The VR-600 is a robot used to clean the bottom of artificial lakes. 

The VR-600 is remotely controlled and equipped with rotating brushes and a powerful pump that directly pumps out all loosened sediment – without raising turbidity in the reservoir. The VR-600 is equipped with a video camera that facilitates inspection of the inside of the reservoir. The entire cleaning process is documented and the customer receives both a videotape and a written report.

Dimensions (L x W x H): 735 x 595 x 400 mmPump capacity: 70 m3/hSpeed: Variable from 0.5 to 10 m/min depending on sediment depth.Power consumption: 2.3 kW

No Rating

Product Version: Revit Architecture 2018

1178 Downloads

SERGIO ROMA - Round Gooseneck Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

4773 Downloads

SERGIO VELO - Oval Gooseneck Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

4051 Downloads

SERGIO URBA - Square Goosemeck Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

4376 Downloads

MIFAB® Series MI-XHUB (specify size) heavy duty shielded no hub couplings are manufactured with gaskets made from neoprene that meets the requirements of ASTM C564 housed inside a Type 304 stainless steel corrugated shield. Four (2” through 4” size), six (5” through 15” size) Type 304 stainless steel clamps tightened with 3/8” Type 305 stainless steel hex head screws surround the shield to

provide the sealing force.

MI- XHUB Series Couplings are tested and certified to the ASTM-C1540 and CSA B602 Standards and are listed with IAPMO. The MI-XHUB are also tested and certified by Intertek Testing Services to the CAN/ULC S102.2 “Smoke Test”. The MI-XHUB are tested by IAPMO to comply to the FM1680 Standard (except for markings).

No Rating

Product Version: Unknown

13 Downloads

SERGIO EGO - Sink Mixer

WELS Rating: WELS 3 star rating

Supplied with: 40mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

5348 Downloads

SERGIO YOURKE - Coil Sink Mixer

WELS Rating: WELS  star rating

Supplied with: 35mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

6081 Downloads

GOLD LEAF ETAGERE WITH WHITE LACQUER SHELVES

 From World's Away

Width:32.00"Height:75.50"Depth:13.00"

No Rating

Product Version: Revit Architecture 2020

564 Downloads

SERGIO EGO SPRAY - Sink Mixer with Pull-out Spray

WELS Rating: WELS 3 star rating

Supplied with: 40mm SERGIO Ceramic Cartridge

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

4038 Downloads

Hi there

Here are two families of the same ‘crested ridge tiles’. One been build using the generic model line base template so you can drag it along the line with to control points but the tiles sometimes over lap, the second family been build using the generic model template and you control it either by the length or by the number of tiles. In both families you can control the angle of the tile and the material.

nirim      

No Rating

Product Version: Revit Architecture 2011

4550 Downloads

Line based model

Draw line from one side of road

Kerbs and pavement on both sides of the road

Two kerb colours  available

Kerb thickness and height are adjustable

Can adjust number of kerbs to get various lengths

Can change Pavement type

Pavement height  and depth are adjustable

Can adjust number of pavements to get various lengths

Can turn pavements on and off

Lane mark turns off with road less than 5500mm

Can turn edge mark off

Can adjust edge mark offset

Can adjust road mark sizes

Can adjust lane mark length with no. of lane mark

Can change all materials

Modeled in Revit 2020.

CREATIVITY IS FUN! ENJOY!!

Product Version: Revit Structure 2020

4551 Downloads

Wind turbine 6 feet in diameter, wall constraint  

Some people say that wind turbines are a sore eye, but what if you place wind turbines in commercial sculptures or contemporary pillars/monoliths, we can have them but almost hiding them.

Product Version: Revit Structure 2012

2431 Downloads

Here is a stainless steel stool,

you can edit the family to add your own materials.

Product Version: Revit Architecture 2013

2162 Downloads

Spot Elevation created as a detail component, so you can place it in drafting views AND drag the end lines. Comes with visibility checkboxes to hide the left or right side leader line. Rate it if it helps!

Product Version: Revit Architecture 2012

6007 Downloads

Here is a 3d Revit Architecture family of

a Caroma Concorde SmartFlush Toilet.

Created in Revit Architecture 2009.

High level of detail. File Size – 460kb.

Releasing more every week @ www.revitfamiliesonline.com  

Product Version: Revit Architecture 2009

9136 Downloads

Another outlet with an invisible model line at 7', so if you set your RCP cut plane to just below 7', your outlet symbols will show up.  This one is a dedicated circut symbol. 

No Rating

Product Version: Revit Architecture 2008

2849 Downloads

Tennis court with instance parameters to vary the sideline widths and baseline depth as well as line material, court material, and court boundary material.

Please Rate/Comment.  Thanks!

Product Version: Revit Architecture 2011

35240 Downloads

Premier SIPS, North America’s largest manufacturer of Structural Insulated Panels (SIPs), has been manufacturing SIPS for more than 20 years. Our testing and analysis programs have produced an extensive and comprehensive amount of proprietary data that allows us to help design professionals optimize designs with respect to both structural and energy concerns. Arming yourself with a SIPS product that is backed up with this accurate data helps you streamline the design process and make informed, dependable decisions.

Available at Autodesk: http://seek.autodesk.com/product/latest/agg/premiersipsbyinsulfoam/Premier-SIPS-by-Insulfoam/PremierSIPS

Premier SIPS by Insulfoam: Premier Structural Insulated Panels, SIPs, Structural Panels, Advanced Framing, Structural Wall Systems, Building Envelope Systems, Sandwich Panel, Pre-Fabricated Panel -

Product Version: Unknown

4914 Downloads

Line-Based Parametric Cable tray that I created.  Improve and re-post!  Hopefully it won't break!  (Can't do super small segments, unless you turn down the MAX SUPPORT SPACING param, and then you'll have more supports than you want, probably should add an if/then when segment is too short.) 

Product Version: Revit MEP 2009

8726 Downloads

Stainless Steel air baffle / inducer with Type 304 stainless steel allen key hardware.

No Rating

Product Version: Unknown

103 Downloads

This anotation is a standared Arrow. Text can be blank or changed to say anything. Top and Bottom text controled sepratly. Size / visabilty of arrow head and length of line can be controled in the instance paramiters.

Hope it helps,

smh

Product Version: Revit Architecture 2014

8625 Downloads

Door with adjustable opening percentage and hidden line to show door pocketing into opening.  Note:  You may nead to adjust your odject styles to make the Hidden Lines under Doors Black instead of Blue.

No Rating

Product Version: Revit Architecture 2012

3423 Downloads

Series LFU009 Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. The swivel feature in the series allows for it to be used in a variety of installations, including the prevention of health hazard cross-connections in piping systems or for containment at the service line entrance. This series features two in-line, independent check valves, captured springs, and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 1/2in. - 1in. (15 - 25mm) shutoffs have tee handles. It has cast copper silicon alloy body construction for durability. The LFU009 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

174 Downloads

Tactile Ground Surface Indicators size 1000 x 300 mm (20 x 6 pieces), 3-dimensional, all dimensions comply with Australian / New Zealand standards 1428.4.1 - 2009.Base is shown as line on floor plans for easy dimensioning.

Product Version: Revit Architecture 2014

4875 Downloads

 MIFAB® Series FS1720, 12” x 12” x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

115 Downloads

These Revit Schedules are a room schedule filtered for the room named Attic and a soffit schedule that includes a soffit pretending to be the ridge vent. The soffits model across the whole roof including the eaves to get the required area. The ridge vent is a narrow soffit at the ridge the length of the ridge minus the width of the boundary. I have included the stand alone schedules with no model at www.revitcity.com . The math formulas are in the schedules and can be modified per required code. The formula for the ridge vent is the perimeter of the ridge / 2. The ridge boundary is as narrow as possible so I can get a length value. Conditional values are set to black out the values if the manufacture is not who I need it to be. I think it’s pretty cool. If you have any questions feel free to email me at JustinDesigns3D@gmail.com. Enjoy :-)

No Rating

Product Version: Revit Architecture 2015

1309 Downloads

Gangnail PosiStrut Floor Truss,  Line Based - Length is set by drawing on plan.  Parametric Depth, materials and Chord Depth/Width

Product Version: Revit Architecture 2009

10317 Downloads

Wire Shelving - Line Based/Workplane Based

No Rating

Product Version: Revit Architecture 2016

1140 Downloads

Line-based countertop w/ adjustable height and adjustable splash height.

Product Version: Revit Architecture 2008

16301 Downloads

Based on: All-Purpose Mobile Teaching Easel - Elementary, by Lakeshore

Product Version: Revit Architecture 2016

2871 Downloads