A Shorter Match For Four Drawer Dresser

Product Version: Unknown

9415 Downloads

Generic Model Wall Based ADA Family Resroom placard. 

No Rating

Product Version: Revit Architecture 2017

5141 Downloads

Dimension family create with Revit 2022

Product Version: Unknown

366 Downloads

Curtain panel family based on Pilkington Profilit K22 channel glass.  Set vertical grid pattern to minimum spacing of 9.13in (232mm)

Product Version: Revit Architecture 2009

8645 Downloads

This door is loosely modeled to the Swingflex Hygiene doors commonly used in trafficable food prep areas, materials are set as intance parameters, so set these in the element properties.  Fully parametric. Created in Revit Arch 2010.

No Rating

Product Version: Revit Architecture 2010

3062 Downloads

This door is loosely modeled to the Swingflex Hygiene doors commonly used in trafficable food prep areas, materials are set as intance parameters, so set these in the element properties.  Fully parametric. Created in Revit Arch 2010.

No Rating

Product Version: Revit Architecture 2010

3498 Downloads

New english version with report function.

This door is not a so simple one.

Free variable parameters:

Door width, Door height,

Sill on/off switch- blinds on/off switch,

blinds put up/down function with shading procent parameter,

built-in blinds on/off switch,

you can set the door opening angle (look the doorhandle),

you can modify the section number (case number),

you can set the opening section position,

the section number is able to set unlimitedly.

On the picture only one door element is seenable!

It was made by an building ingenieur not by an architect. My colleague told me to write this...

Product Version: Revit MEP 2010

7205 Downloads

Afternoon guys.

Heres a quick wall shelf i've done based on the following link

http://st.hzcdn.com/simgs/6c71220d0d922d4b_4-1578/modern-display-and-wall-shelves.jpg

This family is face based. I couldnt get the actual size so i've given the family width and height parameters. You'll see in the rendered image multiple shelves, there is one shelf within the family but i've given it a instant parameter for the materials and set up 5 different colours, Yellow, white, black, Red and purple.

Simple load in the family and then copy it around and change to what colour you want, this way you can custom the pattern you create.

Enjoy

Product Version: Revit MEP 2014

9270 Downloads

A UB (universal beam) that tapers from a set size at one end to a set size at another (eg 180UB22 to 460UB67). Took a long time to figure out how to make it, but the actual making was simple.

Can split an existing beam into 3 pieces, change one to a different size, and switch the centre piece to one of these. Enjoy.

No Rating

Product Version: Revit Architecture 2014

5373 Downloads

A simple scale for presentation drawings.

Controls include:

• Set scale 1:50, 1:100, 1:200 or 1:400


• Set north angle


• Switch scale length 5m or 10m


• On/off for annotations

Product Version: Revit Architecture 2018

6592 Downloads

Parmetric table and chair set.

Uploadeing the furniture family that I created that was shown in my tent.

There are a lot of parameters that you can change as type or instance..

Sorry for taking so long to upload it.

Enjoy!

Product Version: Revit Architecture 2016

7135 Downloads

This is a parametric generic model family based on Victor Pallet Racking, unit is set as a 3.6m high unit & has two shelving levels.  Height, depth & width are parametric, shelving beams remain top & centre of unit.  Materials are to be set as type parameters.  Model elements not visable in plan view or coarse view settings, indicated in plan by dashed grey lines.

 keywords: racking, pallet, shelving, victor, storage, industrial, commercial, bulk storage.

Product Version: Revit Architecture 2010

7040 Downloads

This window family has type parameters to drive shim space, frame, mullion, & sash width & depth, glazing unit thickness and materials. Also, wall sheathing location can be set by instance for different wall assemblies, the flange setback will control how far in front of the sheathing the window will project. Lites & transom can be toggled on or off. Also, this family features nested families for picture, casement, awning, gliding, & single hung operation with proper representation in elevation for window, lites, and transoms. This should accommodate a wide variety of window configurations in a single family. 

Product Version: Revit Architecture 2015

9083 Downloads

flat (cardboard cut-out) scalie

family

Product Version: Revit Building 8

13863 Downloads

This family is based on a previous revit city fixture. Parametric controls were added for the height of the light source, arm, arm extension and bracket. The pendant cable stretches to the Instance Parameters you set.

Product Version: Revit Architecture 2012

2655 Downloads

Made this simple suspension cable for a set of horizontal window shaders i was working on.  Didnt have time to make them parametric but shouldnt be too hard to modify the family directly.

Enjoy.

No Rating

Product Version: Unknown

2233 Downloads

I created this grass family for Revit (2015-2019)

Watch this video to know how to use this family

https://www.youtube.com/watch?v=63YDRQbql8o

My blog (where I share free Revit practice files): www.cadneeds.blogspot.in

My YouTube channel: MTH Revit Tutorials

Product Version: Revit Architecture 2015

27249 Downloads

Chaise Lounge for decks and pools.

Different types set up for back angle (Flat, 15 deg, 30 deg, 45 deg).

Instance parameters set for Frame Material and Strip Material

Please Rate/Comment.  Thanks!

Product Version: Unknown

17958 Downloads

10 layers of ventilation block wall with the parametric set-in for different of line, problem is I can\'t set parametric to the layers..Changing materials also got some problems..Sorry, I do this in a hurry!!..Somebody please correct those problem

Product Version: Unknown

8887 Downloads

Sink Base Dimensions: 2'1.5"D, 2'1.75" W, 2'10.5" H

Faucet Dimensions: 13" W (8" spread)3" deep, 11.25" H

Designed in Revit LT 2015

No Rating

Product Version: Revit Architecture 2015

3522 Downloads

This louver is fully parametric; adjust length, angle and thickness of louver. The family automatically calculates the number of blades needed to fill the opening.

Product Version: Revit Architecture 2008

33463 Downloads

Pass-thru based on Bobrick B505 specifications. Family set up to allow for right, left and opposite door swings, and should accomodate veriying wall thicknesses. Enjoy

Product Version: Revit Building 9.1

4138 Downloads

Generic Model Main Speakers.

Parametric materials and dimension (height).

(1 of 3)

No Rating

Product Version: Revit Architecture 2019

3009 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. 

No Rating

Product Version: Revit Architecture 2020

2588 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. 

No Rating

Product Version: Revit Architecture 2020

1619 Downloads

2 Pick family robe with user defined number of doors

No Rating

Product Version: Revit Architecture 2008

3304 Downloads

Revit wooden pendant light family use in your interior design projects

No Rating

Product Version: Revit Architecture 2020

1678 Downloads

Two Step Locker modelled from Cemac's Precision locker range, non - parametric, Dims: 1800h x 450d x 375w. Generic Model, Made in Ravit Architecture 2010.  Materials are set up as parameters, set in Element Properties dialogue.

Product Version: Revit Architecture 2010

19141 Downloads

First upload to the site. Let me know what you think. :)

I created this in response to Ystergesig query on how to adjust the radius of a coil. As I didn't know I set out to make a adjustable coil of my own. This family consist of three families Coil 1, Coil 2 and Blades.

The attached family has the following parameters than can be adjusted. Radius of the Coil (Default 500mm)Wire Thickness (default 10mm radius)Array (default 12)

Any queries let know. 

Shatner86

Product Version: Revit Architecture 2014

4801 Downloads

This is a highly parametric kitchen family that will generate a huge variety of cabinets. Most of the parameters are shared and will schedule. I have included a a number of wood grains that render nicely.

No Rating

Product Version: Revit Architecture 2011

6971 Downloads