Version 9 line based detail component. Adjustable spacing. Let me know if you run into any problems.

Product Version: Unknown

6403 Downloads

Line based Detail Component for Roof Membrane Systems

No Rating

Product Version: Revit Building 9.1

1464 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  33 Hz - 200 Hz -3dB27 Hz - 260 Hz -10 dB
  
  


• continuous output
  
  126 dB SPL
  
  


• peak output
  
  132 dB SPL
  
  


• sensitivity
  
  100 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  one 12" Long Excursion Woofer
  
  


• dimensions
  
  38 x 18 x 30.2 inches
  
  


• weight
  
  142 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  400 W continuous, 800 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th112/
  
  

No Rating

Product Version: Unknown

98 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  48 Hz - 200 Hz - 3 dB 41 Hz -10dB
  
  


• continuous output
  
  129 dB SPL
  
  


• peak output
  
  135 dB SPL
  
  


• sensitivity
  
  101 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  one 12" long excursion woofer
  
  


• dimensions
  
  24 x 15 x 24 inches
  
  


• weight
  
  76 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  700 W continuous, 1400 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/thmini/
  
  

No Rating

Product Version: Unknown

98 Downloads

MIFAB® Series F1600-C lacquered cast iron floor drain with upper and lower bodies and anchor flanges, cast iron membrane clamp rings with primary and secondary weepholes for waterproofing membrane, neoprene expansion compensator, and standard reinforced

(specify diameter) satin finished (specify material finish) strainer.

No Rating

Product Version: Unknown

42 Downloads

SPECIFICATIONS

• coverage Pattern
  
  80Deg Conical
  
  


• operatingfrequency range
  
  113 Hz – 18 kHz +/- 3 dB70Hz – 19 kHz -10 dB
  
  


• continuous output
  
  127 dB SPL
  
  


• peak output
  
  133 dB SPL
  
  


• sensitivity
  
  101 dB (2.83 Volts into rated Z, at 1 meter) measured in free space
  
  


• driver complement
  
  one 12", one 1.4", coaxial
  
  


• dimensions
  
  32.25 x 26 x 14.5 inches
  
  


• weight
  
  51 Lbs.
  
  


• Rated Impedance
  
  8 ohms
  
  


• Power Rating
  
  400 watts Continuous, 1600 Watts Peak
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/outdoor-series/os80/#slide1
  
  

No Rating

Product Version: Unknown

278 Downloads

SPECIFICATIONS

• coverage Pattern
  
  50˚ x 100˚ H asymmetric x 50˚ V
  
  


• operatingfrequency range
  
  350 Hz - 18 kHz 50 Hz - 20 kHz -10dB
  
  


• continuous output
  
  122 dB SPL
  
  


• peak output
  
  128 dB SPL
  
  


• sensitivity
  
  96 dB SPL (2.83 Volts into rated Z, at 1 meter)
  
  


• driver complement
  
  one 10" LF, one 1" HF
  
  


• dimensions
  
  12 x 28 x 25.5
  
  


• weight
  
  69lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  400 W continuous, 800 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/synergy-horn/sh-dfa/
  
  

No Rating

Product Version: Unknown

240 Downloads

The Automatic Control Valve shall be a Ductile Iron Body and Cover design. The Valve shall have a resilient seal disc, guided top and bottom; Bottom guide will be vanes, sliding in a stainless steel seat arrangement, single seated line pressure operated, diaphragm actuated, pilot controlled, valve. The valve shall seal by means of a stainless steel seat. All parts are to be replaceable in the field without removing the valve from the line. All flange dimensions including face to face lengths shall conform to ISO Standards.

Product Version: Unknown

1192 Downloads

SPECIFICATIONS

• coverage Pattern
  
  90˚ horizontal x 40˚ vertical (0˚ on axis, 40˚ down -6dB)
  
  


• operatingfrequency range
  
  47 Hz - 18 kHz +/-3dB37 Hz - 24 kHz -10dB
  
  


• continuous output
  
  148 dB SPL
  
  


• peak output
  
  151 dB SPL
  
  


• sensitivity
  
  Band dependent
  
  


• driver complement
  
  six 18" woofers six 6" midrange drivers three coaxial HF drivers
  
  


• dimensions
  
  60 x 45 x 30 inches
  
  


• weight
  
  720 lbs
  
  


• Rated Impedance
  
  Low frequency, 6 x 4 ohm loads Midrange, 1 single 6.5 ohm load Mid High, 1 single 2.7 ohm loadHigh, 1 single 3 ohm load
  
  


• Power Rating
  
  LF > 12,000 W total, MR > 1200 W, MId hi >600 W, HF > 400W
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/jericho/jh-90/
  
  

No Rating

Product Version: Unknown

529 Downloads

The purpose of this family is to allow spatial design while considering the workflow paths of building user. It was made to otpimize the floor plan to the health procedures in a future care unit. Each line represents a different actor walking on the floor plan. Each segment of the line can be a step in the workflow, with the option to specify stop times. The bubble size is proportional to the time spent in a stop.

If you use it for any purpose, please leave a comment. This is part of an academic research and having feedback is precious. Thank you!

The structure of the family is based on the Path of Travel family, also from ReviCity. Check the tutorial on how to use it:

http://fredvanamstel.com/publications/optimizing-walking-paths

No Rating

Product Version: Revit Architecture 2012

1573 Downloads

MIFAB® CL Series (specify size) piston operated water hammer arrestor with hard drawn seamless “K” copper body, RYTON PPS piston with double o-rings (Parco # 5778-80) and CDA 360 brass M.P.T. connection. Certified to the A.S.S.E. 1010-1996 and ANSI A112.26.1M Standards. Engineered to limit the system surge pressure up to 1,500 P.S.I.G.

No Rating

Product Version: Unknown

124 Downloads

SPECIFICATIONS

• coverage Pattern
  
  60 by 40
  
  


• operatingfrequency range
  
  43 Hz - 20 kHz
  
  


• continuous output
  
  Band dependent, 150 dB SPL
  
  


• peak output
  
  Band dependent >150 dB SPL
  
  


• sensitivity
  
  112 dB SPL average, (2.38 volts into rated Z at 1 meter)
  
  


• driver complement
  
  Six 15" wooferseight 6.5"midsHigh/Mid & High, four Coaxial compression drivers
  
  


• dimensions
  
  30 X 35.6 X 48 inches
  
  


• weight
  
  432 Lbs
  
  


• Rated Impedance
  
  Low Freq, Two 3 ohm loadsMId range a single 4 ohm loadHigh, a single 4 ohm load
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/jericho/j3/
  
  

No Rating

Product Version: Unknown

627 Downloads

PARAMETRIC COMPONENTS, the #1 source for high-quality, parametric Revit® Families

BUZZI HUB

http://www.buzzispace.com/products/buzzihub

Product Version: Unknown

1470 Downloads

SPECIFICATIONS

• coverage Pattern
  
  140 x 10
  
  


• operatingfrequency range
  
  77 Hz – 15 kHz +/- 3 dB50Hz – 18 kHz -10 dB
  
  


• continuous output
  
  127 dBSPL
  
  


• peak output
  
  133 dBSPL
  
  


• sensitivity
  
  99 dBSPL measured at 10M @ 28.3V input
  
  


• driver complement
  
  Eight - 5” Coaxial drivers
  
  


• dimensions
  
  60”H x 9”W x 9”D
  
  


• weight
  
  100 lbs.
  
  


• Rated Impedance
  
  4 ohms
  
  


• Power Rating
  
  1300 watts continuous 5200 watts peak
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/sbh/sbh-10/
  
  

No Rating

Product Version: Unknown

863 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Vice President’s Desk in Senate Chambers

This model is FACE-BASED. The Desk has parametric finishes.

Thomas@loker.com

No Rating

Product Version: Revit Architecture 2020

238 Downloads

♥ ♡ BUZZI HUB ♡ ♥

It is time for fun – relaxing– quiet – privacy…

WANT MORE >>> R E V I T C O M P O N E N T S

Product Version: Revit Architecture 2010

1351 Downloads

MIFAB® Series F1620-C lacquered cast iron floor drain with upper and lower bodies and anchor flanges, cast iron membrane clamp rings with primary and secondary weepholes for waterproofing membrane, neoprene expansion compensator, and standard 1” (25)

thick, 9” (229) round, tractor grate.

No Rating

Product Version: Unknown

34 Downloads

MIFAB® Series F1100-C-DD lacquered cast iron hub drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard (specify material finish) indirect waste hub. (For non-membrane floors, use

MIFAB F1100-DD Series.)

No Rating

Product Version: Unknown

16 Downloads

SPECIFICATIONS

• coverage Pattern
  
  90 by 60
  
  


• operatingfrequency range
  
  37 Hz - 10 kHz -3 dB27 Hz - 15 kHz -10 dB
  
  


• continuous output
  
  Band dependent, average 138 dB SPL
  
  


• peak output
  
  Band Dependent, average 145 dB SPL
  
  


• sensitivity
  
  Band Dependent , average 113 dB SPL
  
  


• driver complement
  
  Low Freq six 18" woofersMid Range twenty four 5" mids, High Freq Twelve 1" compression drivers
  
  


• weight
  
  600 Lbs
  
  


• Rated Impedance
  
  band dependent LF 3 ohms Mids 4 ohmsHigh Freq. 4 ohms
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/jericho/jh-2/
  
  

No Rating

Product Version: Unknown

322 Downloads

Body Material: Low-Lead Cast Bronze ASTM B 584

Connection: Size 3/4", 1"

Connection Type:  Threaded FNPT ANSI B1.20.1

Factory Set Pressure: 50 psi

Reduced Pressure Range:  (3/4"-1") 25 psi to 75 psi

Working Pressure:  (3/4" - 1") 300 psi

No Rating

Product Version: Revit MEP 2013

1650 Downloads

White console table 61.75" x 15.75" from IKEA Hemnes line

No Rating

Product Version: Revit Architecture 2020

1317 Downloads

A simple line based detail component to use in batter banks

No Rating

Product Version: Unknown

122 Downloads

Detail line symbol for self furring metal lath. Adjustable to any length.

No Rating

Product Version: Unknown

2190 Downloads

Hi Again

one more PARAMETRIC pattern 

more are in line

Thanks

No Rating

Product Version: Unknown

191 Downloads

Parametric modern credenza

Parameters include: materials, height, length, depth, leg position and dimensions.

No Rating

Product Version: Revit Architecture 2020

1444 Downloads

Simple Counter Line-Based Object

No Rating

Product Version: Unknown

4457 Downloads

MIFAB® Series F1420-C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 1” (25) thick, 7 3/4” x 7 3/4” (197 x 197) square, (specify material finish) tractor grate.

(For non-membrane floors, use F1420 Series.)

No Rating

Product Version: Unknown

140 Downloads

950# RH RAIL, IN-LINE OPENING, ACCORDION GATE, 14 SQFT- The Reserve Series

Product Version: Revit Architecture 2009

7172 Downloads

Generic Model line based, adjustable for pitch, must insert on workplane (not face) and move to ridge.

Product Version: Revit Architecture 2009

11004 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

U.S. Senator’s Desk in Chambers

This model is FACE-BASED. The Desk has parametric finishes. Both the top and desk drawer can be either closed or open. The family is nested with some accessory items including inkwells, pencils, yellow-pad, notebook and stacks of legislation.

Thomas@loker.com

No Rating

Product Version: Revit Architecture 2020

198 Downloads