 |
It's very generic but a start. You can change the materials and size. |
No Rating |
Product Version: Revit Architecture 2019
1523 Downloads
|
|
 |
A parametric wall cabinet/ display case with 4 doors. You can change the width, depth, height and materials. The doors will remain equal to each other in size. |
|
Product Version: Revit Architecture 2016
4665 Downloads
|
|
|
 |
Full Version
🔗 Gumroad – Full LOD 400 Version:
.javascript:mctmp(0);
🔗 Etsy – Parametric Door Family (LOD 400):
javascript:mctmp(0);
javascript:mctmp(0); |
No Rating |
Product Version: Revit MEP 2020
15 Downloads
|
|
|
 |
Marvin's commercial double door family that is not on their website - created by modifying Marvin residential double door family |
|
Product Version: Revit Architecture 2011
19800 Downloads
|
|
|
 |
Not fully parametric; the width should work, but the height definately won't. the logistics of making a parametric stained glass window just seem a little impossible. yes the file is HUGE. any suggestions on how to make it smaller are certainly welcome. |
|
Product Version: Unknown
9122 Downloads
|
|
|
 |
Tall kitchen cabinet with built-in microwave- 27" wide.
Editable. |
|
Product Version: Unknown
12892 Downloads
|
|
|
| |
You can control blades depth, slope and count, louver frame width and foot height, and the usual swing, trim width and projection, width and height. and the material. Metric. |
|
Product Version: Revit Architecture 2008
5644 Downloads
|
|
|
 |
A floor based pedestal with push button |
No Rating |
Product Version: Revit Architecture 2012
4101 Downloads
|
|
|
 |
This family is parametric so you can set the width, height, panel opening angle and louvered blade angles.
It is restricted to 4 panels, 2left and 2 right, and if you open the panels wider than 90degrees it gets confused, so if anyone can fix this for me I will be grateful.
My first upload to RevitCity! |
|
Product Version: Revit Architecture 2016
7104 Downloads
|
|
|
 |
This is a stylistic modification of something I downloaded a few months ago. We're starting to give our clients "virtual tours" of what their spaces can look like, and there is a lot of demand for kitchen cabinets to look similar to those that they have chosen from magazines. So these are the farmhouse style. |
|
Product Version: Unknown
19834 Downloads
|
|
|
 |
This is a end cabinet for placing on the end of a row of cabinets sitting on a 45 degree angle reference line providing a straight edge on an angle. Feel free to comment and leave feedback! |
|
Product Version: Revit Architecture 2008
2943 Downloads
|
|
|
 |
Parametric horizontally opening freight elevator with window. You can also change the position and size of the window. |
|
Product Version: Unknown
8706 Downloads
|
|
|
 |
Lockset & Latch, Gloss Brass Handle Place component in floor plan with an offet of 3'3" |
|
Product Version: Revit Architecture 2013
4223 Downloads
|
|
|
 |
Gloss Brass Handle, Lockset & Latch. Place component in floor plan with an offet of 3'3" |
No Rating |
Product Version: Revit Architecture 2013
2434 Downloads
|
|
|
 |
Simple carriage style hardware for garage doors. It is loaded as a project because they are two separate families. Edit family and load into your project individually.
Face based. Parametric materials. |
|
Product Version: Revit Architecture 2014
1383 Downloads
|
|
|
 |
Parametric Tudor Arch done in Revit 2022 |
|
Product Version: Unknown
1849 Downloads
|
|
|
 |
Parametric Roman Arch done in Revit 2022 |
|
Product Version: Unknown
1997 Downloads
|
|
|
 |
Parametric Gothic Arch done in Revit 2022 |
|
Product Version: Unknown
1684 Downloads
|
|
|
 |
Parametric Cathedral Arch done in Revit 2022 |
No Rating |
Product Version: Unknown
1107 Downloads
|
|
|
 |
Parametric Oval Arch done in Revit 2022 |
No Rating |
Product Version: Unknown
699 Downloads
|
|
|
 |
Parametric Segmented Arch done in Revit 2022 |
|
Product Version: Unknown
1373 Downloads
|
|
|
 |
glass - double acting |
No Rating |
Product Version: Unknown
6363 Downloads
|
|
|
 |
glass - double acting |
No Rating |
Product Version: Unknown
14530 Downloads
|
|
|
 |
Shows the following: - Mark (auto)
- Width (auto in inches)
- Occupancy count (manual)
- Required Width (auto in inches)
You must link in Shared Parameters into project and create parameters for used wall types (similar to example.) |
|
Product Version: Revit Architecture 2009
2223 Downloads
|
|
|
 |
درب پارکینگ
مبین فراهانی
telegram channel : @revitmasters
instagram : @mobinfarahaniii |
|
Product Version: Revit Architecture 2020
614 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
150 Downloads
|
|
|
 |
Simple adjustable Bilco basement bulkhead |
No Rating |
Product Version: Revit Architecture 2020
2308 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
83 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
72 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
84 Downloads
|
|
|
Search