Quickly Modelled Ceiling Pendant for a small domestic job.

Ceiling drop is changable and also materials for Shade, Shade trim, Ceiling rose and wire connection.

Enjoy

Product Version: Revit MEP 2014

19192 Downloads

Ceiling mounted square return air vent

Product Version: Revit Architecture 2008

17756 Downloads

First one of the day....

Yet another Ceiling pendant. this time a contrast of wood and ceramic shade. All materials are changable along with the ceiling drop height.

Face based family.

Enjoy

Product Version: Revit MEP 2014

17060 Downloads

This is a designed lamp which can be placed anywhere in the ceiling in the ceiling plan can change materials also

No Rating

Product Version: Revit Architecture 2014

4102 Downloads

CERAMICIRCUIT™ HEATERS – LAY-IN

High Efficiency Ceramic Infrared Panels

The CeramiCircuit™ Lay-In Ceiling Heater is ideal for institutional and commercial application where acoustical tile ceilings exist. Install a few units to address a cold spot, or use them as the primary heat source in an office.

Radiant Electric Heat

Product Website: http://electricheat.com/products/ceiling-heater-lay-in/

Product Cutsheet: http://electricheat.com/wp-content/uploads/2015/09/1624CL-Cut-Sheet-9.2015.pdf

3-Part Specification: http://electricheat.com/wp-content/uploads/2015/09/238330-REH3-part-Specification-9.30.2015.pdf

Submittal Sheet: http://electricheat.com/wp-content/uploads/2015/09/Ceiling-Submittal-Sheet-9.2015.pdf

Operation Manual Installation Instructions: http://electricheat.com//wp-content/uploads/2013/12/1624CL-Drop-In-OM-WEB1.pdf

No Rating

Product Version: Revit Architecture 2012

627 Downloads

Last one for the day.

Chrome Ceiling Pendant. Again with all the others, Ceiling drop & materials are all changable.

Face based family

enjoy

Product Version: Revit MEP 2014

12616 Downloads

Ceiling Art that is ceiling based.

Product Version: Revit Architecture 2009

3313 Downloads

Based on the Rejuvenation Fixture Jefferson, this is a ceiling based light fixture in the style of a traditional schoolhouse light.  I have heard that it might be better to not be ceiling hosted so that if the ceiling changes, the fixture will remain.....

I have not adjusted the photometrics so don't rely on those.

No Rating

Product Version: Revit Architecture 2009

23181 Downloads

A ceiling hosted attic/ceiling access panel. Has two sizes predefined

Product Version: Unknown

15038 Downloads

Parametric controls give one more flexibility for ceiling or floor mounted units

Product Version: Revit Building 9.1

2284 Downloads

A generic ceiling based model of a ceiling router, about 8" diameter. 

No Rating

Product Version: Revit Architecture 2016

2319 Downloads

Detail Ceiling yang tidak memerlukan 3D

Product Version: Unknown

5119 Downloads

This is a ceiling Access hatch/panel. you can change the dimensions and the materials of everything. It is ceiling based. 

Product Version: Unknown

21998 Downloads

Slope of ceiling is 9.09 degrees

No Rating

Product Version: Revit Architecture 2010

1890 Downloads

This is a pretty simple (but too complicated to do within Revit) model fill pattern I made to use to show a walk-on IMP ceiling in a reflected ceiling plan. The panel size is 3'-6" by 10'-6"

No Rating

Product Version: Unknown

1392 Downloads

Afternoon ladies and gents......

Its been a few days since my last upload but i thought whats the heck, i'll treat you all.

Here we have a nice modern light chandelier. As with all my families i've added material parameters for the bulb, main material and glass shade.

I've also added a ceiling drop dimension parameter which is an instant parameter so you can have the same family in one model but at different heights.

THIS IS A FACE BASED FAMILY, SO TO LOAD ONTO A CEILING, OPEN UP THE CEILING LAYOUT AND LOAD ON FACE.

alot of people keep saying it only loads onto wall, no it doesnt.

Product Version: Revit MEP 2014

20442 Downloads

Simple Round Light, Ceiling Based Model.

Inside the Family is a Studio Light that as an instance can be turned on or off of additional light.  The studio light can also be shifted up or down (Distance from the Ceiling) depending on what you are illuminating.

Enjoy

No Rating

Product Version: Unknown

3695 Downloads

Simple Round Light, Ceiling Based Model.

Inside the Family is a Studio Light that as an instance can be turned on or off of additional light.  The studio light can also be shifted up or down (Distance from the Ceiling) depending on what you are illuminating.

Enjoy

Product Version: Unknown

15203 Downloads

Generic face-based model of the Minka Aire brand Pancake 52" ceiling fan.  Model number F738-WHF

The family has a parameter to control fan material.  Also a parameter to control offset from ceiling (hanging depth).

The fan is face based, and not ceiling based, as we often model our floors to have our finish ceiling layers, and wanted to be able to attach our fan to the bottom of the floor above if/as needed.

Enjoy!

Product Version: Revit Architecture 2020

8734 Downloads

has front and side view, can show intermittent furring channels and also has acoustic ceiling type

Product Version: Unknown

3936 Downloads

It is a ceiling based 600mm dia round hanging light (around 300mm hanging from the ceiling). Materials can be edited.

No Rating

Product Version: Revit Architecture 2018

9160 Downloads

It is a ceiling based 600mm dia round hanging light (around 300mm hanging from the ceiling). Materials can be edited.

No Rating

Product Version: Revit Architecture 2018

3861 Downloads

*****REVIT 2021 DOWNLOAD*****

Parametric Ceiling Fan family with lighting included

Material and Light Source distance from ceiling parameters included.

***Make sure to change light diffusor material to a self illuminated glass so light source will show***

Product Version: Revit Architecture 2020

12464 Downloads

54" Ceiling Fan - Based on the Hunter Mission style fan.  All materials are listed under Ceiling Fan 4 for easy location and changing of materals.  All blades are set to their own layer for easy changing of wood grain direction to fit your needs.

FILE TYPE: Revit 2012 64 Bit

Product Version: Revit Architecture 2012

26732 Downloads

Basic Ceiling Tag, just the "Height Offset From Level" and A.F.F.  text

No Rating

Product Version: Unknown

1377 Downloads

Blue Metal, Baffle Ceiling System, Technical Suport

Web: wingyipengineering.com

Email: wingyip@wingyipeng.com

Tel: 31241222

Product Version: Revit MEP 2019

2162 Downloads

Blue Metal, Baffle Ceiling System, Technical Suport

Web: wingyipengineering.com

Email: wingyip@wingyipeng.com

Tel: 31241222

No Rating

Product Version: Revit MEP 2019

968 Downloads

Ceiling lighting component for kitchens, offices, rooms, etc. Material can be modified as well as light intensity. Enjoy.

Product Version: Revit Architecture 2010

28514 Downloads

52" ceiling Fan with Sweeping fins. Material fully Modifiable. Let me know what you think. Haven't rendered this one yet eather.

No Rating

Product Version: Unknown

31118 Downloads

False Ceiling Quotation/ Design/ Installation/ Technical Support;

Web: wingyipengineering.com

Email: Wingyip@wingyipeng.com

Tel: 3124 1222  W. S. Chan ( Tony )

No Rating

Product Version: Revit Architecture 2019

2398 Downloads