 |
Decorative boulders family RA 2010 Check out My projects made in Revit |
|
Product Version: Revit Architecture 2010
31516 Downloads
|
|
 |
This is a Raised Floor System model after Haworth's Raised Floor System. It is parametric, were you can set the FFE, change out the floor panel type, material, width, and length, ability to control the visibility of pedestals and finish floor tile. The Pedestal are set to be only visible in fine view mode
|
|
Product Version: Unknown
17843 Downloads
|
|
|
 |
Full parametric element.
You can set the length of fence, the material, the height of fence...
When you set the full length then the fence make automatically the allocations.
Much more full parametric elements:
www.revittuning.com
Comming soon |
|
Product Version: Revit MEP 2010
49953 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
72 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
60 Downloads
|
|
|
 |
Curb with gutter has Length as an Instance parameter; gutter width, curb width, and curb depth as type parameters, so you can set your curb once and just change the lengths. It is just a straight segment of curb, set to a default revit material of concrete. Please let me know if there are any bugs. |
|
Product Version: Unknown
11833 Downloads
|
|
|
 |
Nested 1DL1SL window having 1 frame of 2 Win bay & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite simply set their Ht to zero. Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc. etc. Lallan Ji |
No Rating |
Product Version: Revit Architecture 2015
736 Downloads
|
|
|
 |
Nested SL window having 1 frame of 2 Win bay & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite simply set their Ht to zero. Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc. etc. Lallan Ji |
|
Product Version: Revit Architecture 2015
1077 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
74 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
60 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
69 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
120 Downloads
|
|
|
 |
Hi Guys, there you go. I had a veeery quiet (not to say boring!) weekend but extremelly productive. Managed to create this door family I had planned for a while.
It has an extensive list of parameters you can change but the file is not too big.
I uploaded the printscreen of the list of parameters as well but I don't know why it doesn't show. Apparently I can only upload one jpeg file.
Please rate it and let me know if you find any problems using it. |
|
Product Version: Revit Architecture 2011
6672 Downloads
|
|
|
 |
Hydralic Glass Elevator. Mechanical Room Basement. Elevator is at base level. Open for family/component editing. Use of another creators lighting (see stair light). Currently set for 5 levels each 13'-4" and basement 6'-0". |
|
Product Version: Revit Architecture 2009
51690 Downloads
|
|
|
 |
Nested 1DL1SL window having 1 frame of 2 Win bay & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite simply set their Ht to zero. Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc. etc. Lallan Ji |
No Rating |
Product Version: Revit Architecture 2015
887 Downloads
|
|
|
 |
Nested 2DL window having 1 frame of 2 Win bay & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite simply set their Ht to zero. Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc. etc. Lallan Ji |
No Rating |
Product Version: Revit Architecture 2015
925 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
|
Product Version: Revit Architecture 2009
931 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
885 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
1651 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
|
Product Version: Revit Architecture 2009
1508 Downloads
|
|
|
 |
A VERY STANDARD PIPE THAT IS PARAMETRIC, ITS HAS A PIPE WALL THICKNESS OF 30MM, I HAVE SET UP A FEW DIFFERENT PIPE RADIUS ALREADY, BUT BY EDITING THE FAMILY YOU CAN HAVE WHATEVER PIPE THICKNESS YOU LIKE. ITS STRETCHABLE BY BOTH THE INPUT AND DRAG METHODS. THE MATERAIL IS ALSO EASILY CHANGABLE. |
|
Product Version: Unknown
8457 Downloads
|
|
|
 |
This door has elevation and plan swing lines for both ways. The swing lines are set to only be visible in coarse and medium settings. Material parameters set for the panel, both kick plates, and the door frame. Made form Eliasons specs and documents. Please rate and comment. |
|
Product Version: Revit Architecture 2010
3927 Downloads
|
|
|
 |
Cast an artistic, scalable graphic symbol on your plans with real-time shadows that adjust to your solar study. And when viewed in elevation, just wow!! A true picture of the fluid and ever-dynamic real-life environment on your designs.
Explore more of these free families at https://dartfamilies.com/ |
|
Product Version: Revit Architecture 2020
2320 Downloads
|
|
|
 |
Introducing the Kids Chair and Table Revit Family—designed for fun-filled creativity! This playful duo combines colorful, child-friendly shapes with functionality, perfect for little builders. Bring joy to any room with a set that sparks imagination while fitting seamlessly into your Revit projects! |
No Rating |
Product Version: Revit Structure 2020
919 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
4417 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
2848 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
|
Product Version: Revit Architecture 2009
1988 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
907 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
1655 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for a zip file of all our Kolbe SketchUp Ultra Series Radius models. |
No Rating |
Product Version: Revit Architecture 2009
1075 Downloads
|
|
|
Search