Complete parametric Clopay model 525 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 525 - 2" thick sectional overhead garage door with 25 gauge deep ribbed exterior steel. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

Product Version: Revit Architecture 2011

3689 Downloads

Complete parametric Clopay model 520 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 520 - 2" thick sectional overhead garage door with 20 gauge deep ribbed exterior steel. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

3280 Downloads

Series ISCA-121 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4in.(102) no hub waste and 2in.(51) no hub vent connections, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb.(227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

38 Downloads

This steel d/door is fully parametric including mesh and threshold and L steel angle. You may change profile to suite your need.

No Rating

Product Version: Revit Architecture 2016

6006 Downloads

Fully Adjustable  Change door material in properties for metal or wood.

No Rating

Product Version: Revit Building 9

2419 Downloads

DOWNLOAD THE NEW VERSION!

THAT IS THE REAL DOOR ELEMENT!

No Rating

Product Version: Revit MEP 2010

3003 Downloads

Series ISCA-141-D Industry Standard back-to-back vertical thin wall water closet carrier with epoxy coated cast iron fitting, 4 in(102mm) no hub waste and 2 in(51mm) or 4 in(102mm) vent connection, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

49 Downloads

parametric door which we can show that opened or closed

Product Version: Revit Architecture 2019

1039 Downloads

A 9'wide, 7' high garage door based on the Clopay Classic line. Highly editable so have some fun with it!

No Rating

Product Version: Revit Architecture 2010

13187 Downloads

Updated version for DEWA Substation Door, visibility option is added to switch between opened and closed state. Revit Version 2022

No Rating

Product Version: Unknown

218 Downloads

Double action 1 1/2 door (metric), using Pacific Doors DA steel frame (NZ).  Internal use.  Parametric vision panel

No Rating

Product Version: Revit Architecture 2009

6815 Downloads

This is the header, king stud, and jack stud for a door or window family.

The top and bottom extents of the header are determined by levels like a column.

There are options to create double king studs and double jack studs if the header becomes large enough, but the formula for those visibility parameters can be removed and the visibility can instead be controlled on an instance basis.

It can be nested into a door/window family or used independently in a structural framing project.

Product Version: Revit Architecture 2018

809 Downloads

Double Door As shown in the picture with parameters like width,panel width, frame, height, sill height, gap, bottom offset,etc. It also gives four differnt material Parameter.

No Rating

Product Version: Revit Architecture 2014

6308 Downloads

Exterior door trim boards: 1x4, 1x6 and 1x8 types. Just place on exterior wall and use align tool to size around exterior garage doors and extrances.

No Rating

Product Version: Revit Architecture 2018

1564 Downloads

Residential entry door similar to one made by Masonite.  The family includes several sizes.  The glass will not have a design unless you add a relief to the glass in the material dialog box.

Product Version: Revit Architecture 2013

14882 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

Product Version: Revit Architecture 2018

467 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

236 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

222 Downloads

I created a simple half-door that can be used if you need it for whatever project you are working on.  Will show as standard swing on your floor plan. 

No Rating

Product Version: Revit Architecture 2016

910 Downloads

Basic Doorknob or Basic Handle: Drag into side view and pull out from point of insertion. Go to front veiw to place and floor plan ref level to align with door.

Product Version: Revit Building 9

1786 Downloads

One Door, multiple options.

Strip quantity can be increased within strips in the properties.

Door has adjustable architrave.

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

No Rating

Product Version: Revit Structure 2020

42 Downloads

Series ISCA-131-D Industry Standard back-to-back vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated cast iron compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

41 Downloads

Fully parametric modern barn-style door. All components are nested families. Default materials as shown in image can be changed in material parameters.

Product Version: Revit Architecture 2018

28633 Downloads

Based on Revit Double Glass Door and simonpeterong's Baldwin knobs. I should take no credit becuase all I did was put the two together.

Product Version: Unknown

3903 Downloads

This is an 8 lite patio door w/ transom and 45 degree plan symbol.  Also trim package included.

Product Version: Revit Architecture 2008

12365 Downloads

This is a double 8 lite outswing patio door w/ transom and trim.  Plans symbol is 45 deg.

Product Version: Revit Architecture 2008

26277 Downloads

Completely conceptual door made from Titanium 6AI-4V and Stainless steel AISI 446.

Product Version: Revit Architecture 2013

1907 Downloads

This revolving door family is for curtain wall panels and is fully parametric.

Product Version: Revit Architecture 2008

36571 Downloads

this family was loosely modeled after the Horton Automatic Series 110 O-SX-SX-O door. It has defined object styles and works as a curtain wall panel.

Product Version: Unknown

29897 Downloads

it have a double panel door which is  inspired from indian architecture 

it is fully parametric and adjustable at any sizes and it applies at every wall leaning at varies angle it will apply to it

No Rating

Product Version: Revit Architecture 2018

241 Downloads