 |
This was done with the railing tool. Super clean and easy to use. Copy from the RVT file to your Project. If you get ambitious, add some piles and a no tresspassing sign.
NOTE:
You may need to adjust the material to ensure it looks correct. The chainlink is a model line drafting hatch.
Also, if you change the height, you will need to adjust the 'Chainlink Fence Panel' Profile to suit.
Good Luck - RFB |
|
Product Version: Revit Architecture 2013
15545 Downloads
|
|
 |
Roof steps are a simple way to creat an access route, for example, up to a chimney. They may be used on roofs of up to a 4-meter access height with a pitch of a 45 degrees.
They are installed in a straight line one over the other are finished off with anchoring device for personal fall protection, for example , a rdige rail.
Made in Sweden by CW Lundberg AB |
No Rating |
Product Version: Revit Architecture 2018
496 Downloads
|
|
|
 |
MIFAB Series MI-G ____ sanitary, acid-resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:
removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101 and A.S.M.E. A112.14.3 and be so marked. |
No Rating |
Product Version: Unknown
446 Downloads
|
|
|
 |
Entertainment Center based on an IKEA line |
|
Product Version: Revit Architecture 2009
8330 Downloads
|
|
|
 |
Hundreds of more free downloads at >> http://revitcomponents.blogspot.com/ ♥ ♥ ♥
|
|
Product Version: Revit Architecture 2009
31999 Downloads
|
|
|
 |
pitch adaptable Half (3) 6 Panel truss for monopitch roofs
Adjust top chord to required needs and apply coping for the finishing touches.
ensure open end is located on defined pitch boundary line.
Whilst it may not be absolutely perfect for basic drawing purposes saves time by not having to create an one off truss for a project.
|
No Rating |
Product Version: Revit Architecture 2015
4900 Downloads
|
|
|
 |
MIFAB® Series MHY-16 _____ (specify length) A.S.S.E. 1019-B certified exposed type, self draining, low lead, non freeze wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete
with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant. |
No Rating |
Product Version: Unknown
39 Downloads
|
|
|
 |
MIFAB® Series MHY-45 ____ A.S.S.E. 1019-B approved encased type, self draining, non freeze hot and cold wall hydrant with A.S.S.E.
1011 approved anti-siphon integral vacuum breaker with 3/4” male hose connection. Hydrant assembly complete with hot and cold temperature control selection, one piece neoprene plunger to control the flow, hardened bronze operating stem, heavy duty brass casing, heavy duty chrome plated bronze head casting, chrome plated face plate and polished nickel bronze box with hinged locking cover. Loose tee key to be furnished with each hydrant. |
No Rating |
Product Version: Unknown
62 Downloads
|
|
|
 |
MIFAB® Series MI-HUB-ARC (specify size) shielded repair couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.
The MI-HUB-ARC Series of shielded repair couplings are tested and certified to ASTM Standard C1173 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
23 Downloads
|
|
|
 |
MIFAB® Series F1140C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard 1” (25) thick, 7” (178) round (specify
F1140C-7) or 9” (235) round (specify F1140C-9), (specify material finish) tractor grate and standard reinforced 5” (127) diameter (specify material finish) floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal. |
No Rating |
Product Version: Unknown
26 Downloads
|
|
|
 |
Simple geometry wall based panel with wall mounted symbols:
Parameters for model: Height from base
Parameters for symbols: Circle and Square 45º visibility, line lenght from wall, symbol offset from wall, label, circle diameter, square lenght.
ENJOY
|
No Rating |
Product Version: Revit Architecture 2013
786 Downloads
|
|
|
 |
Simple geometry wall based panel with wall mounted symbols:
Parameters for model: Height from base
Parameters for symbols: Circle and Square 45º visibility, line lenght from wall, symbol offset from wall, label, circle diameter, square lenght.
ENJOY
|
No Rating |
Product Version: Revit Architecture 2013
355 Downloads
|
|
|
 |
MIFAB® Series MI-HUB-TRT (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.
The MI-HUB-TRT Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
18 Downloads
|
|
|
 |
MIFAB® Series MI-HUB-TRC (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.
The MI-HUB-TRC Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
17 Downloads
|
|
|
 |
MIFAB® Series MHY-10 ____ (specify length) A.S.S.E. 1019-B certified exposed type, self draining, non freeze low lead, wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete
with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.
|
No Rating |
Product Version: Unknown
24 Downloads
|
|
|
 |
MIFAB Series MI-G-SD ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:
removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal grease retention tray adjacent to grease draw-off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
197 Downloads
|
|
|
 |
SFRM can be placed on any beam, column, or brace. All parameters are instance, including SFRM thickness. Fireproofing is placed adaptively.Easiest placement is in 3d view, medium detail, hidden line, place on face. Adaptive points need to be placed counterclockwise, as shown in the image. SFRM can be placed from above or below the beam/either face of column or brace.Revit version 2016. |
No Rating |
Product Version: Revit Architecture 2015
1258 Downloads
|
|
|
 |
BVN AIR
AC CENTRIFUGAL IN LINE DUCT FAN
PLASTİC HOUSİNG
PLASTİK KANAL TİPİ FAN |
No Rating |
Product Version: Revit Architecture 2016
522 Downloads
|
|
|
 |
MIFAB® Series MI-HUB-ARC-CL (specify size) shielded repair couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield.
Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-ARC-CL Series of shielded repair couplings are tested and certified to ASTM Standard 1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
26 Downloads
|
|
|
 |
MIFAB® Series MI-HUB-TRCC (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.
The MI-HUB-TRCC Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
MIFAB® Series F1240 lacquered ductile iron area drain with ½” (13) thick, 6 ½” (165) diameter heavy duty ductile iron grate with stainless steel screws. Recommended for use in vehicular traffic areas. |
No Rating |
Product Version: Unknown
904 Downloads
|
|
|
 |
- Football 7 field full parametric
- Equiped with football goals & corner flags
- Parameters: field size, band size, all materials, estrusion line height.
|
|
Product Version: Revit Architecture 2017
17039 Downloads
|
|
|
 |
Modelled similar to metal Hydestore longrun shelving unit, this floor hosted generic model family is parametric in height, depth & width. Materials are type parameters, height is an instance parameter. 3D model not shown in Plan views or Coarse & Medium. Shown as a grey dashed line on Floor Plans. |
|
Product Version: Revit Architecture 2010
16576 Downloads
|
|
|
 |
Geothermal-Water Furnace
http://www.waterfurnace.com/products.aspx?prd=Synergy3D |
|
Product Version: Revit Architecture 2012
7106 Downloads
|
|
|
 |
MIFAB® Series MHY-25 _____ (specify length) A.S.S.E. 1019-B certified exposed type, self draining, non freeze low lead wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete
with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting, polished chrome plated face plate, and satin finished nickel bronze box with hinged locking cover. Operating key to be furnished with each hydrant. |
No Rating |
Product Version: Unknown
29 Downloads
|
|
|
 |
MIFAB® Series MHY-26 _____ (specify length) A.S.S.E. 1019-B certified exposed type, self draining, non freeze low lead wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete
with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting, polished chrome plated face plate, and satin finished nickel bronze box with hinged locking cover. Operating key to be furnished with each hydrant. |
No Rating |
Product Version: Unknown
39 Downloads
|
|
|
 |
A parametric topography hosted boundary height recession plane and height marker. Snaps to the topography and tabs to be perpendicular to the property line. Options for height and angle, vertical only or height marker only. A bulk and location planning tool http://www.vtourinteractive.com/blog |
No Rating |
Product Version: Revit Architecture 2009
1778 Downloads
|
|
|
 |
MIFAB® C1300-____ (select model number: C1300-UR for round terrazzo, C1300-US for square terrazzo) nickel bronze recessed access cover with nickel bronze frame, anchor lugs, and vandal resistant stainless steel screw(s). |
No Rating |
Product Version: Unknown
159 Downloads
|
|
|
 |
Stool generally used for the education market. Can be used as an art stool or in science. Plastic seat with a pleasing aesthetic using holes punched through. Seat has a small lip at the back for additional support. Sits on a steel sled frame. Manufactured by Hille Educational Products |
No Rating |
Product Version: Revit Architecture 2013
3114 Downloads
|
|
|
 |
Modelled similar to metal Hydestore four post shelving unit, this floor hosted generic model family is parametric in height, depth & width. Materials are type parameters, height is an instance parameter. 3D model not shown in Plan views or Coarse & Medium. Shown as a grey dashed line on Floor Plans. |
No Rating |
Product Version: Revit Architecture 2010
9895 Downloads
|
|
|
Search