 |
MIFAB® Series MC-13D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, left, right or both (specify) 4” (102) side inlets, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
20 Downloads
|
|
 |
Reloaded the earlier door Project after minor rectification.
One Nested Door having 2 Frames & 2 Leaves Make more than 100 Types. Multy lite varies 1Vx1H to 10Vx4H & Lites can be Glass or solid, 2ndry Frame width can be zero. Vent Ht can be zero for door without Vent. Flush door can be panel door by inputing Mould depth. Single Rebate Wooden door frame can be change to double Rebate. Door handle Type can also be change with their elevation. Hollow Metal door frame is double rebate only. Material of different parts of door can be differentOperable 2D swing represent corresponding Leaf type. 3D swing is also operable, Grill Y/N in Vent --Lallan Ji |
|
Product Version: Revit Architecture 2013
18109 Downloads
|
|
|
| |
An 7' and 8' high partially parametric Garage Door, with trim |
|
Product Version: Revit Architecture 2008
17667 Downloads
|
|
|
 |
This is a door hinge which is a face based model. When placed on the reveal of a door frame it allows another faced based model of a door panel (use the door's hinge edge as the face) to be placed on it. The family type variable opening angle can then be employed to open the door. This can also be used for opening windows.
|
|
Product Version: Revit Architecture 2014
3100 Downloads
|
|
|
 |
MIFAB® Series MC-15 single, vertical, fixed, water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
Nested door having 2 door frames & 2 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero if you do'nt need it. etc. etc. Lallan Ji |
|
Product Version: Revit Architecture 2013
14598 Downloads
|
|
|
 |
Nested door having 2 door frames & 3 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero if you do'nt need it. etc. etc. Lallan Ji |
|
Product Version: Revit Architecture 2013
22128 Downloads
|
|
|
 |
Nested door having 2 door frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero if you do'nt need it. etc. etc. Lallan Ji |
No Rating |
Product Version: Revit Architecture 2013
13109 Downloads
|
|
|
 |
door, colonial, georgian, glass window, round door knob, panels, brown, white, nohs, nohs door |
|
Product Version: Unknown
11335 Downloads
|
|
|
 |
This is a basic security storm door with no screen or number of bar control. It does not cut the wall but allows you to place it in front of an existing door. There is an option to open the door 90 or 180 degrees in plan view. |
|
Product Version: Revit Architecture 2012
13970 Downloads
|
|
|
 |
This is like a garage door except that it is not flush with the ground. You find them in service windows etc.
It is fully parametric (height, width, elevation, size of panels, materials)
REVIT 2016 |
|
Product Version: Unknown
24484 Downloads
|
|
|
| |
Modified version of the arched door, this one has 6 clear glass panes on the door and 7 on the frame |
No Rating |
Product Version: Revit Architecture 2008
1479 Downloads
|
|
|
| |
The basic Revit single panel door adjusted so door swing is 45 Degrees in plan. Less clutter. |
|
Product Version: Unknown
5679 Downloads
|
|
|
 |
Door Closer in Revit 2017 for all kinds of doors. I looked for one for decades on this site and I couldn't find one separate from the door. Now you can put a door closer to any of your custom made doors. |
|
Product Version: Revit Architecture 2017
2031 Downloads
|
|
|
 |
In this Parametric door family a part from changing the size and materials as parametric option you will even have the option to change door panels like flush door or stile door panel. This is made in revit 2016 you wont be able to open it in older versions. If you find it useful please rate it. |
|
Product Version: Unknown
11206 Downloads
|
|
|
 |
MIFAB® Series MC-10D-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
17 Downloads
|
|
|
 |
MIFAB® Series MC-10 (Specify -L for left or -R for right design) single, horizontal, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear
anchor tie down support. |
No Rating |
Product Version: Unknown
55 Downloads
|
|
|
 |
Door with jamb and adjustable door panel |
|
Product Version: Revit Building 9
24125 Downloads
|
|
|
| |
This door has a 2"x4" metal frame. The door opening it creates is 2" wider thsn the door and you can dimension to the M.O. |
No Rating |
Product Version: Revit Architecture 2010
4341 Downloads
|
|
|
| |
This family has been in the works for some time now. It has a steel door frame that embeds itself in the concrete, cuts the wall as needed and had the door panel. The door frame also adjusts itself to wall thicknesses |
|
Product Version: Revit Building 9.1
2579 Downloads
|
|
|
 |
The hollow metal frame will wrap around the wall and will automatically adjust to the wall width. The door swing angle can be adjusted in the "instance". |
|
Product Version: Revit Architecture 2011
16830 Downloads
|
|
|
 |
This is a door tag based off of NCS 3.1 where the Door number is Parallel to the door leaf. |
|
Product Version: Revit Architecture 2008
10988 Downloads
|
|
|
 |
Parametric Iron Grill Door (Burger Door) Family. Can adjust Width & Height.
If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks. |
|
Product Version: Revit Architecture 2018
11181 Downloads
|
|
|
 |
Modeled in Revit LT 2025
Includes Door Tag for Door Code, Finish, Ironmongery, and Feature (Viewpanel/Louvre) |
No Rating |
Product Version: Unknown
406 Downloads
|
|
|
| |
Solid Core Door With Glass Insterts. Modern, Funky Design. Ideal For Front Door Of A Home. |
|
Product Version: Revit Architecture 2010
3316 Downloads
|
|
|
 |
Solid Core Door With Glass Insterts. Modern, Funky Design. Ideal For Front Door Of A Home. |
|
Product Version: Revit Architecture 2010
6055 Downloads
|
|
|
 |
Here's a fancy fully parametric arched garage door with details (Also parametric).
I'm still working on making the radius of the arch parametric - I'll upload it if I ever solve all the problems. Also you can't change the number of panels in the door, but they will adjust themselves appropriately as you change the width of the door. |
|
Product Version: Revit Architecture 2012
20530 Downloads
|
|
|
 |
Fully parametric single door, modeled after steelcraft frame and window lites. Door frame can be wrapped or inset. Add kickplate, door closure, schlage lockset, and transition strip. |
No Rating |
Product Version: Revit Architecture 2016
11983 Downloads
|
|
|
 |
Fully parametric double door, modeled after steelcraft frame and window lites. Door frame can b wrapped or inset. Add kickplate, door closure, schlage lockset, and transition strip. |
|
Product Version: Revit Architecture 2016
18736 Downloads
|
|
|
 |
The parametric door contains embedded threshold along with standard ironmongery required in a bedroom door. |
|
Product Version: Revit Architecture 2014
24353 Downloads
|
|
|
Search