This window family has type parameters to drive shim space, frame, mullion, & sash width & depth, glazing unit thickness and materials. Also, wall sheathing location can be set by instance for different wall assemblies, the flange setback will control how far in front of the sheathing the window will project. Lites & transom can be toggled on or off. Also, this family features nested families for picture, casement, awning, gliding, & single hung operation with proper representation in elevation for window, lites, and transoms. This should accommodate a wide variety of window configurations in a single family. 

Product Version: Revit Architecture 2015

9172 Downloads

MIFAB® LIL-OS Series HDPE injection molded oil / sediment interceptor. Unit shall include: sediment bucket (1/4” diameter holes) underneath top inlet ductile iron grate(s), deep seal trap.

No Rating

Product Version: Unknown

84 Downloads

MIFAB® Series LIL-L HDPE injection molded lint interceptor. Unit shall include: two internal straining baffles with 3/8″ diameter holes spaced 1/2″ apart, internal deep seal trap, and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

55 Downloads

MIFAB® LIL-PL Series HDPE injection molded plaster interceptor. Unit shall include: two internal straining baffles (first one has 3/8″ x 1.25″ long slots and the second one has 1/4″ diameter holes spaced 1/2″ apart, and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

21 Downloads

The purpose of this family is to allow spatial design while considering the workflow paths of building user. It was made to otpimize the floor plan to the health procedures in a future care unit. Each line represents a different actor walking on the floor plan. Each segment of the line can be a step in the workflow, with the option to specify stop times. The bubble size is proportional to the time spent in a stop.

If you use it for any purpose, please leave a comment. This is part of an academic research and having feedback is precious. Thank you!

The structure of the family is based on the Path of Travel family, also from ReviCity. Check the tutorial on how to use it:

http://fredvanamstel.com/publications/optimizing-walking-paths

No Rating

Product Version: Revit Architecture 2012

1585 Downloads

MIFAB® LIL-SA Series HDPE injection molded sand interceptor. Unit shall include: two internal sand separation baffles with 3″ diameter holes, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

66 Downloads

MIFAB® Series LIL-FUR HDPE injection molded fur interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

34 Downloads

MIFAB® Series LIL-R HDPE injection molded rice interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

31 Downloads

Gallus 2000-NG4 Gas Meter for utlity reticulation at property boundary

Wall hosted,               Category Speciality Equipment

White painted metal sheet cover with On/Off control

Adjustable length gas supply pipe (instance parameter), adjustable position on wall for unit.

Plan View only shows Gas  meter icon graphic.

Gas label has distance from wall control to suit different view scales / personal prefs.

Materials partly assigned so User needs to check mats before render otherwise shaded views set up.

Product Version: Revit Architecture 2013

6466 Downloads

You can also only use the unit without the fence and the base. I made 'Yes/No' parameters to turn does on and off.

The opject is made out of rough dimentions!

No Rating

Product Version: Revit Architecture 2017

560 Downloads

MIFAB® LIL-S Series HDPE injection molded solids interceptor. Unit shall include: internal perforated sediment bucket (1/4″ diameter holes) with coarse screen, baffle assembly (3/8″ x 1 1/4″ slots) and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

44 Downloads

MIFAB® LIL-MAX Series HDPE injection molded hydromechanical grease interceptor. Unit shall include: removable baffle assembly, deep seal trap covered by lid, sewer gas stopper, securing latches, external vented flow control fitting, internal air relief by pass, HDPE injection molded, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Lil Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O.

No Rating

Product Version: Unknown

485 Downloads

MIFAB® LIL-F Series HDPE injection molded fish scale interceptor. Unit shall include: two internal straining baffles (first one with 1/4″ diameter holes and second one with 1/8″ diameter holes – both spaced 1/2″ apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

88 Downloads

For more contemporary/modern designs Kolbe has introduced the Ultra Series beveled direct set. These aluminum clad wood windows are glazed to the interior and direct set in the heavy duty extruded aluminum frame.  The profile is integral to the frame exterior, providing a streamlined appearance in addition to the strength of extruded aluminum.  Daylight is maximized due to the glass unit being set directly into the frame without a sash; this also gives a larger view. The detailed sticking allows for Kolbe's performance divided lite (PDL) options, grilles-in-the-airspace, or interior wood removable grilles to be used.  As with Kolbe’s other Ultra Series products the same flexible design options are available. www.kolbe-kolbe.com

No Rating

Product Version: Revit Architecture 2012

1316 Downloads

Hi Guys

I was looking for something extreme and loosely based this on the Emperor 200 gaming station.

As spatial planning is part of my job I needed to get an idea of how big this unit would be.

This is a very rough model but works for what I need.

Product Version: Revit Architecture 2014

7787 Downloads

MIFAB® BIG-O Series HDPE rotational molded oil interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), internal air relief by-pass, adjustable oil draw-off assembly (1 1/2″) on each side, double vent connections (3″) on each side, sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20

No Rating

Product Version: Revit Architecture 2020

243 Downloads

MIFAB® LIL-O Series HDPE injection molded oil. Unit shall include: sediment bucket (1/4″ diameter holes) with perforated baffle (3/8″ x 1 1/4″ slots) near inlet, deep seal trap covered by lid, sewer gas stopper, securing latches, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and HDPE injection molded, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

72 Downloads

MIFAB® MI-LINT Series sanitary powder epoxy coated inside and outside fabricated 10 gauge steel lint interceptor with flow rate of 34-1536 gpm. Unit shall include: 1/2″ (13) thick fixed primary straining baffle with 3/8″ (10) holes and secondary 1/2″ (13) thick removable straining baffle with 3/8″ (10) holes, removable cross bar, securing bolt(s), stainless steel calibrated orifice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

52 Downloads

MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use.

No Rating

Product Version: Unknown

331 Downloads

For more contemporary/modern designs Kolbe has introduced the Ultra Series beveled direct set. These aluminum clad wood windows are glazed to the interior and direct set in the heavy duty extruded aluminum frame.  The profile is integral to the frame exterior, providing a streamlined appearance in addition to the strength of extruded aluminum.  Daylight is maximized due to the glass unit being set directly into the frame without a sash; this also gives a larger view. The detailed sticking allows for Kolbe's performance divided lite (PDL) options, grilles-in-the-airspace, or interior wood removable grilles to be used.  As with Kolbe’s other Ultra Series products the same flexible design options are available. www.kolbe-kolbe.com

Product Version: Revit Architecture 2011

1317 Downloads

HJacobs excellent  shelf - metric version

This is a parametric wall mounted shelving unit for use with adjustable shelving on brackets. Its subcategory comes with a default dashed linetype so it shows up dashed in plan and elevation.

http://www.vtourinteractive.com/blog 

Product Version: Revit Architecture 2010

3927 Downloads

MIFAB® Series MI-SD____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s).

Product Version: Unknown

218 Downloads

A sliding archive system shelves, for hunging big formats (like A0 sheets), brought from real life to digital world, by looking a manufactured unit by the paraguayan company Felipe Aghemo.

The parts have standart 3105xmm lenght, 900mm or 1350mm width, and 2170mm height; but the composition and materials are fully parametric.

Manufactered by Felipe Aghemo. Country: Paraguay.

Modeled by dufb. Country: Brazil.

============

Um sistema de prateleias/arquivos deslizantes, para pendurar grandes formatos (do tipo A0), trazido da vida real para o mundo digital, a partir de produto fabricado pela empresa paraguaia Felipe Aghemo.

Os módulos tem tamanho padrão de 3105xmm (altura), 900mm ou 1350mm (largura), e 2170mm (altura); mas a composição de quantidades de módulos e materiais de acabamento são inteiramente parametrizados.

Fabricado por Felipe Aghemo. País: Paraguai.

Modelado por dufb. País: Brazil.

No Rating

Product Version: Revit Structure 2017

1182 Downloads

A sliding archive system of shelves for small formats (like A3, A4) and/or books, brought from real life to digital world, measured from a manufactured unit by the paraguayan company Felipe Aghemo.

The parts have standart 3180xmm lenght, 403 or 767mm width, and 2240mm height. The composition and materials are fully parametric.

Manufactered by Felipe Aghemo. Country: Paraguay.

Modeled by dufb. Country: Brazil.

============

Um sistema de arquivos deslizantes, com prateleiras para pequeno formatos (A3, A4) e/ou livros, trazido da vida real para o mundo digital, a partir de produto fabricado pela empresa paraguaia Felipe Aghemo.

Os módulos têm tamanho padrão de 3180xmm (comprimento), 403 ou 767mm (largura), e 2240mm (altura). A composição de quantidades de módulos e materiais de acabamento são inteiramente parametrizados.

Fabricado por Felipe Aghemo. País: Paraguai.

Modelado por dufb. País: Brazil.

Product Version: Revit Architecture 2017

1549 Downloads

MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of _____(indicate). Unit shall include: ½”(13) thick fixed primary straining baffle with 1/4” (6.4) holes and secondary ½”(13) thick removable straining baffle with 1/4” (6.4) holes, removable cross bar , securing bolt(s), stainless steel calibrated orfice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

45 Downloads

MIFAB® Series XL-MI-G ____ sanitary, acid resistant, epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable (fixed for XL-MI-G-10/-11) baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orfice plate, internal air relief by-pass, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

343 Downloads

MIFAB® Series MI-FISH sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale interceptor. Unit shall include: Sediment bucket with perforated baffle near inlet (3/8” (9) holes), primary removable straining baffle (1/2” (13) thick with 1/4” (6) holes), secondary removable straining baffle (1/2” (13) thick with 1/8” (3) holes), securing bolt(s), removable cross bar, stainless steel calibrated orfice plate and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

111 Downloads

MIFAB Series MI-SAND____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor.

Unit shall include: removable cross bar, four 3” (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

106 Downloads

Laundry stacked washer/dryer units based on the Whirlpool Compact models.  Materials are controlled by parameter settings.  Size is based on unit and not parameter controlled. 

25-3/4" D, 24" W

Recommended side and rear clearances from manufacturer are included with reference planes for alignment.

Product Version: Revit Architecture 2020

31465 Downloads

MIFAB® Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include:

sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated non skid rectangular lid.

No Rating

Product Version: Unknown

72 Downloads