 |
SPECIFICATIONS
- operatingfrequency range
34 Hz- 300 Hz -3dB28 Hz - 400 Hz -10dB
- continuous output
141 dB SPL
- peak output
147 dB SPL
- sensitivity
117 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
two 18" long excursion woofers
- dimensions
45 x 45 x 22.5 inches
- weight
277 lbs
- Rated Impedance
switchablea single 2 ohm loadortwo 4 ohm loads
- Power Rating
3600 watts continuous 14,400 watt peak
http://www.danleysoundlabs.com/products/subwoofers/dbh/dbh218/
|
No Rating |
Product Version: Unknown
209 Downloads
|
|
 |
A beautiful desk lamp appropriate for both modern and traditional rooms alike. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
No Rating |
Product Version: Revit Architecture 2011
5098 Downloads
|
|
|
 |
A beautiful desk lamp appropriate for both modern and traditional rooms alike. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
3276 Downloads
|
|
|
 |
A beautiful desk lamp appropriate for both modern and traditional rooms alike. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
No Rating |
Product Version: Revit Architecture 2011
3220 Downloads
|
|
|
 |
The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line |
No Rating |
Product Version: Unknown
190 Downloads
|
|
|
 |
The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line |
No Rating |
Product Version: Unknown
111 Downloads
|
|
|
 |
Created to give a generic person shape in 3D with as little extraneous info as possible, but without looking clunky. No parameters.
|
No Rating |
Product Version: Unknown
24 Downloads
|
|
|
 |
Created to give a generic person shape in 3D with as little extraneous info as possible, but without looking clunky. No parameters.
|
No Rating |
Product Version: Unknown
47 Downloads
|
|
|
 |
A large table lamp in the Viennese style with a technologically-advanced dimming system, Dimm-System P1. Parameters include options for 4 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
3684 Downloads
|
|
|
 |
Out of the box Revit Wide Flange family with spray on fireproofing added! After a long time of waiting to get to this, I finally did and decided to share because it seems unavailable anywhere else online. It appears to be a highly requested family throughout a lot of forums.
Parameters include, SOFP thickness, Visibility ON/OFF, & SOFP Realistic material. Family can be flexed and does not slow more complex framed structures significantly.
Visible in plan, 3D etc. Sections nicely as well. Great for wall firestopping & MEP coordination.
SOFP will adjust to any size beam selected and will also adjust to medium/fine detail level.
In order for this family to work properly, it’s imperative, the type catalog is located within the same folder as the family. I would suggest keeping them in the default directory together:
C:\ProgramData\Autodesk\RVT 2018\Libraries\US Imperial\Structural Framing\Steel
SOFP material JPG should be loaded into default materials directory as well:
C:\Program Files (x86)\Common Files\Autodesk Shared\Materials\Textures\3\Mats
Hope this is helpful and you enjoy for free! Family was created in RVT2018 but can be upgraded.
|
No Rating |
Product Version: Revit Architecture 2018
858 Downloads
|
|
|
 |
Please tell me what you think so I can get better! .... I hope this family will be useful for you |
|
Product Version: Revit Architecture 2014
1674 Downloads
|
|
|
 |
Please tell me what you think so I can get better! .... I hope this family will be useful for you |
|
Product Version: Revit Architecture 2014
4178 Downloads
|
|
|
 |
A fixture from the Lichtstar System: an innovative interchangeable system for ceiling and wall applications. Parameters include options for 5 finishes and 41 reflectors. Manufactured by Holtkötter.
|
No Rating |
Product Version: Revit Architecture 2011
4619 Downloads
|
|
|
 |
A desk lamp with elegant proportions and versatile styling. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
1927 Downloads
|
|
|
 |
The crisp lines and elegant styling of this lamp make it an ideal lamp for any type of room. Parameters include options for 4 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
5587 Downloads
|
|
|
 |
Parametric dimensions, materials and percentage of opening. Comments and critique welcomed. _____________________________________________ Portfolio: http://www.behance.net/bernovski |
|
Product Version: Revit Architecture 2011
27252 Downloads
|
|
|
| |
This is for anyone looking for a more realistic tiled roof. Array horizontal model lines up the face of your roof at a spacing of 18", select peak_valley, gable, valley_valley, etc depending on what type of face it is, and place the line-based generic model family by line-selection. Height of tile is adjustable (good for fitting in last row). Made for a 5/12 slope, but will probably work with others. Renders beautifully. |
No Rating |
Product Version: Unknown
1984 Downloads
|
|
|
 |
Fully parametric line based glass railing.
Under type properties; Height, Thickness and Gap Thickness
Under instance properties; Yes/No Parameters for each end (I would zoom in and play with these. I programed them for ease of controlling where the panels ended. Ex; Draw the line to a wall or connect them in a corner and then use the different gaps to get the spacing right)
For a multi panel family go here |
|
Product Version: Revit Architecture 2014
15108 Downloads
|
|
|
 |
The crisp lines and elegant styling of this lamp make it an ideal lamp for any type of room. Parameters include options for 4 finishes and 2 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
4746 Downloads
|
|
|
 |
Dear BIM Friends
Body Material: Cast Bronze ASTM B 584
Connection Size: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2
Connection Type: Threaded FNPT ANSI B1.20.1
Working Pressure: 175 psi
|
|
Product Version: Revit MEP 2013
1959 Downloads
|
|
|
 |
donut line-up |
No Rating |
Product Version: Revit Building 5.1
3995 Downloads
|
|
|
 |
Line based - Parametric |
No Rating |
Product Version: Unknown
12437 Downloads
|
|
|
 |
From CAD symbol, model line based |
No Rating |
Product Version: Revit Architecture 2018
950 Downloads
|
|
|
 |
LEWIS COFFE TABLE / Frank Lloyd Wright
Low square tables in natural cherrywood, stained walnut or stained black
Dimensions in millimeters |
No Rating |
Product Version: Revit Architecture 2012
3112 Downloads
|
|
|
 |
It is a Line based detail component rather than a symbol. I made it this way so the overall length would stay the same if the scale changed. The text will change with the view scale and in the instance properties there is an input for a scale to change the arrow and circle sizes. (I preprogramed the typical scales so you can see how they work) There are 3 types of arrow heads and the text can be controlled separately.
Edit* the scale things does not work atm I will tryand fix it later.
Hope it helps,
smh |
No Rating |
Product Version: Revit Architecture 2014
2196 Downloads
|
|
|
 |
This is my first upload so please be gentel. This is a simple family that allows you to place a shower partition with a curb on 4 sides and glass for the partition, in a room. You can change a lot,
- Curb Heights - independent on all 4 sides
- Curb depth
- Overall Height
- Overall Width (you should be able to use align and lock to make it stretch.
- 2 - Panel or 3- Panel glass partition
- Each partition door has a 2D 45 degree rep for plan view.
- Each partition configuration allows you to put in two override dimensions that I will try to explain.
- Override Panel Width - If you need one of the panels to be say "6" use this to do that. When this is set to 0 it should return to equal equal.
- Override Door Width - If you need the door to be a certain width say 30" enter it here.
This model is not foolproof, although I did do a few basics to keep people out of trouble, like a minimum door height and glass thickness. But if you try to specify a panel override width and a door override width on the 2 panel with the curbs locked to the wall it will probably break. However if you do that on the 3 panel, the 3rd panel will take up the slack.
Please leave your comments for me. Thanks. |
|
Product Version: Revit Architecture 2013
18425 Downloads
|
|
|
 |
Fully parametric line based glass railing. Each panel is equal in size.
Under type properties; Height, Thickness and Gap Thickness
Under instance properties; Number of panels, Width of each panel, and Yes/No Parameters for each end (I would zoom in and play with these. I programed them for ease of controlling where the panels ended. Ex; Draw the line to a wall or connect them in a corner and then use the different gaps to get the spacing right)
For a single panel family go here |
|
Product Version: Revit Architecture 2014
26784 Downloads
|
|
|
 |
MIFAB® Series F1640-L, 12” (305) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 12” (305) diameter lacquered cast iron adjustable top assembly and special duty ductile iron
grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.
(For membrane floors, add Suffix -C for the membrane clamp.) |
No Rating |
Product Version: Unknown
98 Downloads
|
|
|
 |
one of my sweeps for you. generic model, completely parametric. line-based. |
No Rating |
Product Version: Revit Architecture 2018
620 Downloads
|
|
|
 |
Quick and easy line based generic model, fully parametric. |
No Rating |
Product Version: Revit Architecture 2018
569 Downloads
|
|
|
Search