 |
Int-DblPocket-15 lite-Craftsman Casing.rfa |
No Rating |
Product Version: Unknown
1840 Downloads
|
|
 |
Assalamualaikum Warahmatullahi Wabarakatuh in Kufi.
Suitable furnishing at any entrance door especially at the Main door Entrance.
Thanks to http://www.citareka.com for the Image |
|
Product Version: Revit Architecture 2011
3681 Downloads
|
|
|
 |
This American Woodmark casework family cabinet is a single door cabinet with no drawer or shelf. It is intended for vertical tray storage. The door opens with an instance parameter and is reversible. The pre-defined materials are assigned via casework sub-categories. The URL parameter opens the catalog wherein this cabinet is found. Although the width is adjustable, American Woodmark offers only the 9" unit included as the sole family type. |
|
Product Version: Revit Architecture 2012
7148 Downloads
|
|
|
 |
Watts ISCA-101-L/R-T Industry Standard single horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. |
No Rating |
Product Version: Revit MEP 2014
75 Downloads
|
|
|
| |
Single Door Refrig or Freezer, 3d |
No Rating |
Product Version: Unknown
2838 Downloads
|
|
|
 |
I updated this to allow for different thicknesses of walls. It will create a 4" interior portion of wall and you can have a 4" (or any size larger) exterior portion of the wall. It's loosely based off Weiland exterior sliding pocket doors. This newer version keeps the model objects visible and does not have symbolic/model lines for plan view. |
|
Product Version: Revit Architecture 2009
19662 Downloads
|
|
|
 |
MIFAB® Series MC-26 water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down support. |
No Rating |
Product Version: Unknown
37 Downloads
|
|
|
 |
Revit 2022
Door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
579 Downloads
|
|
|
 |
Revit 2022
Door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
619 Downloads
|
|
|
 |
Watts ISCA-101-D-T Industry Standard back-to-back horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. |
No Rating |
Product Version: Revit MEP 2014
81 Downloads
|
|
|
 |
Ext-Single-Full Glass-Craftsman Casing.rfa |
No Rating |
Product Version: Unknown
3902 Downloads
|
|
|
 |
Int-DblPocket-6 Panel-Colonial Reg Casing.rfa |
No Rating |
Product Version: Unknown
1619 Downloads
|
|
|
 |
Int-Pocket-6 Panel-Colonial Reg Casing.rfa |
|
Product Version: Unknown
6803 Downloads
|
|
|
 |
Int-Single-6 Panel-Colonial Reg Casing.rfa |
No Rating |
Product Version: Unknown
2599 Downloads
|
|
|
 |
Int-DblPocket-10 lite-Colonial Reg Casing.rfa |
|
Product Version: Unknown
1872 Downloads
|
|
|
 |
Int-DblPocket-15 lite-Colonial Reg Casing.rfa |
No Rating |
Product Version: Unknown
1556 Downloads
|
|
|
 |
Int-Bifold 2 wide-4 panel-Craftsman Casing.rfa |
|
Product Version: Unknown
16691 Downloads
|
|
|
 |
Int-Bifold 4 wide-4 panel-Craftsman Casing.rfa |
|
Product Version: Unknown
13273 Downloads
|
|
|
 |
Just a door I made while playing around on Revit. |
|
Product Version: Revit Architecture 2014
13542 Downloads
|
|
|
 |
Door Knob |
|
Product Version: Unknown
14905 Downloads
|
|
|
 |
Door Knob |
|
Product Version: Unknown
4691 Downloads
|
|
|
 |
Revit 2022
Door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
329 Downloads
|
|
|
 |
Revit 2022
door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
1363 Downloads
|
|
|
 |
Revit 2022
Door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
1210 Downloads
|
|
|
 |
This casework family depicts an American Woodmark three door, three drawer cabinet. Each door and drawer opens or pulls out individually. The doors hide an adjustable half-depth shelf. The materials are pre-defined and assigned through casework subcategories. American Woodmark offers only a single width, 45", and thus that is the only family type. You can, however, adjust the width if you are installing a custom cabinet. The URL parameter opens the catalog wherein this cabinet is found. |
|
Product Version: Revit Architecture 2012
8353 Downloads
|
|
|
 |
Many useful options available.
|
|
Product Version: Revit Architecture 2010
5622 Downloads
|
|
|
 |
Door Knob |
No Rating |
Product Version: Unknown
1642 Downloads
|
|
|
 |
Door Knob |
|
Product Version: Unknown
3265 Downloads
|
|
|
 |
upright - three door |
No Rating |
Product Version: Revit Building 5.1
7431 Downloads
|
|
|
 |
upright - two door |
|
Product Version: Revit Building 5.1
13883 Downloads
|
|
|
Search