open end is located on defined pitch boundary line.

Whilst it may not be absolutely perfect for basic drawing purposes saves time by not having to create an one off truss for a project. 

No Rating

Product Version: Revit Architecture 2015

4901 Downloads

with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

39 Downloads

1011 approved anti-siphon integral vacuum breaker with 3/4” male hose connection. Hydrant assembly complete with hot and cold temperature control selection, one piece neoprene plunger to control the flow, hardened bronze operating stem, heavy duty brass casing, heavy duty chrome plated bronze head casting, chrome plated face plate and polished nickel bronze box with hinged locking cover. Loose tee key to be furnished with each hydrant.

No Rating

Product Version: Unknown

62 Downloads

MIFAB® Series MI-HUB-ARC (specify size) shielded repair couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.

The MI-HUB-ARC Series of shielded repair couplings are tested and certified to ASTM Standard C1173 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

23 Downloads

MIFAB® Series F1140C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard 1” (25) thick, 7” (178) round (specify

F1140C-7) or 9” (235) round (specify F1140C-9), (specify material finish) tractor grate and standard reinforced 5” (127) diameter (specify material finish) floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal.

No Rating

Product Version: Unknown

26 Downloads

Simple geometry wall based panel with wall mounted symbols:

Parameters for model: Height from base

Parameters for symbols: Circle and Square 45º visibility, line lenght from wall, symbol offset from wall, label, circle diameter, square lenght.

ENJOY

No Rating

Product Version: Revit Architecture 2013

786 Downloads

Simple geometry wall based panel with wall mounted symbols:

Parameters for model: Height from base

Parameters for symbols: Circle and Square 45º visibility, line lenght from wall, symbol offset from wall, label, circle diameter, square lenght.

ENJOY

No Rating

Product Version: Revit Architecture 2013

355 Downloads

MIFAB® Series MI-HUB-TRT (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.

The MI-HUB-TRT Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

18 Downloads