Dyson Airblade™ Tap 110-120V Hand Dryer - Short AB09 With Airblade technology in a tap, hands can be dried at the sink in 14 seconds. Water isn't dripped on the floor with Dyson Airblade Tap hand dryer because you don't need to move to a separate drying area. Costs less to run and has a small carbon footprint compared to other hand dryers. Dyson Airblade saves space and features touch-free operation. Ideal for minimalistic restrooms, new or fully-refurbished. 11-5/8"W x 11-2/16"D x 6-1/4"H. Stainless steel finish. 5-year parts and 5-year labor limited manufacturers warranty.

No Rating

Product Version: Revit Architecture 2018

1242 Downloads

CB-624 or CB-2424 Catch Basin for Series Dead Level Pre-Sloped Trench Drain System, 6 in. (152mm) or 24 in. (610mm) (specify) wide x 24 in.(610mm) long x 24 in.(610mm) deep, with UV stabilized talc-filled polypropylene body with 4 in. (102mm) and 6 in. (152mm) no hub outlet connections, and polypropylene (6 in. wide only) or ductile iron frame. Catch Basin shall be frame-anchored, with (specify) grating and lockdowns to suit DIN Class (specify) load rating. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

1195 Downloads

Series Dead Level BK Pre-Sloped Trench Drain System with 6(152) wide x 48(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with BK grating. System to include frame connectors, grate lock-downs, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

183 Downloads

Series Dead Level D Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

473 Downloads

Series Dead Level DL-GF 6 in.(152mm) wide x 48 in.(1219mm) long (standard) ductile iron frame and grate assembly, with rust-resistant oil-black coating, and (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers.

No Rating

Product Version: Revit MEP 2014

252 Downloads

Series Dead Level DLP-GF 6in.(152mm) wide x 48in.(1219mm) long (standard) UV stabilized glass-filled polypropylene frame, and (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers.

No Rating

Product Version: Revit MEP 2014

289 Downloads

Series Dead Level DX Pre-Sloped Trench Drain System with 12 in.(305mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with 6 in.(152mm) No Hub Bottom or End outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

274 Downloads

Series Dead Level P Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) UV stabilized glass-filled polypropylene frame, UV stabilized talc-filled polypropylene channels with integral 4 in.(102mm) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

225 Downloads

Series Dead Level S Deck Channel system with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4" IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and recommendations.

No Rating

Product Version: Revit MEP 2014

228 Downloads

Series Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

261 Downloads

Series TD-300 Elevator Channel Drain with 11-3/4 (298) wide x (specify) long 12 ga. type 304 stainless steel body, heel proof and ADA compliant load class B stainless steel grating with grate open area of 65 sq. in. per foot is secured with vandal-proof stainless steel screws, and 4 (110) no hub center outlet. Complies with 2013 California Building Code 403.6.1, 403.6.2, 3007.4, 3008.4, and SFFC Section 511.1.4 for a flow rate of 100 GPM.

No Rating

Product Version: Revit MEP 2014

493 Downloads

Watts BV-300 epoxy coated cast iron ball float backwater valve with removable bronze ring and no hub connections.

No Rating

Product Version: Revit MEP 2014

94 Downloads

In the Imperial Labrary I noticed that the Double Compartment Sink had the Hot and Cold water connections were reverced so I fixed them. This sink is correct.

Product Version: Unknown

4330 Downloads

Line-based detail component with variable symbols/letters spaced evenly along a solid line. I made this family to make up for Revit's lack of symbolic linestyles. Very customizable/parametric.

Good for representing fences, guy wires, overhead power lines, water/gas lines, etc...

Product Version: Revit Architecture 2016

4248 Downloads

Series 27 V-Pattern Cast Copper Silicon Alloy Strainers are designed to protect system components from dirt, rust and other damaging debris in the piping system. This series is ideal for beverage dispensers, ice cube machines, dental equipment, instrument control systems and similar applications.

No Rating

Product Version: Revit MEP 2014

105 Downloads

Water fountain off-set from wall for indented areas

No Rating

Product Version: Unknown

3610 Downloads

Filtrine Model B103 Bottle Filler. Electronic Eye or Push-button activation. Low profile alternative to a traditional drinking fountain or water cooler.

Product Version: Revit Architecture 2012

3593 Downloads

Quick-Connect male connectors - polysulfone. 3501B-0806 - 3/8 in. CTS x 3/8 in. MPT 3501B-1006 - 1/2 in. CTS x 3/8 in. MPT 3501B-0808 - 3/8 in. CTS x 1/2 in. MPT 3501B-1008 - 1/2 in. CTS x 1/2 in. MPT 3501B-1012 - 1/2 in. CTS x 3/4 in. MPT 3501B-1014 - 1/2 in. CTS x 3/4 in. MGHT 3501B-1412 - 3/4 in. CTS x 3/4 in. MPT 3501B-1816 - 1 in. CTS x 1 in. MPT

No Rating

Product Version: Revit MEP 2014

335 Downloads

MIFAB® Series MC-28 lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste, 2” (51) no hub center vent connection and anti-crossover baffles for floor mounted back outlet water closets.

No Rating

Product Version: Unknown

35 Downloads

Quick-Connect female connectors - polysulfone. 3510B-0808 - 3/8 in. CTS x 1/2 in. NPS 3510B-1008 - 1/2 in. CTS x 1/2 in. NPS 3510B-1012 - 1/2 in. CTS x 3/4 in. NPS 3510B-1013 - 1/2 in. CTS x 3/4 in. Closet 3510B-1014 - 1/2 in. CTS x 3/4 in. FGHT 3510B-1412 - 3/4 in. CTS x 3/4 NPS 3510B-1816 - 1 in. CTS x 1 in. NPS

No Rating

Product Version: Revit MEP 2014

268 Downloads

Quick-Connect stackable hose barb unions - polysulfone. 3511B-1008 - 1/2 in. CTS x 1/2 in. Barb

No Rating

Product Version: Revit MEP 2014

211 Downloads

MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use.

No Rating

Product Version: Unknown

340 Downloads

Oval toilet with 2D clean representation, with lineweight representation in elevation. Does clean it self automatically, does not use potable water, no bolt required to install, strong and durable porcelain from my factory! Enjoy. When I have time I will make the handle to flush it!

No Rating

Product Version: Revit Architecture 2016

6580 Downloads

Quick-Connect hose barb fittings - polysulfone. 3513B-1008 - 1/2 in. CTS x 1/2 in. Barb 3513B-1412 - 3/4 in. CTS x 3/4 in. Barb 3513B-1816 - 1 in. CTS x 1 in. Barb

No Rating

Product Version: Revit MEP 2014

247 Downloads

Oval toilet with 2D clean representation, with lineweight representation in elevation. Does clean it self automatically, does not use potable water, no bolt required to install, strong and durable porcelain from my factory! Enjoy. When I have time I will make the handle to flush it!

No Rating

Product Version: Revit Architecture 2016

3223 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 18 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 18 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

189 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 18 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 18 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

566 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 9 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 9 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 9 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/9-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

233 Downloads

24' Above Ground Swimming Pool

5' 5" High

4' High water

Product Version: Unknown

15855 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 8 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 8 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 8 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

168 Downloads