Series FS-730 12 in (305mm) square x 6 in (152mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

150 Downloads

Series FS-740 12 in. (305mm) square x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

164 Downloads

Series FS-760 12 in. (305mm) round x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

207 Downloads

Height: 580 mm 

Length: can be set through the number of sections

No Rating

Product Version: Revit Architecture 2019

810 Downloads

Outdoor Bench found in Grindelwald, Switzerland - part of set

No Rating

Product Version: Unknown

11 Downloads

Outdoor Table found in Grindelwald, Switzerland - part of set

No Rating

Product Version: Unknown

19 Downloads

Set for materials. Includes Mooring rope with hide function.

Product Version: Revit Structure 2016

2125 Downloads

Series FS-770 4 in. x 8 in. (102 x 203mm) rectangular x 4 in. (102mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

160 Downloads

PRICE CSRD Series combination supply / return directional diffusers are available with extruded aluminum louvered blades for supply air and an eggcrate core for return air. The performance characteristics are excellent; the diffuser handles a large amount of air for a given set of outside dimensions with low pressure drops and noise levels. The CSRD is sized to match rooftop air conditioners in the most popular capacities.

No Rating

Product Version: Revit MEP 2020

120 Downloads

This is a tower section which is 99% parametric.  You can adjust the column thickness, overall width and length.  The beams will adjust with the column dimensions.  This tower section is placed as a "column".

A couple things:

1) The crossmember thickness is not adjustable.  I don't know, i just had a hard time trying to set it up.  If anyone wants to take it and run with it, please do.

2) To make a tall tower you simply stack these columns, if you want to adjust the height of a section you can set its offset from the level its on, then you have to adjust the column height to match.  Simply changing the column height will NOT change the height of the section.

It's my first attempt at a parametric object.

Product Version: Revit Architecture 2013

2730 Downloads

Series FS-710 8 in. (203mm) square x 6 in. (152mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

103 Downloads

Series FS-750 12 in (305mm) square x 10 in (254mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

86 Downloads

Series FS-850 16 in(406mm) square x 12 in (305mm) deep flanged sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate,aluminum dome bottom strainer, and no hub outlet.

No Rating

Product Version: Revit Structure 2014

76 Downloads

Outdoor Bench with Back found in Grindelwald, Switzerland - part of set

No Rating

Product Version: Unknown

11 Downloads

I have taken a manufacturers family - redrew it - so every curve is tangentle to other planes - hence with lines on - no lines between formed surfaces. This is how drawing should be. When 3D view set at Scale 1:1 - therefore no thick line work. In this instance no linework turned on anyways.

Manufactured items in sheetmetal, plastics, timber etc, it is vare rare to have a sharp corner on it. All planes should have a radiused chamfer - just look around your office - hard to find two surfaces coming together with sharp edge. 

Have posted this here solely to assist others on how to draw and also how to display.

To many rubbish families posted here - learn and create each one better than the last one.

Any comments - feel free - 

Product Version: Revit Architecture 2014

9640 Downloads

Face based recess and cutout

No Rating

Product Version: Revit Structure 2020

567 Downloads

Revitfamily.biz

This is a very parametric craftsman style base cabinet.  You can change the typical length, width, height, and material, plus put on end panels and if you crack the family open, there are even more easter eggs.  Check it out.

If you would like more crazy parametric cabinets in different styles check out this video

Product Version: Revit Architecture 2017

7815 Downloads

Series FS-720 8 in (203mm) round x 6 in (152mm) deep cast iron sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (MJ)

No Rating

Product Version: Revit Structure 2014

132 Downloads

Contains 10, 20 & 40 Foot variations with High Cude variations as well.

This version has been fixed to ensure the Height takes into account the roof thickness. I've used a parametric workaround for that rather than re model the whole thing - since the original height setting was created by someone else

Param for door Visibility settings of components with additional Course View and plan view settings to help create clearer graphics. Metric Units. Rationalise Material naming & asset 

NOTE: Visibility of roof set to show in Coarse view so that it can been seen in site-plan type views set to turn off in other views to ensure internal volume can be seen.

Product Version: Revit Architecture 2014

14827 Downloads

No Rating

Product Version: Revit Architecture 2019

64 Downloads

Body Material: Low-Lead Cast Bronze ASTM B 584

Connection: Size 3/4", 1"

Connection Type:  Threaded FNPT ANSI B1.20.1

Factory Set Pressure: 50 psi

Reduced Pressure Range:  (3/4"-1") 25 psi to 75 psi

Working Pressure:  (3/4" - 1") 300 psi

No Rating

Product Version: Revit MEP 2013

1644 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero.  Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc.  etc.  Lallan Ji

Most params are shared Params

Product Version: Revit Architecture 2013

1238 Downloads

Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero.  Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc.  etc.  Lallan Ji

Most params are shared Params

Product Version: Revit Architecture 2013

2659 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Both, Large, or SmallThis is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can select which plates you want visible (Plate 1, 2, or leave both checked). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish.

No Rating

Product Version: Revit Architecture 2020

956 Downloads

The pattern is currently scaled to 3x12, if you need something larger or smaller change the import scale. For example, a 6x24 tile would be imported at 2.00 scale.

To rotate the pattern to 45 degrees, fill a region then rotate using the rotate tool and then edit the boundaries to fix the edges.

If you are having trouble downloading the file, right click on the page of code and do a save as file. Set the type to all files and change the .txt to .pat. If .pat is already selected you may still need to erase it and type it in manually. If you save the file and it appears on your computer as a text file that opens with notepad, save that file as a .pat file and Revit should be able to import it as a hatch pattern.

Product Version: Unknown

6130 Downloads

This is a sketchup model converted to revit. I set materials and peramaters. Tell me what you think below! Please Rate!

No Rating

Product Version: Revit Structure 2017

2241 Downloads

 MIFAB® Series FS1720, 12” x 12” x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

114 Downloads

this is a window curtain wall panel, so it can be scheduled. you need to bugger around though by adding the conditional statement

if(schedule id = 1,width+frame,width)

if you want the schedule dimensions width and height to be equal to the windows in a combined schedule.

No Rating

Product Version: Unknown

2002 Downloads

GATE ... it is door fmily gate with paremeter. my desi indian idea for gate.

just load in your project draw wall and put it like door. so download, use, edit ,and enjoy

Product Version: Revit Architecture 2009

65141 Downloads

To modify leather color and metallic tube color, manage "pelle nera" and "acciaio lucido" from Material Manage on Revit

Product Version: Revit Architecture 2010

25032 Downloads