WATSON DESKING - SEVEN - No more need for traditional rectangles... 

(http://www.watsondesking.com)

This lil' Family is very parametric and includes 9 Types _ Enjoy! 

 Hundreds of more free downloads at http://revitcomponents.blogspot.com/

♥ ♥ ♥

Product Version: Revit Architecture 2009

1050 Downloads

MIFAB® Series F1490 epoxy coated large capacity floor drain with deep sump body, and standard 1” (25) thick, 15 ¾" (400) square, (specify material finish) tractor grate with free area of 75 square inches.

Product Version: Unknown

1033 Downloads

MIFAB® Series F1340-Y-Q, lacquered cast iron shallow sump floor drain with anchor flange and non adjustable grate top assembly with standard 1” (25) thick, 12” round, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

171 Downloads

Fully parametric Card Reader based On HID model. With 6 card reader options available varies in width, length and height. Included card reader with keypads, card swipe as an options. Hope you like. It’s my fist ever family created in Revit!! New User so feedbacks will be helpful. Thanks

Product Version: Revit Architecture 2018

2234 Downloads

PARAMETRIC COMPONENTS, the #1 source for high-quality, parametric Revit® Families

BUZZI HUB _ SIDE

http://www.buzzispace.com/products/buzzihub

Product Version: Unknown

1578 Downloads

MIFAB® Series MI-QXHUB (specify size) heavy duty shielded no hub couplings are manufactured with gaskets made from neoprene and three sealing rings (meets the requirements of ASTM C564) housed inside a Type 304 stainless steel corrugated shield. Four (2” through 4” size), six (5” through 12” size) Type 304 stainless steel clamps tightened with 3/8” Type 305 stainless steel hex head screws surround the shield to provide the sealing force.

MI-QXHUB Series Couplings are tested and certified to the ASTM-C1540 and CSA B602 Standards. The MI-QXHUB are also tested and certified by Intertek Testing Services to the CAN/ULC S102.2 “Smoke Test”. The MI-QXHUB are tested and certified by IAPMO to comply to the FM1680 Standard (except for markings). Patented Pipe Clamp for joining all types of pipe.

No Rating

Product Version: Unknown

37 Downloads

Modeled the University of Utah Football Field for a class project. Though I would share it in case anyone ever needs it. Not parametric, it is the exact size of the field currently sitting in the stadium. Materials are also listed under the properties tab in the edit type section for an easy change to any material or color that you would like. Enjoy!

Product Version: Unknown

3044 Downloads

I have taken a manufacturers family - redrew it - so every curve is tangentle to other planes - hence with lines on - no lines between formed surfaces. This is how drawing should be. When 3D view set at Scale 1:1 - therefore no thick line work. In this instance no linework turned on anyways.

Manufactured items in sheetmetal, plastics, timber etc, it is vare rare to have a sharp corner on it. All planes should have a radiused chamfer - just look around your office - hard to find two surfaces coming together with sharp edge. 

Have posted this here solely to assist others on how to draw and also how to display.

To many rubbish families posted here - learn and create each one better than the last one.

Any comments - feel free - 

Product Version: Revit Architecture 2014

9682 Downloads

MIFAB® Series F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 15 ¾” (400) square, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

368 Downloads

MIFAB® Series F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 15 ¾” (400) square, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

126 Downloads

SIOUX CHIEF MANUFACTURING

Finish Line Halo Drain™ Adjustable Floor Drain with Deck Flange (Round Strainer)

siouxchief.com

Product Version: Revit Architecture 2010

2527 Downloads

No Rating

Product Version: Unknown

634 Downloads

No Rating

Product Version: Unknown

520 Downloads

No Rating

Product Version: Unknown

846 Downloads

No Rating

Product Version: Unknown

1270 Downloads

Here are two Viewports:

1. Viewport Std. - with following Type Parameters:

a. Title – View Title.

b. Show Title – Yes.

c. Show Extension Line – Box checked.

2. Viewport W/ Box - with following Type Parameters:

a. Title – View Title- Detail Box.

b. Show Title – Yes.

c. Show Extension Line – Box not checked.

Place Detail Boxes: using place a drafting view as the example.

1. Load the View Title-Detail Box and Detail Box into a project.

2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.

3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.

4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types,    select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet,    then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.

5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using    it to change to 8, then do the same for the Y, now you have the Type 8 X 10.

 Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title.

No Rating

Product Version: Revit Architecture 2015

4446 Downloads

Backless Bench - Based on the Windermere Curved Backless Bench. Windermere curved backless benches can be arranged in multiples to create a striking feature within a landscape. Combine four backless benches to form a closed circle around a focal point, pair two or three benches with a round dining table, or place end to end in an undulating line.

NOTE: External dia. 9'8" Internal dia. 6'4-1/2"

FILE TYPE: Revit 2012 64 bit

Product Version: Revit Architecture 2012

32134 Downloads

MIFAB® Series F1470 lacquered cast iron floor drain with anchor flange, weepholes, and adjustable collar with extra deep sump body and standard 1” (25) thick, 15 ¾” (400) square, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

234 Downloads

Simple line-based covered parking canopy based off of off-the shelf system.  Parameters for roof material, structure material, number of columns (all will be equally spaces), and offset of columns left and right from edge of canopy.

This family has some customization, but if you have odd parking stall counts the equal column spacing may not meet your needs.  

Enjoy!

Revit 2019

Keywords: Parking, Structure, Canopy, Steel, Metal, Covered, Car, Truck

Product Version: Unknown

18893 Downloads

MIFAB® Series F1350 lacquered cast iron floor drain with anchor flange, weepholes and adjustable collar with extra deep sump body and standard 1” (25) thick, 12” (305) round, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

63 Downloads

MIFAB® Series F1450 lacquered cast iron floor drain with anchor flange, weepholes, and adjustable collar with extra deep sump body and standard 1” (25) thick, 12” (305) hinged square, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

151 Downloads

MIFAB® Series F1650 flushing rim floor drain with white epoxy coated interior and exterior cast iron body, 3/4” (19) N.P.T. flushing connection, anchor flange, membrane clamp, and stain finished (specify material finish) grate and frame with stainless steel allen key vandal proof screws.

No Rating

Product Version: Unknown

33 Downloads

MIFAB® Series F1650 flushing rim floor drain with white epoxy coated interior and exterior cast iron body, 3/4” (19) N.P.T. flushing connection, anchor flange, membrane clamp, and stain finished (specify material finish) grate and frame with stainless steel allen key vandal proof screws.

No Rating

Product Version: Unknown

30 Downloads

MIFAB® Series F1480 epoxy coated large capacity floor drain with deep sump body, and standard 1” (25) thick, 12” (305) hinged square, (specify material finish) tractor grate with free area of 51 square inches (32,903²).

No Rating

Product Version: Unknown

212 Downloads

Assalamualaikum Warahmatullahi Wabarakatuh in Kufi.

Suitable furnishing at any entrance door especially at the Main door Entrance.

Thanks to http://www.citareka.com for the Image

Product Version: Revit Architecture 2011

3679 Downloads

MIFAB® Series F1160 Prison Cell floor drain with lacquered cast iron body and anchor flange, weepholes, 3” or 4” no hub side outlet, integral deep seal trap with cleanout plug and adjustable (specify material finish) strainer with T-20 torx and pin security screws. (For membrane floors, use MIFAB F1160-C Series.)

No Rating

Product Version: Unknown

340 Downloads

MIFAB® Series F1100-AS-1 lacquered cast iron floor drain with anchor flange, weepholes, and “AS” angle satin finished nickel bronze strainer with vandal resistant stainless steel allen key screws. (For non-membrane floors, use MIFAB® F1100-AS Series.)

No Rating

Product Version: Unknown

276 Downloads

MIFAB Series FS1750, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

331 Downloads

MIFAB® Series F1550 lacquered cast iron floor drain with anchor flange, weepholes, 20” (508) diameter fixed, heavy duty membrane collar with weepholes and standard 1” (25) thick, 15” (381) round, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

74 Downloads

Download: http://bimobject.com/en/kinnarps/product/942axbase4wofa 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

HILL Chair

UNIQUE CHAIR FAMILY

Embrace is an appealing and unique chair family. Designed to suit many different types of environments and in numerous different contexts. Everywhere. And anywhere in between. To be used for all types of meetings. In larger or smaller groups. When you need to work a while. Or for a spontaneous conversation. To wait or take a break. Whatever you want and more. Both flexible and functional. An entire family of chairs has been designed from a basic concept and design idea. A total concept. With the same gentle lines and recognition. With changing expressions and characteristics depending on choice of finish and materials. Embrace is a new type of versatile chair that suits today’s working life. That provides new thoughts and ideas. With creativity and a balanced design. Design: Stefan Brodbeck (Brodbeck Design)

No Rating

Product Version: Unknown

2975 Downloads