Series FD-910 epoxy coated cast iron parking deck drain with integral countersunk deck flange, 15-1/2 in. (394mm) round top with secured ductile iron heel proof grate, gasket seal between body and top assembly, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

94 Downloads

Series FD-920 epoxy coated cast iron parking deck drain with integral countersunk deck flange, 10-7/16 in. (265mm) round top with secured ductile iron heel proof grate, gasket seal between body and top assembly, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

94 Downloads

Series FD-1160 chemical resistant PVC floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, 6-1/2 in. (165mm) round heel proof adjustable PVC strainer secured with stainless steel screws, and socket outlet

No Rating

Product Version: Revit MEP 2014

137 Downloads

The Sphere of Water

Product Version: Revit Architecture 2015

2751 Downloads

Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

812 Downloads

Heres a nice hot tub for probably both internal and external use. More external than internal but each to there own.

Fixed in size but all materials are changable so enjoy.

I've used my own wood grain for the render so just add a wood grain of your choice and render.

Comes complete with water........

Hope you guys like it and it comes in useful.

Product Version: Revit MEP 2014

21491 Downloads

Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining stem. The B6000, B6001's standard port orifice ensures minimal pressure drop, while Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model B6000 has threaded NPT end connections and Model B6001 has solder end connections. Pressure Rating: For 1/4 to 3 in. - 600psi WOG (non-shock); 150psi WSP; For 4 in. - 400psi WOG (non-shock); 125psi WSP.

No Rating

Product Version: Revit MEP 2010

285 Downloads

Inodoro doméstico de tanque bajo / Residential water closet (with tank)

Más familias / more families: shop.a3d.es

Product Version: Revit Architecture 2012

8926 Downloads

Refigerator - LG LMXS28626

Kind of parametric, but not really. Water dispenser is a nested family. Parameters that don't seem to break are overall width, and freezer heights. Comes with factory dimensions. 

Clearance required in rear: 2"

Clearance required in sides: 1"

No Rating

Product Version: Revit Structure 2020

1904 Downloads

Minimal Hand wash basin.

This hand basin is fixed in size but all materials are changable to your desire. I have even put on Water On / Off parameter within the family incase you wanted to add that little extra touch when creating your render.

Hope it comes in useful.

No Rating

Product Version: Revit MEP 2014

12436 Downloads

8 lane pool olympic sized with 20 foot deep diving well can chance pool bottom type lane type edge type and water type, enjoy

Product Version: Revit Architecture 2009

30187 Downloads

Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

43 Downloads

Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

55 Downloads

Made from concrete and has water in the bowl

No Rating

Product Version: Unknown

4597 Downloads

Series ISCA-550 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

62 Downloads

Series ISCA-560 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting plate and brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

60 Downloads

MIFAB® Series R1200-RS lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and internal dome strainer.

No Rating

Product Version: Unknown

32 Downloads

Series CA-311 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate with integral mounting brackets, and plated hardware.

No Rating

Product Version: Revit MEP 2014

197 Downloads

Series CA-321 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate and bottom bearing plate with integral mounting brackets, and plated hardware.

No Rating

Product Version: Revit MEP 2014

162 Downloads

Series CA-401 floor mounted exposed arm lavatory carrier with heavy gauge steel uprights with integral welded feet, epoxy coated steel arms (specify length), upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

87 Downloads

Series CA-461 wall mounted concealed arm lavatory carrier with adjustable epoxy coated cast iron wall plate, steel back-up plate, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, and plated hardware.

No Rating

Product Version: Revit MEP 2014

71 Downloads

Parametric Water Tank mostly constructed on mumty roof. Internal size, wall thickness, floor & tank roof thickness, materials can be set manually. Tank can be raised above the roof. Manhole covers not provided . Lallan Ji, Varanasi

No Rating

Product Version: Revit Architecture 2015

1797 Downloads

Watts Drainage Products CA-481 wall mounted steel support plate with plated hardware.

No Rating

Product Version: Revit MEP 2014

90 Downloads

Parametric Water Tank on 2 side support mostly constructed on mumty roof. Internal size, wall thickness, floor & tank roof thickness, materials can be set manually. Tank can be raised above the roof. Manhole covers not provided . Lallan Ji, Varanasi

No Rating

Product Version: Revit Architecture 2015

521 Downloads

Series TCA-411 epoxy coated floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

91 Downloads

Series TCA-411-D epoxy coated back-to-back floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, double steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

33 Downloads

Series TCA-411-D-WC epoxy coated back-to-back floor mounted concealed arm track lavatory carrier for 27 x 20 lavatories, with heavy gauge H2267steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

37 Downloads

Series TCA-440 epoxy coated wall mounted concealed arm track lavatory carrier come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware.

No Rating

Product Version: Revit MEP 2014

57 Downloads

Series TCA-450 epoxy coated wall mounted concealed arm track lavatory carrier for 27x20 lavatories come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware.

No Rating

Product Version: Revit MEP 2014

53 Downloads

Series WCA-411/WCA-411-WC floor mounted concealed arm lavatory carrier with heavy gauge steel uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

59 Downloads