angulo de inclinacion, grosor y ancho parametricos..... corte de bordes: a escuadra(slope, thickness and width parametric.... edge finish: square)

No Rating

Product Version: Unknown

2016 Downloads

There is no pipe in structural framing for some reason. there is one in structural columns but not framing.  So I made one.

No Rating

Product Version: Revit Architecture 2013

6379 Downloads

The bucket bracket is to be used at the ends of a wood beam. This download includes the standalone bracket family file. Visit my site below to get the bucket bracket integrated into a beam. All parameters are shared, so they can be used in schedules. The detail of the model has to be medium for the plates to appear, and fine for the bolts to appear.

See http://dylanbrowndesigns.com/resources/parametric-timber-connections-for-revit/ for an illustrative guide on how to use the connector.

This file was made in Revit 2018.

No Rating

Product Version: Unknown

4031 Downloads

SFRM can be placed on any beam, column, or brace.  All parameters are instance, including SFRM thickness.  Fireproofing is placed adaptively.Easiest placement is in 3d view, medium detail, hidden line, place on face.  Adaptive points need to be placed counterclockwise, as shown in the image.  SFRM can be placed from above or below the beam/either face of column or brace.Revit version 2016.

No Rating

Product Version: Revit Architecture 2015

1257 Downloads

This is a 6 panel king post truss.  Variable components are: top and bottom chord width, web width, span, slope, throat depth, and left and right eave overhangs.

Product Version: Revit Structure 2008

6927 Downloads

Shear Tab Connection (Single Row), full configuable, plate size, plate thickness, number of bolts,  bolt location, bolt size, etc. Required to be hosted to an element (ex. beam or column). Will cut bolt holes in beam with the use of the "cut" function under the "modify" tab.

No Rating

Product Version: Revit Structure 2013

4704 Downloads

Shear Tab Connection (Double Row), fully configurable, plate size, plate thickness, number of bolts, bolt location, bolt size, etc. Required to be hosted to an element (ex. beam or column). Will cut bolt holes in beam with the use of the "cut" function under the "modify" tab. 

Product Version: Revit Structure 2013

3831 Downloads

Structural Beam

No Rating

Product Version: Revit Architecture 2009

3515 Downloads

Structural Beam

No Rating

Product Version: Unknown

2919 Downloads

Structural Beam

No Rating

Product Version: Revit Architecture 2009

2343 Downloads

Structural Beam

No Rating

Product Version: Revit Architecture 2009

2089 Downloads

NON PRISMATIC STEEL BOX SECTION BEAM

full parameters 

Create By Mohamed Mostafa 

at Revit 2016

My Channel Youtube

https://www.youtube.com/c/MohamedMostafaAlsharif

My Page in FaceBook

https://www.facebook.com/3dquality

Product Version: Revit Structure 2016

590 Downloads

You can modify the lenght and height of the beam

Product Version: Revit Architecture 2014

5074 Downloads

Mat'ls, length, column and beam spacings are parametric.

Product Version: Revit Architecture 2015

9012 Downloads

Using advanced technology, iLevel manufactures engineered lumber that is consistently straight and strong, and that resists bowing, twisting, and shrinking.

That means less waste, easier installation, and higher design values for starters; plus fewer callbacks, shorter cycle times, more design flexibility, and lower overall installed cost in the end. iLevel® Trus Joist® TimberStrand® LSL, Microllam® LVL, and Parallam® PSL are structural solutions you can count on—guaranteed.

Product Version: Revit Structure 2009

5231 Downloads

Using advanced technology, iLevel manufactures engineered lumber that is consistently straight and strong, and that resists bowing, twisting, and shrinking.

That means less waste, easier installation, and higher design values for starters; plus fewer callbacks, shorter cycle times, more design flexibility, and lower overall installed cost in the end. iLevel® Trus Joist® TimberStrand® LSL, Microllam® LVL, and Parallam® PSL are structural solutions you can count on—guaranteed.

Product Version: Revit Structure 2009

5281 Downloads

Draw it as a beam. Adjust beginning and end elevations to acomodate terrain.

Product Version: Revit Architecture 2011

13336 Downloads

Wood frame stair with 100mm support beam

Product Version: Revit Architecture 2017

1957 Downloads

14' long kayak, 28" beam, very simple

Product Version: Unknown

9578 Downloads

Structural Profile made off wood and manufactured by Moelven

http://www.moelven.com/dk/Produkter/Trae-konstruktioner/Trakonstruktioner/Moelven-bjalkesystem/I-bjalke/I-Bjalker/?filters=Kategori%202%7CI-bj%C3%A6lke;

No Rating

Product Version: Revit Architecture 2013

4062 Downloads

Structural Profile made off wood and manufactured by Moelven

I also made a matching stainless steel bracket 

http://www.moelven.com/dk/Produkter/Trae-konstruktioner/Trakonstruktioner/Moelven-bjalkesystem/I-bjalke/I-Bjalker/?filters=Kategori%202%7CI-bj%C3%A6lke;

No Rating

Product Version: Revit Architecture 2013

2519 Downloads

this is a shading device made od wood to make a shading in the landscape. you can change hight, dimentions of the top and the beam.

No Rating

Product Version: Unknown

1149 Downloads

Victorian bracket, 3d parametric, to attache between post and soffit or beam.

Product Version: Unknown

8371 Downloads

Box truss made of tubular elements. Used it for a pipe bridge. Fully parametric. Is a beam in Revit, so can be inclined as well.

Product Version: Revit Structure 2014

13408 Downloads

Double/Clip Angle Connection (Single Row), full configuable, angle size, bolt size, number of bolts,  bolt location, etc. Bolts can be toggled on and off (beam and girder size independently) to model a welded/bolted clip angle or all welded clip angle. Required to be hosted to an element (ex. beam or column). (**Update 9-17-13, added "cut" feature, will cut bolt holes in beams/colums with the use of the "cut" tool under the modify tab. Added ability to switch the angle long legs towards the beam or girder)

Product Version: Revit Structure 2013

5008 Downloads

Simple I-beam shaped wall sconce.

No Rating

Product Version: Revit Architecture 2020

1567 Downloads

Parametric Piling wall complete with capping beam.

No Rating

Product Version: Revit Architecture 2017

1647 Downloads

Structural Rectangular Beam Concrete

Product Version: Revit Architecture 2010

16904 Downloads

Boat lift is designed to set on 8" pilings aprox.7' above dock's deck with a spacing of 12' in length and 12' in width.  A boat can not exceed a 10' beam and a 30' length.

No Rating

Product Version: Revit Architecture 2017

1533 Downloads

This carport provides parametric control of numerous geometric and material constraints.  Roof pitch, Roof Size, Column spacing, Column Count Beam and Post sizes, Etc.

Made for Revit 2017

Product Version: Unknown

9467 Downloads