Padel court with material parameters and an adjustable "clearance line" around the court. Revit 2025.

Product Version: Revit Architecture 2020

1212 Downloads

Drawer unit on casters

Product Version: Revit Architecture 2011

3184 Downloads

Line based parametric wood plank fence

Product Version: Revit Architecture 2013

6064 Downloads

Slim line Modern Water Tank

Product Version: Revit Architecture 2008

14904 Downloads

A Parametric Line Based Louver System

Product Version: Unknown

9442 Downloads

PARAMETRIC OFFICE TABLE

Office reception or CEO table depending on finish and family settings.

Most parts thoroughly adjustable

Modeled in Revit 2020

No Rating

Product Version: Revit Architecture 2020

211 Downloads

Second Place - 2015 VMODERN Furniture Design Competition

Studio La Cube - Spain

The Simmis Chair plays with its symmetry from different perspectives. There is symmetry between the wood parts, highlighted by a central incision, which is the key element of the chair’s aesthetics. This incision provides lightness, balance, and visual delicacy, which are counteracted by the strength of the material and the cubic form of the lower part. There is also a second symmetry which corresponds to the inclination of the lower cube and the back of the chair – the profiles of these two elements make a symmetric figure between the higher and the lower parts.

Product Version: Revit Architecture 2018

674 Downloads

Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb.

Parameters include options for 5 finishes and 15 glass options.

Manufactured by Holtkötter.

Product Version: Unknown

4867 Downloads

Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb.

Parameters include options for 5 finishes and 15 glass options.

Manufactured by Holtkötter.

Product Version: Revit Architecture 2011

4567 Downloads

MIFAB® Series F1640, 9” (229) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 9” (229) diameter lacquered cast iron adjustable top assembly and special duty ductile iron grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.

(For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

26 Downloads

Tactile Ground Surface Indicators size 1000 x 300 mm (20 x 6 pieces), 3-dimensional, all dimensions comply with Australian / New Zealand standards 1428.4.1 - 2009.

There is 2 mm extrusion base under TGSI (unfortunately not on picture).

Product Version: Revit Architecture 2014

4186 Downloads

A detail componant spot elevation with dragable line and user defind elevations and description for Revit 2022

Product Version: Revit Architecture 2020

751 Downloads

A 9'wide, 7' high garage door based on the Clopay Classic line. Highly editable so have some fun with it!

No Rating

Product Version: Revit Architecture 2010

13165 Downloads

This is like the other cieling speaker on RevitCity but this one is 1' diameter instead of 6". 

I also found the other one to have a small glitch- a line displaying about 15 feet above the ceiling in 3D view, so I fixed that. 

No Rating

Product Version: Revit Architecture 2016

7828 Downloads

Here is a two door cabinet wall mounted with glass(Thomasville line) modeled by Team RPM

No Rating

Product Version: Unknown

12329 Downloads

Here is a single door cabinet wall mounted (Thomasville line) modeled by Team RPM

No Rating

Product Version: Unknown

4387 Downloads

MIFAB® Series R1900 neoprene vertical expansion joint with stainless steel no hub clamps.

No Rating

Product Version: Unknown

212 Downloads

Single line Railing with metal posts and  glass panels, for flat application only

Product Version: Revit Architecture 2018

24827 Downloads

Windows to fit warehouse openings. Based on Custom Window historic 8300 seies window line

Product Version: Unknown

16999 Downloads

Line Based Valet Rope. Fully Parametric. Automatically adjusts spacing by overall length.

Added some additional Parameters to allow for a single section.

Also added a base plate

No Rating

Product Version: Revit Architecture 2013

4750 Downloads

This family is drawn in plan on a line that can be locked to wall or not. There is no hardware visible.

The 4 shelves are variable in depth, thickness, spacing (total span from top to bottom), and height of top shelf.

It usually is versetile enough.

Product Version: Revit Architecture 2013

33624 Downloads

This Light is Fully Parametric. It is not hosted. Change parameters, High of ceiling, Cable Length, Pendant Length and Pendant Radius. The part witch attaches to the Ceiling can all so be angled to match the slop of the ceiling. This is done by entering a number with inches over 12" (ex. for a 4/12 slope enter 4")

The light is made by Delray Lighting Inc.

 A 2014 version can be found here. 

Hope you like it,

smh

Product Version: Revit Architecture 2015

24533 Downloads

MIFAB® Series R1960 fabricated Type 304 stainless steel downspout nozzle with hinged perforated bird screen cover in standard and flush models (Suffix -F). Are made to receive PVC, ABS or cast iron pipe inside the “A” dimension. The R1960 models “sleeve over the pipe sticking out of the wall. The R1960-F models sleeve over the pipe and are flush with the wall.

No Rating

Product Version: Unknown

260 Downloads

MIFAB® WHB Series (specify size) nesting type bellows operated water hammer arrestor with male N.P.T. connection. Bellows and body casing made of Type 304 stainless steel. WHB Series is certified to the PDI WH-201 Standard. Engineered to limit line system surge pressure UPto 1500 P.S.I.G. shall be sized and located in accordance with manufacturer’s instructions.

No Rating

Product Version: Unknown

60 Downloads

Series U009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction with a unique swivel union, two in-line independently operating check valves, a removable stainless-steel relief valve with captured springs and replaceable seat discs, four ball valve test cocks, and an air gap drain fitting. Their compact and space-saving design facilitates easy assembly and maintenance access. They are ideal for protection at health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

241 Downloads

http://www.liversbronze.com/revit-files/

Revit files are now available for all Livers Bronze railing systems. Simply complete the form and submit your Revit file request. We will then send you an email with a link to download the Revit file. Once the file is downloaded, you can load it into the desired project model by following the provided instructions that are specific to each railing system.

The Livers Bronze Revit family systems contain customizable parameters which allow control of the height, rotation and visibility for all of the handrail’s balusters, glass lines and supports. Once unpinned, balusters, glass lines and support elements slide on the host rail to the desired location. Grips are provided for maximum adjust-ability as well as the visibility option of turning them on or off, or copying if needed. We have also incorporated structural alerts when certain elements have exceeded their design parameters in order to assure proper layout requirements. Once you have one element the way you want it, you also have the option to match properties to quickly repeat the desired look throughout your project.

Systems available:

Struct-U-Rail Button Blok MirageEmpire SingularIdentic Plank Matrix Razor IconAmerican 20/20 Belmont FontanaPanel

Keywords:

Glass Panel Railing, Cable Railing, Panel Railing, Perforated Panel Railing, LED Railing, Handrails, Wall Railing, Single Line Railing

Product Version: Revit Architecture 2014

3377 Downloads

I made adjustmentsa to the one i made earlier, this one has a cage made up of generic model rings which are parametric, so you can control the wire size and spacing, the Rings are off in coarse & Medium Views and theres a dash line around the boundary to help locking, moving etc.

Product Version: Revit Architecture 2013

8286 Downloads

Eaton’s harmonic mitigating transformers (HMTs) are specially designed transformers that treat a wide variety of harmonics.

480V to 208/120V standard150° or 115°C temperature rise available Copper windings and terminals standard CSL-3 2007 Final Rule efficiencies levels increased efficiencies help to gain LEED points

No Rating

Product Version: Unknown

746 Downloads

This is a end cabinet for placing on the end of a row of cabinets sitting on a 45 degree angle reference line providing a straight edge on an angle. Feel free to comment and leave feedback!

Product Version: Revit Architecture 2008

2941 Downloads

Please Rate

·         Made to exact NFL/ NCAA dimensions

·         Adjustable sideline width

·         Has options for pro hash marks, college hash marks, or both

·         The end zone text can be changed or turned off

·         The 10 yard numbers can be turned on and off

·         Includes field goals and pylons

Product Version: Revit Architecture 2011

6997 Downloads