Tennis court with instance parameters to vary the sideline widths and baseline depth as well as line material, court material, and court boundary material.

Please Rate/Comment.  Thanks!

Product Version: Revit Architecture 2011

35238 Downloads

Premier SIPS, North America’s largest manufacturer of Structural Insulated Panels (SIPs), has been manufacturing SIPS for more than 20 years. Our testing and analysis programs have produced an extensive and comprehensive amount of proprietary data that allows us to help design professionals optimize designs with respect to both structural and energy concerns. Arming yourself with a SIPS product that is backed up with this accurate data helps you streamline the design process and make informed, dependable decisions.

Available at Autodesk: http://seek.autodesk.com/product/latest/agg/premiersipsbyinsulfoam/Premier-SIPS-by-Insulfoam/PremierSIPS

Premier SIPS by Insulfoam: Premier Structural Insulated Panels, SIPs, Structural Panels, Advanced Framing, Structural Wall Systems, Building Envelope Systems, Sandwich Panel, Pre-Fabricated Panel -

Product Version: Unknown

4914 Downloads

Stainless Steel air baffle / inducer with Type 304 stainless steel allen key hardware.

No Rating

Product Version: Unknown

103 Downloads

This anotation is a standared Arrow. Text can be blank or changed to say anything. Top and Bottom text controled sepratly. Size / visabilty of arrow head and length of line can be controled in the instance paramiters.

Hope it helps,

smh

Product Version: Revit Architecture 2014

8623 Downloads

Door with adjustable opening percentage and hidden line to show door pocketing into opening.  Note:  You may nead to adjust your odject styles to make the Hidden Lines under Doors Black instead of Blue.

No Rating

Product Version: Revit Architecture 2012

3423 Downloads

Series LFU009 Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. The swivel feature in the series allows for it to be used in a variety of installations, including the prevention of health hazard cross-connections in piping systems or for containment at the service line entrance. This series features two in-line, independent check valves, captured springs, and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 1/2in. - 1in. (15 - 25mm) shutoffs have tee handles. It has cast copper silicon alloy body construction for durability. The LFU009 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

174 Downloads

Tactile Ground Surface Indicators size 1000 x 300 mm (20 x 6 pieces), 3-dimensional, all dimensions comply with Australian / New Zealand standards 1428.4.1 - 2009.Base is shown as line on floor plans for easy dimensioning.

Product Version: Revit Architecture 2014

4875 Downloads

 MIFAB® Series FS1720, 12” x 12” x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

115 Downloads

These Revit Schedules are a room schedule filtered for the room named Attic and a soffit schedule that includes a soffit pretending to be the ridge vent. The soffits model across the whole roof including the eaves to get the required area. The ridge vent is a narrow soffit at the ridge the length of the ridge minus the width of the boundary. I have included the stand alone schedules with no model at www.revitcity.com . The math formulas are in the schedules and can be modified per required code. The formula for the ridge vent is the perimeter of the ridge / 2. The ridge boundary is as narrow as possible so I can get a length value. Conditional values are set to black out the values if the manufacture is not who I need it to be. I think it’s pretty cool. If you have any questions feel free to email me at JustinDesigns3D@gmail.com. Enjoy :-)

No Rating

Product Version: Revit Architecture 2015

1309 Downloads

Gangnail PosiStrut Floor Truss,  Line Based - Length is set by drawing on plan.  Parametric Depth, materials and Chord Depth/Width

Product Version: Revit Architecture 2009

10317 Downloads

Wire Shelving - Line Based/Workplane Based

No Rating

Product Version: Revit Architecture 2016

1140 Downloads

Line-based countertop w/ adjustable height and adjustable splash height.

Product Version: Revit Architecture 2008

16300 Downloads

Based on: All-Purpose Mobile Teaching Easel - Elementary, by Lakeshore

Product Version: Revit Architecture 2016

2871 Downloads

Generic vanity basin with taps/spout in adjustable bench. Basin may be semi-recessed or inserted, with position variable from centre line. Bench length, width and height adjustable.

No Rating

Product Version: Unknown

3081 Downloads

Heat N Glo 36"x16" Gas Fireplace (Slim Line Series)

No Rating

Product Version: Revit Architecture 2008

1966 Downloads

Simple Cylinder detail item.

Length and diameter are parameters. Option of a line, empty, or infinite on the end. (Picture shows the different visibility parameters.) Masking or not is also a parameter. 

This was used for deep foundation details but could have many applications.

Product Version: Revit Structure 2018

588 Downloads

Base with 14 gauge Galvanized Channel (13/16” high)

No Rating

Product Version: Unknown

42 Downloads

BVN AIR
IN LINE DUCT FANS
MIXED FLOW
YUVARLAK KANAL FANI
KARMA AKIŞLI

No Rating

Product Version: Revit Architecture 2016

704 Downloads

This family is parametric in that you can adjust the leaf height and width. The amount the doro is shown as open is determined by a formula that is based on a precentage of the overall leaf width.

I could not find a good one on line so I took a single pocket door I made and created this one from it.

No Rating

Product Version: Revit Architecture 2018

7821 Downloads

This family is parametric in that you can adjust the leaf height and width. The amount the doro is shown as open is determined by a formula that is based on a precentage of the overall leaf width.

I could not find a good one on line so I took a single pocket door I made and created this one from it.

No Rating

Product Version: Revit Architecture 2018

4004 Downloads

This is a wooden post with a concrete base, fully parametric. If you need it to be detailed, paint the concrete after loading into project. When you select levels, make sure to offset top by 6". Otherwise you will see a square line on top of whatever you are using it for. Enjoy!

No Rating

Product Version: Unknown

301 Downloads

A 3D diagram for ADA Clearances.  Has Symbolic Line representations of reach clearances, toe and knee clearances in elevations and circular turning radius in plan.  Also illustrates 2D clearances in a 3d revolved model for interference checking.

Product Version: Revit Architecture 2008

10278 Downloads

This support is used in concert with the standard lacquered cast iron adjustable faceplate,  lacquered cast iron waste fitting, adjustable ABS nipple, hardware and finishing kit.

No Rating

Product Version: Unknown

62 Downloads

MIFAB®  C1300-MF Series lacquered cast iron heavy duty access housing with fixed anchor flanges, extra heavy duty ductile iron

access cover with 6 ½” (165) clear bottom access.

No Rating

Product Version: Unknown

38 Downloads

10 layers of ventilation block wall with the parametric set-in for different of line, problem is I can\'t set parametric to the layers..Changing materials also got some problems..Sorry, I do this in a hurry!!..Somebody please correct those problem

Product Version: Unknown

8951 Downloads

Price Industries Max Security Perforated Face Grille

Lattice and perforated security grilles reduce the risk of damage and disassembly associated with traditional grilles in secure areas. With minimum and maximum security options as well as a variety of mounting types, these grilles are suitable for supply and return applications.

Featuring all-welded construction and integral wall sleeves, the MSPG perforated face steel maximum security grille is one of the most popular security grilles styles in the industry. 

No Rating

Product Version: Revit MEP 2020

88 Downloads

Single Flute of B-Deck. (Simplified) Created as a structural beam. Ends are adjustable. Allows 3d manipulation. Array to create a panel of B-Deck.  (Join to remove joint line.) Intended more for exposed material as a design element. Don't use for large expanses or it will suck up your memory. 

Product Version: Unknown

10774 Downloads

This Roof Cricket is adjustable.  The length of each leg can be adjusted individually.  The slope and material are also easy to adjust.  It is a Generic Model - Roof Based, so set it on your roof and it will line up with the roof slope.

Product Version: Revit Architecture 2009

6339 Downloads

Download: https://bimobject.com/bolon/product/zigzag-cyan 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

Born from our beautiful 2012 collaboration, this collection is based on Missoni’s classic patterns and generous colours. Using the latest weaving technology to release this fantastic colour palette, the result is a playful, confident and contemporary woven vinyl flooring range that is also durable, practical and easy to maintain. Featuring a profiled yarn, a thread with a textured surface which can be used for jacquard weave. Taking design cues from Missoni’s classic patterns – including the signature Zigzag – and highlighting warm, passionate colours, the updated collection exudes joy and confidence.  The collection also offers practical benefits including easy cleaning and maintenance, a long guarantee and full environmental certification.

Product Version: Unknown

2997 Downloads

This is a parametric detail component for a casement window section. The family is adjustable for window rough opening height and wall thickness.

This is base on the Eagle Window line.

This was created in Revit 2016

Product Version: Unknown

6485 Downloads