This is a fully parametric sliding door family for Revit. It includes adjustable parameters for width, height, Sliding, and material options. Suitable for both residential and commercial projects. Created in Revit 2024.

Product Version: Unknown

4377 Downloads

Modern Garage Door with 4 side lights. 

Product Version: Revit Architecture 2018

29613 Downloads

An 18 x 8 Carriage type Garage Door.

Product Version: Unknown

38532 Downloads

Five pane glass door with parametric dimensions and materials.

Product Version: Revit Architecture 2016

2170 Downloads

Door tag for showing egress width

Product Version: Unknown

3088 Downloads

Door Wall opening family with editable angle

No Rating

Product Version: Revit Building 9

2920 Downloads

Refridgerator - Single Door

No Rating

Product Version: Revit Building 5.1

1729 Downloads

Refridgerator - single door - over under

No Rating

Product Version: Revit Building 5.1

1533 Downloads

Refridgerator - Double Door - Over Under

No Rating

Product Version: Revit Building 5.1

6443 Downloads

Refridgerator - Single Door

No Rating

Product Version: Revit Building 5.1

2660 Downloads

Overhead Panel garage door in various sizes

Product Version: Unknown

16144 Downloads

Garage Overhead Coiling Door

No Rating

Product Version: Revit Architecture 2010

3511 Downloads

overhead sectional door

Product Version: Revit Building 5.1

15039 Downloads

Panametric Cabinet Door I've also used as a mirror over a bathroom sink.

No Rating

Product Version: Unknown

2140 Downloads

Just a simple half glass external flush door.

Product Version: Revit Architecture 2010

9910 Downloads

Standard Depth French Door Refrigerator

Product Version: Revit Architecture 2014

47930 Downloads

Simple One-Pane Sliding Door

Product Version: Revit Architecture 2008

74570 Downloads

This American Woodmark casework family is an upper wall cabinet with a top hinge door.  The door opens with an instance parameter.  There are pre-defined materials assigned with casework sub-categories.  There are six models with a URL that opens the American Woodmark catalog wherein this cabinet is found.

No Rating

Product Version: Revit Architecture 2012

8031 Downloads

Fully Parametric - Rabbet 1 & 2, Stop, Backbend 1 & 2, Backbend Fold, Face, Wall Stud, Sheathing 1 & 2.  Compatable with HM Framing Anchor for door details.

No Rating

Product Version: Revit Architecture 2008

2201 Downloads

Fully Parametric - Rabbet 1 & 2, Stop, Backbend 1 & 2, Backbend Fold, Face, Wall Stud, Sheathing 1 & 2.  Compatable with HM Framing Anchor for door details.

No Rating

Product Version: Revit Architecture 2008

1171 Downloads

Series ISCA-102-L/R Industry Standard single horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

53 Downloads

Series ISCA-122 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

39 Downloads

Series ISCA-122 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

34 Downloads

Series ISCA-122 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

29 Downloads

Here is a door I created with operable swing and materials are listen on the properties and can be changed.

No Rating

Product Version: Revit Architecture 2014

497 Downloads

Fully parametric double door with sidelight. Let me know if you have any questions.

Hope it helps,

smh

Product Version: Revit Architecture 2014

12357 Downloads

Porta Pivotante 1.50x2.50

Product Version: Revit Architecture 2012

30292 Downloads

Storefront Entry Single Door- Curtain Panel.  This is similar to the Autodesk version but with push-pull handle and additional parameters- Fully Parametric.

Product Version: Revit Architecture 2009

25584 Downloads

Generic parametric 5 panel bi-fold door.

Product Version: Revit Architecture 2009

12862 Downloads

Glass Door with Alumnium Frame 

Product Version: Unknown

12297 Downloads