It has 2 inlets for hot and cold water, and 1 outlet for mixed water.

It is en Revit 2023

No Rating

Product Version: Revit Architecture 2020

153 Downloads

Water Table with a picnic like design. Designed for Preschool and under, indoor or outdoor.

Can be used for water or sand

No cover included

Credit to whoever made this originally

Product Version: Unknown

11549 Downloads

Water fountain with water coming out

Product Version: Revit Architecture 2009

11437 Downloads

This is a Generic Wall based supply Water Valve I made for toilets and sink water supply.

Product Version: Revit Architecture 2012

6032 Downloads

based on the STEP 2 childrens toy. on off toggle for sand or water, complete with Sand toys and boats on water

Product Version: Revit Architecture 2015

2071 Downloads

MIFAB® Series MC-27 water closet carrier with lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8”ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down supports.

No Rating

Product Version: Unknown

44 Downloads

Filtrine Model ES-2-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1480 Downloads

This is my first try at it... but it got the job done which is to have a family to connecto to from a single cold water line under sink to hot water service line 1/2" diameter.

Product Version: Revit Structure 2011

16545 Downloads

Filtrine Model ES-4-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-200' via recirculating drinking water loop. (4) Gal. storage tank. Serves a population of (200), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

755 Downloads

Filtrine Model ES-6-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (6) Gal. storage tank. Serves a population of (300), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1200 Downloads

Filtrine Model ES-8-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (8) Gal. storage tank. Serves a population of (400), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

693 Downloads

Filtrine Model ES-2-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

764 Downloads

Filtrine Model ES-4-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-200' via recirculating drinking water loop. (4) Gal. storage tank. Serves a population of (200), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

575 Downloads

Filtrine Model ES-6-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (6) Gal. storage tank. Serves a population of (300), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

926 Downloads

Filtrine Model ES-8-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (8) Gal. storage tank. Serves a population of (400), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

700 Downloads

Hello, being frusterated trying to find a simple water jug, I just made one up super quick and am uploading for anyone who is looking for the same. 

Parametric with basic materials/ water. 

Very basic, you can alter to suit your tastes. 

No Rating

Product Version: Revit Architecture 2018

1114 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a bronze (1/2 to 2 in) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

421 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. It incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Its compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

555 Downloads

MIFAB Series MI-HEL ____ helicopter port fuel interceptor constructed from high-strength 1/4” (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2” (51) fuel drain connection, 1” (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2” (51) interceptor drain plugs, channel support rails and body corner lifting lugs. Interceptor shall be coated with a two-part epoxy interior and exterior coating.

No Rating

Product Version: Unknown

144 Downloads

man pouring water into a pot overflowing with water. just change water material to swimming pool to get realisim

No Rating

Product Version: Revit Architecture 2009

4989 Downloads

Series 007DCDA Double Check Detector Assemblies prevent the backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. The compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Unknown

699 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. They have a bronze (1/2 to 2 in.) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

251 Downloads

Series 9D Dual Check Valves with Intermediate Atmospheric Vent prevent the reverse flow of hot or cold polluted water from entering into the potable water supply. They have a brass body with stainless steel internal parts, integral strainer, and two durable, tight-sealing, rubber check valves. Series 9D is designed for continuous pressure, non-health hazard applications in smaller supply lines, such as laboratory equipment, processing tanks, sterilizers, dairy equipment, and specifically for boiler feed lines. Minimum Working Pressure: 25psi (172kPa), Maximum Working Pressure: 175psi (12.1 bar)

No Rating

Product Version: Revit MEP 2014

234 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Their compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

307 Downloads

Series 719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a bronze alloy body construction and chloramine resistant elastomers. Series 719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

316 Downloads

Series LF7R Lead-free* Dual Check Valves prevent the reverse flow of liquids in a plumbing system from entering the drinking water supply where there is a non-health hazard. Designed for residential water system containment at the service entrance or individual outlets. They can be installed immediately downstream of the residential meter in a horizontal or vertical position. Replaceable compact plastic check modules. Available in a combination of inlet/outlet sizes and types, and thread and end connections.

No Rating

Product Version: Revit MEP 2014

105 Downloads

The LF8 Series Hose Connection Vacuum Breakers permit the attachment of portable hoses to hose thread faucets and prevent the reverse flow of polluted water into the potable water supply due to backsiphonage. They have a copper silicon alloy body construction, stainless steel working parts, and a rubber diaphragm and disc. The LF8 Series is ideal for inside or outside health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses. Check with local inspection authorities for installation requirements. Maximum Pressure:125psi (8.6 bar).

No Rating

Product Version: Revit MEP 2014

239 Downloads

Series LF289 Spill Resistant Atmospheric Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. They have a Lead Free* copper silicon alloy (LF289) body, silicone rubber check disc, stainless steel springs, a lightweight plastic disc float that minimizes deposits and scaling, a spring-loaded atmospheric vent with O-ring, and a spill-resistant diaphragm seal. Series LF289 has a compact, space-saving design, and is ideal for health hazard applications such as on chemical dispensers or factory machine equipment. Maximum Pressure:150psi (10.34 bar), Minimum Pressure: 8psi (.55 bar).

No Rating

Product Version: Revit MEP 2014

117 Downloads

Series LF709 Lead Free* Double Check Valve Assemblies prevent the reverse flow of polluted water from entering into the potable water supply. They have a modular check design for easy maintenance and epoxy coated (FDA approved) cast iron body construction. Series LF709 is ideal at referenced cross-connections identified in non-health hazard applications. The LF709 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

359 Downloads

Series LF719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a Lead Free* cast copper silicon alloy body construction and chloramine resistant elastomers. Series LF719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

136 Downloads