SPECIFICATIONS

• coverage Pattern
  
  140 x 10
  
  


• operatingfrequency range
  
  77 Hz – 15 kHz +/- 3 dB50Hz – 18 kHz -10 dB
  
  


• continuous output
  
  127 dBSPL
  
  


• peak output
  
  133 dBSPL
  
  


• sensitivity
  
  99 dBSPL measured at 10M @ 28.3V input
  
  


• driver complement
  
  Eight - 5” Coaxial drivers
  
  


• dimensions
  
  60”H x 9”W x 9”D
  
  


• weight
  
  100 lbs.
  
  


• Rated Impedance
  
  4 ohms
  
  


• Power Rating
  
  1300 watts continuous 5200 watts peak
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/sbh/sbh-10/
  
  

No Rating

Product Version: Unknown

863 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Vice President’s Desk in Senate Chambers

This model is FACE-BASED. The Desk has parametric finishes.

Thomas@loker.com

No Rating

Product Version: Revit Architecture 2020

238 Downloads

♥ ♡ BUZZI HUB ♡ ♥

It is time for fun – relaxing– quiet – privacy…

WANT MORE >>> R E V I T C O M P O N E N T S

Product Version: Revit Architecture 2010

1351 Downloads

MIFAB® Series F1620-C lacquered cast iron floor drain with upper and lower bodies and anchor flanges, cast iron membrane clamp rings with primary and secondary weepholes for waterproofing membrane, neoprene expansion compensator, and standard 1” (25)

thick, 9” (229) round, tractor grate.

No Rating

Product Version: Unknown

34 Downloads

MIFAB® Series F1100-C-DD lacquered cast iron hub drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard (specify material finish) indirect waste hub. (For non-membrane floors, use

MIFAB F1100-DD Series.)

No Rating

Product Version: Unknown

16 Downloads

SPECIFICATIONS

• coverage Pattern
  
  90 by 60
  
  


• operatingfrequency range
  
  37 Hz - 10 kHz -3 dB27 Hz - 15 kHz -10 dB
  
  


• continuous output
  
  Band dependent, average 138 dB SPL
  
  


• peak output
  
  Band Dependent, average 145 dB SPL
  
  


• sensitivity
  
  Band Dependent , average 113 dB SPL
  
  


• driver complement
  
  Low Freq six 18" woofersMid Range twenty four 5" mids, High Freq Twelve 1" compression drivers
  
  


• weight
  
  600 Lbs
  
  


• Rated Impedance
  
  band dependent LF 3 ohms Mids 4 ohmsHigh Freq. 4 ohms
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/jericho/jh-2/
  
  

No Rating

Product Version: Unknown

322 Downloads

Body Material: Low-Lead Cast Bronze ASTM B 584

Connection: Size 3/4", 1"

Connection Type:  Threaded FNPT ANSI B1.20.1

Factory Set Pressure: 50 psi

Reduced Pressure Range:  (3/4"-1") 25 psi to 75 psi

Working Pressure:  (3/4" - 1") 300 psi

No Rating

Product Version: Revit MEP 2013

1650 Downloads

White console table 61.75" x 15.75" from IKEA Hemnes line

No Rating

Product Version: Revit Architecture 2020

1318 Downloads

A simple line based detail component to use in batter banks

No Rating

Product Version: Unknown

122 Downloads

Detail line symbol for self furring metal lath. Adjustable to any length.

No Rating

Product Version: Unknown

2190 Downloads

Hi Again

one more PARAMETRIC pattern 

more are in line

Thanks

No Rating

Product Version: Unknown

191 Downloads

Parametric modern credenza

Parameters include: materials, height, length, depth, leg position and dimensions.

No Rating

Product Version: Revit Architecture 2020

1444 Downloads

Simple Counter Line-Based Object

No Rating

Product Version: Unknown

4457 Downloads

MIFAB® Series F1420-C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 1” (25) thick, 7 3/4” x 7 3/4” (197 x 197) square, (specify material finish) tractor grate.

(For non-membrane floors, use F1420 Series.)

No Rating

Product Version: Unknown

140 Downloads

950# RH RAIL, IN-LINE OPENING, ACCORDION GATE, 14 SQFT- The Reserve Series

Product Version: Revit Architecture 2009

7172 Downloads

Generic Model line based, adjustable for pitch, must insert on workplane (not face) and move to ridge.

Product Version: Revit Architecture 2009

11004 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

U.S. Senator’s Desk in Chambers

This model is FACE-BASED. The Desk has parametric finishes. Both the top and desk drawer can be either closed or open. The family is nested with some accessory items including inkwells, pencils, yellow-pad, notebook and stacks of legislation.

Thomas@loker.com

No Rating

Product Version: Revit Architecture 2020

198 Downloads

This window has the capability to have 0 to 10 mullions in the horizontal and vertical directions. Each mullion can be placed at random distances from the bottom or left side. VD# or HD# is to specify the Vertical or Horizontal distance of the numbered mullion. To Change the mullion count change the number under the constraint section of Edit Type.

The family is a little slow when making changes but seems to work fine once loaded.

Hope this helps,

smh

Product Version: Revit Architecture 2014

3965 Downloads

Parametric modern vase.

Parameters include: height, depth, and material

Product Version: Revit Architecture 2020

2543 Downloads

MIFAB® Series F1570 - (A, B, C, D or E) powder epoxy coated heavy duty parking area catch basin with anchor flange, and extra heavy duty 24” x 24” (610 x 610) two section (specify material finish) grates with a free area of 200 square inches (129,032²). Grates to

have maximum 13/16” (21) openings.

No Rating

Product Version: Unknown

465 Downloads

Parametric curved light pendant

Parameters include: materials, length, drop, light bulb spacing, width

Product Version: Revit Architecture 2020

1568 Downloads

A metric parametric line based family for detailing a membrane / damp proofing / roofing in a section view.

Product Version: Revit Architecture 2014

2838 Downloads

 Clock designed by LEFF amsterdam, from their "tone"series clocks.

Product Version: Revit Architecture 2012

2387 Downloads

Parametric firewood stack

Parameters include: Material, Height

Product Version: Revit Architecture 2020

4658 Downloads

MIFAB® Series F1000-( * )-3 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, weepholes, and standard heavy duty, polished stainless steel strainer. (For membrane floors, add -C to Series number).

No Rating

Product Version: Unknown

73 Downloads

Tired of NPC car not showing properly in hidden line? This will help display the model in hidden view and in rendering.

No Rating

Product Version: Revit Architecture 2017

671 Downloads

SERGIO Urbane Standard & 1/2 Bowl Only

Overall Measurements: 650x450mm

LH Bowl: 400x400x200mm

RH Bowl: 170x400x140mm

Material: 304 Grade Stainless Steel

Gauge: 1.2mm

Internal Bowl Radius: 25mm

Suppliedwith: 2 x Basket Waste and Overflow Kits, Timber Preparation Board, Stainless Steel Colander

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

449 Downloads

Prive Industries Round Plaque Diffuser

Round Plaque Diffusers (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications. 

No Rating

Product Version: Revit MEP 2020

201 Downloads

He's hidden in Plan, section & Elevation, he's only really visable in 3D, theres a small line in plan to locate him. But if your after a short person or child then this is the one to go for.

Product Version: Revit Architecture 2009

11946 Downloads

Contents:

Cabinet with  doors

• Dimensions are parametric, depth, height, width, handle placement


• Materials: cabinet, door, handle

Cabinets Drawers

• up to five drawers with visibility


• dimensions are parametric; depth, height, width, drawer height


• drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.


• Materials are parametric

Plinth

• Parametric dimensions (instance) material parameter.

Worktop L shape (with/without sink)

• Lengths, depths, heights, and thickness all instance parametric

Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric

Misc parts face based

1. Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)


2. coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials


3. coffee mug: fixed dimensions, parametric materials


4. Microwave; fixed dimensions, parametric materials


5. faucet: fixed dimensions, parametric materials based upon an old Sphinx one

Misc generic model

1. Sink: parametric (instance) dimensions and height based upon floor height.

For any qeustions, 'bugs' etc. contact me by personal message

disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.

Notice: Everything under constraints is calculated and should be left alone.

standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.

Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this.

No Rating

Product Version: Revit Architecture 2016

3155 Downloads