 |
Bleacher that you can set up anywhere. Good for a gym where you need all the space you have at times. Size can be changed to suit |
|
Product Version: Unknown
16478 Downloads
|
|
 |
Based on a pinterest image. A set of clothespins with a piano design. |
|
Product Version: Revit MEP 2016
670 Downloads
|
|
|
 |
A set of bag racks for a school etc. |
|
Product Version: Revit Structure 2012
9998 Downloads
|
|
|
 |
Created this for lab planning. We didn't need to render the lab so we created simple boxes (an extrusion) with clearances and some shared parameters. I can use a specialty equipment tag for the "Type Mark" category. |
No Rating |
Product Version: Revit Architecture 2013
3020 Downloads
|
|
|
 |
Typical parameters including length / height / materials
Width is a set dimension. |
|
Product Version: Revit Architecture 2015
7564 Downloads
|
|
|
 |
Instance parameters set up for fabric and leg materials.
Please rate/comment.
Thanks! |
|
Product Version: Revit Architecture 2011
14671 Downloads
|
|
|
 |
Full set of a standard Australian 3000mm long island bench top |
|
Product Version: Revit Architecture 2016
10726 Downloads
|
|
|
 |
I took a model off of the sketchup warehouse, set parameters and materials, and also added REAL firewood. Tell me what you think below. |
No Rating |
Product Version: Unknown
2652 Downloads
|
|
|
 |
EDIT: I did not realize when creating this upload that I had included the wrong file, see comments below. The correct file is located here: http://www.revitcity.com/downloads.php?action=view&object_id=13167
Non-Wall-based family so feel free to put it wherever you like.
There are several family types within the family for the various screen sizes (the ratios should stay the same so the images you use should all be the same length and width just different sizes of each).
Family sizes include: 32", 37", 42", 47", 52", 55", 60", 65", 72"
(This has always been a peeve of mine seeing the same family 10 times with each being a different size...just make different family types!)
Enjoy! Please rate/comment. Thanks! |
|
Product Version: Revit Architecture 2011
14100 Downloads
|
|
|
 |
Made this symbol for easier use too, you can set the size from its base length in edit type. Do rate :) |
No Rating |
Product Version: Unknown
1973 Downloads
|
|
|
 |
An LOD200 model of a NORD Stage 3 HP76 Digital Stage Piano. This is created using all native Revit objects. Not meant to be parametric as this is a specific model of NORD keyboard with 76 keys. The family is a Generic Model that is Level Based allowing you to set height above stage level. Keyboard Stand is not included. This model can be used for stage planning purposes for Worship, Band and Concert settings. Revit Version 2022 |
|
Product Version: Unknown
2932 Downloads
|
|
|
 |
Mirror to finish the 3 piece set. |
|
Product Version: Revit Architecture 2010
37105 Downloads
|
|
|
 |
New & improved with official IWF dimensions straight from their website. Several types set up for men and women's bars with different finishes. A must have for any gym. |
No Rating |
Product Version: Revit Architecture 2011
3985 Downloads
|
|
|
 |
MIFAB Series F1360-TFB lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 16” (406) round, (specify material finish) tractor grate and “True-Fit” sediment bucket designed so that grate cannot be set unless the sediment bucket is in position. |
No Rating |
Product Version: Unknown
23 Downloads
|
|
|
 |
This is a parametric generic model family based on Victor Pallet Racking, select half, quarter or third shelving in type graphic parameters. Shelving boards optional. Materials are to be set as type parameters. Model elements not visable in plan view or coarse view settings, indicated in plan by dashed grey lines. keywords: racking, pallet, shelving, victor, storage, industrial, commercial, bulk storage, adjustable. |
|
Product Version: Revit Architecture 2010
17323 Downloads
|
|
|
 |
MIFAB® Series F1340-TFB-4 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 12” (305) round, (specify material finish) tractor grate and “True-Fit” sediment bucket designed so that grate cannot be set unless the sediment bucket is in position. |
No Rating |
Product Version: Unknown
44 Downloads
|
|
|
 |
This is a simple tower bolt set as a generic wall base model with adjustable height and width |
No Rating |
Product Version: Revit Architecture 2015
88 Downloads
|
|
|
 |
Circular grid, for use in scale 1/100 , 1/200 or below.
It has a mask on the border, so in shaded or realistic views wont be hidden by the graphic set. |
|
Product Version: Revit Architecture 2013
773 Downloads
|
|
|
 |
SEE WHOLE TUTORIAL OF WINDOW
https://youtu.be/LuIXSrg_1BM
SEE WHOLE TUTORIAL OF HANGING LIGHT
https://youtu.be/OY1HhuuR4Hc |
No Rating |
Product Version: Revit Architecture 2016
132 Downloads
|
|
|
 |
I have had this family in my library for many years now. I created this in Revit 2013 or 2014 originally.
It has worked very well for me however it could use some further automation in terms of adjustability in the project environment to keep it from breaking. When using please make sure you adjust the column base and all other depths/lentths before trying to change the length. This should help keep the family from breaking. You can also edit the parameters in the family editor and overwrite parameters to help alleviate the family breaking in the project environment.
The version uploaded works with Revit 2019 and up. I have plans to further develop the family and will upload updated versions as I get them ready. |
|
Product Version: Revit Architecture 2019
1878 Downloads
|
|
|
 |
Please rate and comment, thanks!
Took a while to figure out how to get these to work properly.
The track is PureEdge Pipeline with LED uplight (very cool!). Available in 2', 4', 6', 8', and 10' lengths. I'll be uploading the 4'-10' pieces. The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.
The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com
Cans be individually rotated in project.
!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!
Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).
The can light sources are point+spot. The beam angle and sourounding field angle can be adjusted as well.
You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc. This was the only was i could figure to get the individual pitch parameters to work.
I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.
Hope these are helpfull for you! |
|
Product Version: Revit Architecture 2017
1076 Downloads
|
|
|
 |
Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!). Available in 2', 4', 6', 8', and 10' lengths. I'll be uploading the 4'-10' pieces. The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot. The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc. This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you! |
|
Product Version: Revit Architecture 2017
709 Downloads
|
|
|
 |
Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!). Available in 2', 4', 6', 8', and 10' lengths. I'll be uploading the 4'-10' pieces. The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot. The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc. This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you! |
No Rating |
Product Version: Revit Architecture 2017
565 Downloads
|
|
|
 |
Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!). Available in 2', 4', 6', 8', and 10' lengths. I'll be uploading the 4'-10' pieces. The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot. The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc. This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you! |
No Rating |
Product Version: Revit Architecture 2017
458 Downloads
|
|
|
 |
One family to make a complete kitchen. Copy the family side by side and choose from: a sink, an electric hob, 2 or 3 drawers, a door, etc... Family is in Dutch language. Sorry for the wrong preview image... |
|
Product Version: Revit Architecture 2015
7934 Downloads
|
|
|
 |
A switch with an invisible model line at 7', so if you set your RCP cut plane to just below 7', outlet symbols will show up. This one is a 3-way switch |
|
Product Version: Revit Architecture 2008
8791 Downloads
|
|
|
 |
Small counter top sized Sundial at 38*(San Francisco Ca, USA). I put this together to test it with the sun settings before I built it and it works 100% fine if you set it up right. |
|
Product Version: Unknown
2787 Downloads
|
|
|
 |
THIS IS NOT A DOOR FAMILY. This is a family witch you can load into your existing/new door family’s giving them the ability to have an adjustable door swing.
To use delete out the existing 2D door swing lines and then import this family. Use align to lock this family into place and link the parameters from this family into your door family. Total process should only take 1-2 minutes.
This is a Fixed model from the one I uploaded before. This one works with all angle from 1-179°
Hope it helps
smh |
No Rating |
Product Version: Revit Architecture 2014
2103 Downloads
|
|
|
 |
www.REVITCARS.com More cars for plans, sections and elevations. Enjoy! |
|
Product Version: Unknown
32700 Downloads
|
|
|
 |
MIFAB® Series MC-41 floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
29 Downloads
|
|
|
Search