Last one for today.

A nice Wire light pendant. I've given this one a copper finish.

This was losely based on a fitting off the internet.

2 Material parameters, Main shade and wire and ceiling rose.

Ceiling drop parameter too so you can adjust as needed.

Enjoy

Product Version: Revit MEP 2014

42397 Downloads

The Radial Slot Diffuser (RSD) produces a high induction radial swirl pattern which promotes rapid temperature equalization and is suitable for VAV applications where high turndown is present. This product can be installed in standard 24 in. x 24 in. lay-in ceiling grids or surface mounted using a plaster frame.

No Rating

Product Version: Revit MEP 2020

73 Downloads

Full parameter:

Shade size,

Shade material and glass cover

Product Version: Revit Architecture 2013

41919 Downloads

IPS Panel for Healthcare Rated 3,5,7.5 kVA

No Rating

Product Version: Revit MEP 2019

343 Downloads

My carriage style sconce is made of glass and white painted aluminum and can be mounted to entrance ways & garages.  Use the floor plan to place component and set offset to 5’6”.   I also have same style Carriage light for hanging from the ceiling.  Use floor pan to place component and set offset to 6’8”

Product Version: Revit Architecture 2013

20586 Downloads

Traditional Style mini pendant based off Murray Feiss P1065. (NOT CEILING BASED, top connection is adjustable, base is not).  Light fixture symbol with parametric label visible from reflected ceiling plan only.

Product Version: Revit Architecture 2009

10137 Downloads

Face Based external CCTV Camera with housing and bracket. Angle parameter rotates symbol as well as geometry.

Product Version: Revit MEP 2011

17147 Downloads

No Rating

Product Version: Unknown

1296 Downloads

MIFAB® Series MC-56-LP exposed arms for wall mounted lavatory with white, lacquered, adjustable, cast iron exposed support arms. Complete with fixture leveling and mounting hardware.

No Rating

Product Version: Unknown

35 Downloads

Simplified Family with Mainn Breaker Switch, Multi meter and RYB Pahse Indicators

Varuos sizes available for 6 Way to 12 Way 

Wall Mounted Family

No Rating

Product Version: Revit MEP 2019

330 Downloads

The unique Eaton design includes separation between control and power components. The ATS and Bypass isolation contactors are mounted in separate compartments with protective barriers between them which prevents the possibility of contact with the rear-mounted power connections to the contactors.

No Rating

Product Version: Unknown

1766 Downloads

Aldes CERB Exhaust & CSRB Supply standard and high pressure option. Separate grille included. Created types for most CFM ranges available up to 8" CAR.

No Rating

Product Version: Revit MEP 2017

825 Downloads

Repost the previous post for fix the missing opening cut error, tested image render by PC.

Full pareameter of Cans size, materials, on/off glass cover,...

No Rating

Product Version: Unknown

23191 Downloads

Intervational X-ray.

Hemodinamics

Raio X intervencional. Hemodinâmica.

Product Version: Revit Architecture 2014

7658 Downloads

This is just a generic lantern for mounting on a post or site wall pillar

Product Version: Revit Architecture 2009

5608 Downloads

First Upload!

A Parametric Curtain - Ceiling-Type Object

You can change the curtain width, height, its distance from the ceiling, the rod length and location. Curtain and Rod materials are parametric. It'll look funny if you make it too small or too big - it's ideal at around 5'-0" in width.

Tags: Curtain, Blind, Shade, Drape, Window Treatment

Product Version: Revit Architecture 2011

129384 Downloads

Simple Parametric Concrete Pad and Electrical Transformer

Product Version: Unknown

3907 Downloads

This is modeled after the Bobrick 818615 soap dispenser.

No Rating

Product Version: Revit Architecture 2013

10005 Downloads

Ceiling-based chandelier for a rendering project at work. I needed something to match the pendants that I had made. Ceiling drop is an Instance parameter, and Rod Radius is a Type parameter. Also, the light sources have parametric values for shade radius and height, which can be adjusted within their own family. Materials are also all parametric. 

Modeled in Revit 2017

Product Version: Unknown

5611 Downloads

Ceiling-based chandelier for a rendering project at work. I needed something to match the pendants that I had made. Ceiling drop is an Instance parameter, and Rod Radius is a Type parameter. Also, the light sources have parametric values for shade radius and height, which can be adjusted within their own family. Materials are also all parametric. 

Modeled in Revit 2017

Product Version: Unknown

2395 Downloads

Ceiling-based chandelier for a rendering project at work. I needed something to match the pendants that I had made. Ceiling drop is an Instance parameter, and Rod Radius is a Type parameter. Also, the light sources have parametric values for shade radius and height, which can be adjusted within their own family. Materials are also all parametric. 

Modeled in Revit 2017

No Rating

Product Version: Unknown

1943 Downloads

J BOX - Above Ceiling Power & Voice Data Symbol

Above Ceiling Power & Voice Data to serve quantity of workstations shown on plan. 

No Rating

Product Version: Revit Architecture 2010

1546 Downloads

Provided as a single bottle/wall mount. Bracket done so you can butt as many as you want along the wall. Also includes three differing glass colours.

Cheers

Comments would be nice thanks.

Product Version: Revit Architecture 2014

6454 Downloads

3D element in elevation. Symbol in plan (1/8" plans). I added a rotation parameter for the symbol to graphiclly point it in its intended direction. It's hosted so it should find a wall & its AFF can be adjusted.

No Rating

Product Version: Revit MEP 2010

826 Downloads

This is my actual room cabinet I made using model-in-place component. Pls feel free to use it :)

Used Revit Architecture 2019 (student version)

you could edit the family to change it's dimension

Product Version: Revit Architecture 2015

4560 Downloads

You can change the width, depth and height and elevation of the entire shelf family, as well as the space between each individual shelf. You cannot add shelves- it has to be 2 shelves on each side like in the picture. 

No Rating

Product Version: Revit Architecture 2016

21055 Downloads

Bobrick Soap Dispenser

No Rating

Product Version: Unknown

14050 Downloads

MIFAB® Series MC-28 lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste, 2” (51) no hub center vent connection and anti-crossover baffles for floor mounted back outlet water closets.

No Rating

Product Version: Unknown

33 Downloads

HJacobs excellent  shelf - metric version

This is a parametric wall mounted shelving unit for use with adjustable shelving on brackets. Its subcategory comes with a default dashed linetype so it shows up dashed in plan and elevation.

http://www.vtourinteractive.com/blog 

Product Version: Revit Architecture 2010

3929 Downloads

Porta vela e metal com vidro para parede.

No Rating

Product Version: Revit Architecture 2017

2013 Downloads