This family has 4 different styles of residential exterior doors (vision, full lite, half lite, flush) with either 2 or 4 inch heads. It also has an optional storm door that can be turned on or off by instance. Door, storm door, glazing, and storm door handle all have parametric materials.

Product Version: Revit Architecture 2014

52877 Downloads

Fully parametric wall niche. A window family; adjust height, width, depth, arch height, sill height, depth, thickness, and material.

Product Version: Revit Architecture 2011

12397 Downloads

Fully parametric internal door.

Parametric door lining, door stop, architrave, frame & door tolerances, etc.

Openable to any angle in 3D (up to 179deg).  For some reason it doesn't like 180deg, but this would be physically impossible for a real door anyway.

One quirk: the angle must be changed in less than 120deg increments or the door handle position tends to break.  I'm sure this can be fixed easily enough, but I didn't find the time to do it yet...

Product Version: Revit Architecture 2013

74809 Downloads

Modified sliding pocket door including architraves, set to show door 3/4 open on plan and 3D

Product Version: Revit Architecture 2011

40196 Downloads

This window family is fully parametric.

Product Version: Revit Architecture 2008

19675 Downloads

Door including options to have architraves, door handles (either knobs or levers) and also were these handles are to be located. ie: Only handles to the exterior and architraves to the exterior for a double cupboard door... Also includes the usual adjustable door swing and setback to whether the door is flush or recessed as well as being able to make the doors uneven if wanted.

Product Version: Unknown

22774 Downloads

Thought it was time I put something back. Parametric sliding door with pelmet. You can change Height Width Door Cover and Door Clearance and Materials and it will sort itself out.

Product Version: Unknown

20562 Downloads

Here's a framless glass door that I modified from another door type.  Has parametrics so you can change the door size, thickness, handle height, and schedules with your other doors.  Great for use in shower rooms with gyp. board or glass walls, etc. Hopes this helps those of you who are looking for this type of door!  :)

Product Version: Revit Architecture 2012

152223 Downloads

Parametric single flush door - Metric

Modern design

Material can be applied for Door leaf, Door Jamb, and Door knob

Product Version: Revit Architecture 2012

64911 Downloads

Warehouse Industrial Sliding Door (Adjustable Size) With A Regular Door (Adjustable Size and 45 or 90 Degree Swing)Inserted Inside The Sliding Door

Product Version: Revit Architecture 2016

10533 Downloads

contemporary barn door on rail. parametric door and frame. will tag for your door schedule.

Product Version: Revit Architecture 2016

57500 Downloads

The door frame will adjust with the wall thickness and the door swing is adjustable.

No Rating

Product Version: Revit Architecture 2013

13802 Downloads

One Nested Door having 2 Frames & 2 Leaves Make more than 100 TypesMulty lite varies 1Vx1H to 10Vx4H &Lites can be Glass or solid, 2ndry Frame width can be zeroVent Ht can be zero for door without Vent.Flush door can be panel door by inputing Mould depthSingle Rebate Wooden door frame can be change to double RebateHollow Metal door frame is double rebate onlyMaterial of different parts of door can be differentOperable 2D swing represent corresponding Leaf type3D swing is also operable, Grill Y/N in Vent

Product Version: Revit Architecture 2013

17509 Downloads

Revit 2019

Geometrically proportional Oogee arch. Face based recessed

Arch width(W) controls Everthing

Recess Control depth

Addtional ArchBase parameter give addtional height options

Sugesstion and comments Welcome

No Rating

Product Version: Unknown

194 Downloads

Reloaded the earlier door Project after minor rectification.

One Nested Door having 2 Frames & 2 Leaves Make more than 100 Types. Multy lite varies 1Vx1H to 10Vx4H & Lites can be Glass or solid, 2ndry Frame width can be zero. Vent Ht can be zero for door without Vent. Flush door can be panel door by inputing Mould depth. Single Rebate Wooden door frame can be change to double Rebate. Door handle Type can also be change with their elevation.  Hollow Metal door frame is double rebate only. Material of different parts of door can be differentOperable 2D swing represent corresponding Leaf type. 3D swing is also operable, Grill Y/N in Vent  --Lallan Ji

Product Version: Revit Architecture 2013

18037 Downloads

An 7' and 8' high partially parametric Garage Door, with trim

Product Version: Revit Architecture 2008

17631 Downloads

This is a door hinge which is a face based model.  When placed on the reveal of a door frame it allows another faced based model of a door panel (use the door's hinge edge as the face) to be placed on it. The family type variable opening angle can then be employed to open the door. This can also be used for opening windows.

Product Version: Revit Architecture 2014

3083 Downloads

Nested door having 2 door frames & 2 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2013

14552 Downloads

Nested door having 2 door frames & 3 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2013

22071 Downloads

Nested door having 2 door frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2013

13073 Downloads

door, colonial, georgian, glass window, round door knob, panels, brown, white, nohs, nohs door 

Product Version: Unknown

11305 Downloads

This is a basic security storm door with no screen or number of bar control. It does not cut the wall but allows you to place it in front of an existing door. There is an option to open the door 90 or 180 degrees in plan view.

Product Version: Revit Architecture 2012

13904 Downloads

This is like a garage door except that it is not flush with the ground. You find them in service windows etc. 

It is fully parametric (height, width, elevation, size of panels, materials)

REVIT 2016

Product Version: Unknown

24374 Downloads

The basic Revit single panel door adjusted so door swing is 45 Degrees in plan.  Less clutter.

Product Version: Unknown

5661 Downloads

Door Closer in Revit 2017 for all kinds of doors. I looked for one for decades on this site and I couldn't find one separate from the door. Now you can put a door closer to any of your custom made doors.

Product Version: Revit Architecture 2017

2019 Downloads

In this Parametric door family a part from changing the size and materials as parametric option you will even have the option to change door panels like flush door or stile door panel. This is made in revit 2016 you wont be able to open it in older versions. If you find it useful please rate it. 

Product Version: Unknown

11152 Downloads

This window is fully parametric, as the title suggests. You can change the window's width, height, material and style. It supports single hung, hanging sliding, and casement styles. It comes with built in trim, shutters(toggleable), and transoms(toggleable); all of which are also parametric for both size and material. Transoms include both square and arched transoms.

Notes:

All materials are set to default grey material by default, with the exception of the glass material.

I havn't figured out how to toggle off openings when toggling off transoms, so put your wall material into the windows type to cover up the opening left behind.

You should be careful when adjusting arched transom sizes. Make sure that the size you are trying to create is even possible.

I didn't include inside trim because it was no use to me, comment if you'd like me to do so.

Any and all suggestions are appreciated.

If you plan on editing the window to suite your needs better, feel free to do so, but a word of caution; there are a lot of hidden aspects, and even the most subtle of changes can cause constraint errors. You might be better off leaving a suggestion.

Looking Forward To:

-Arched shutters to match arch transoms.

-Another shutter style.

-More trim options.

-User suggestions.

Product Version: Revit Architecture 2012

14479 Downloads

Door with jamb and adjustable door panel

Product Version: Revit Building 9

24080 Downloads

This door has a 2"x4" metal frame. The door opening it creates is 2" wider thsn the door and you can dimension to the M.O.

No Rating

Product Version: Revit Architecture 2010

4335 Downloads

This family has been in the works for some time now. It has a steel door frame that embeds itself in the concrete, cuts the wall as needed and had the door panel.  The door frame also adjusts itself to wall thicknesses

Product Version: Revit Building 9.1

2577 Downloads