|
|
Search Downloads
Search Results
 |
MIFAB® Series F1580 powder epoxy coated deep sump drain with secondary dome strainer, bottom outlet and extra heavy duty 24” x 24” (610 x 610) two section ductile iron grates with a free area of 200 square inches (129,032²). Grates to have maximum 13/16” (21) openings. |
No Rating |
Product Version: Unknown
250 Downloads
|
|
 |
Arrayed Parametric TJI section. 2D Line based Detail Component. This family will keep the TJI at the set interval with the last one filling the reminder. (Preset interval is 16") The last TJI has a visibility toggle in the type properties.
Sizes preprogramed 110, 210, 230, 360, and 560
Hope it helps,
smh |
No Rating |
Product Version: Revit Architecture 2014
572 Downloads
|
|
|
 |
MIFAB® LIL-SA Series HDPE injection molded sand interceptor. Unit shall include: two internal sand separation baffles with 3″ diameter holes, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. |
No Rating |
Product Version: Unknown
65 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families! + R E V I T COMPONENTS BLOG, keep updated... PLEASE TELL YOUR FRIENDS!! |
|
Product Version: Unknown
16381 Downloads
|
|
|
![Colorbond fence [parametric]](object_docs/9122_s.jpg) |
Here we go, a great parametric colorbond fence which adapts to the site slopes. Just follow the instructions to use it: First of all, it only works as linear arrays, never curves. 1) Insert the component making sure its host is the site surface. 2) Measure the total distance of the line you want the fence on and subtract 60mm, which is the post diameter. 3) Divide the total by the panel length, for example 2100mm. Example: if we have 22578mm to fence, subtract 60mm and divide by 2100mm. That gives me 10.72 4) Round this number to the next integer. In this case 10.72 becomes 11. 5) Divide the total (22518mm) by 11. 6) Open the Fence Properties and change its length to the result (2047.09). 7) Create an array of 11 parts with the panel. 8) That's it. Done! |
|
Product Version: Revit Architecture 2010
21542 Downloads
|
|
|
 |
MIFAB® Series LIL-FUR HDPE injection molded fur interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
34 Downloads
|
|
|
 |
MIFAB® Series LIL-R HDPE injection molded rice interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
31 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
No Rating |
Product Version: Unknown
2294 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! *PLEASE SHARE OUR EFFORTS WITH YOUR FRIENDS* |
|
Product Version: Unknown
2243 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
|
Product Version: Revit Architecture 2009
3679 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
|
Product Version: Unknown
3508 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! *PLEASE SHARE OUR EFFORTS WITH YOUR FRIENDS* |
|
Product Version: Unknown
1129 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! *PLEASE SHARE OUR EFFORTS WITH YOUR FRIENDS* |
|
Product Version: Revit Architecture 2009
5077 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated. |
|
Product Version: Unknown
1532 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated. |
|
Product Version: Unknown
2065 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated. |
|
Product Version: Unknown
2264 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
|
Product Version: Unknown
3051 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated. |
|
Product Version: Unknown
6414 Downloads
|
|
|
 |
Series LFN45B-L Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Available with double union threaded or solder end connections. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa). |
No Rating |
Product Version: Revit MEP 2014
489 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
No Rating |
Product Version: Revit Architecture 2020
156 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
No Rating |
Product Version: Revit Architecture 2020
99 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
No Rating |
Product Version: Revit Architecture 2020
94 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
|
Product Version: Revit Architecture 2020
98 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
No Rating |
Product Version: Revit Architecture 2020
117 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
No Rating |
Product Version: Revit Architecture 2020
60 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated. |
|
Product Version: Revit Architecture 2008
4880 Downloads
|
|
|
 |
R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families + R E V I T COMPONENTS BLOG, keep updated! |
|
Product Version: Revit Architecture 2008
3368 Downloads
|
|
|
 |
You can also only use the unit without the fence and the base. I made 'Yes/No' parameters to turn does on and off.
The opject is made out of rough dimentions! |
No Rating |
Product Version: Revit Architecture 2017
559 Downloads
|
|
|
 |
MIFAB® LIL-S Series HDPE injection molded solids interceptor. Unit shall include: internal perforated sediment bucket (1/4″ diameter holes) with coarse screen, baffle assembly (3/8″ x 1 1/4″ slots) and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
44 Downloads
|
|
|
 |
A Bike Storage Solution for High Density Areas
College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space. |
No Rating |
Product Version: Revit Architecture 2020
302 Downloads
|
|
|
|
Site Stats
Members: | 2161655 | Objects: | 23325 | Forum Posts: | 152479 | Job Listings: | 3 |
|
Search