Manufacturer: Santa & Cole

Designer: Hector Roqueta /Ferran Sesplugues

2005

Support made of a curved stainless steel AISI 304* tube with a polished finish. The tube has a diameter of 33 mm and plates at either end for subjection to the ground.Incorporates a clip to join both supports made of black polyamide and stainless steel AISI 304*, with a polished finish.As it is modular, this element can be combined in multiple ways.The bike rack is delivered unassembled and assembly instructions are included.It is fixed to the ground by two screws per stainless steel plate.Maintenance is not required.Weight, standard module 16 Kg.

Product Version: Revit Architecture 2013

5774 Downloads

Generic window to appear as functional as Curtainwall.

Based on Kawneen 451T

Storefront with Receiver

Adjust depth of wall placement similar to curtainwall with numeric imput. Works in brick, stucco, etc (Varying wall thickness)

Can change spandrel panel thickness and glazing type color with material palette. Use check bock to change panel from vision to spandrel in plan for thickness, but must use material to change actual material

Built in shim distance can be adjust to control rough opening shown on elevations and plan. 

Receiver distance value is meant to be mullion plus additional receiver thickness, not total receiver thickess.

No Rating

Product Version: Revit Architecture 2012

1580 Downloads

Generic window to appear as functional as Curtainwall.

Based on Kawneen 451T

Storefront with Receiver

Adjust depth of wall placement similar to curtainwall with numeric imput. Works in brick, stucco, etc (Varying wall thickness)

Can change spandrel panel thickness and glazing type color with material palette. Use check bock to change panel from vision to spandrel in plan for thickness, but must use material to change actual material

built in shim distance can be adjust to control rough opening shown on elevations and plan. 

receiver distance value is meant to be mullion plus additional receiver thickness, not total receiver thickess.

No Rating

Product Version: Unknown

1567 Downloads

Hey guys, I noticed that someone posted a Parametric Slab Family in here, but nobody could've download it. Apparently it was a fake.

A while ago I managed to get a real Parametric Slab Family (with joists and bricks), but I don't remember from where or who is the author, but I decided to post it here, so other people could use it too.

PS: I DIDN'T DEVELOPED THIS FAMILY, SO, IF THE AUTHOR SHOWS UP AND ASK ME TO REMOVE IT, I WILL REMOVE IT.

How to use: Load the family "Laje_de_Forro_Parametric_Slab_17204.rfa" in the project and create a Beam System. Change the Beam Type to "Vigota Treliçada..." and you will see the joists. Use Fixed Distance of 0,43 m. Then select one or all the joists (not the beam system) and you will see the option "Visibilidade da Lajota" in the bottom of the Properties Panel. Check it to enable the brick. That is it.

---------------------------------------------------- 

Olá pessoal, eu percebi que alguém postou uma Família Paramétrica de Laje de Forro aqui, mas ninguém conseguia baixar ela. Aparentemente era uma montagem.

A alguem tempo atrás eu consegui uma Família de Laje de Forro real (com vigotas e lajotas), mas não consigo me lembrar onde e quem era o autor, mas decidi postar aqui, para que outras pessoas pudessem usá-la também.

OBS: EU NÃO DESENVOLVI ESSA FAMÍLIA, ENTÃO, SE O AUTOR APARECER E PEDIR PRA REMOVER, EU VOU REMOVER.

Como usar: Carregue a família "Laje_de_Forro_Parametric_Slab_17204.rfa" no projeto e crie um Sistema de Vigas. Mude o Tipo de Viga (Beam Type) para "Vigota Treliçada..." e você verá as vigotas. Use Distância Fixada de 0,43m. Depois selecione um ou todas as vigotas (não o sistema de vigas) que você verá a opção "Visibilidade da Lajota" no fundo do Painel de Propriedades. Marque essa opção para habilitar as vigotas. Pronto, é isso.

Product Version: Unknown

3811 Downloads

Our Calm range is available fully upholstered, upholstered seat only or simply as a ply wood seat, finished in various colours. It's made from a one piece shell for ease of cleaning and is stackable to save space. It's available as a single seat and as a modular beam seating unit.

Pay us a visit at Knightsbridge Furniture

(Created in Revit 2014)

Product Version: Unknown

10144 Downloads

Our Polo range is available fully upholstered, upholstered seat only or simply as a ply wood seat, finished in various colours. It's made from a one piece shell for ease of cleaning and is stackable to save space. It's available as a single seat and as a modular beam seating unit.

Pay us a visit at Knightsbribge Furniture

(Created in Revit 2014)

Product Version: Unknown

5094 Downloads