One unit metric louvre bay - blades are set every 15cm - blabes inclinaison is parametric - simple model not very detailled
Jalousies ou louvres parametriques sur chassis simple - lames de 15 cm - modele simplifie suffisant jusqu'au plan d'execution

Product Version: Unknown

7369 Downloads

This is a more or less parametric PEMB frame. Most dimensions are changeable. I was having inconsistent unit errors so to change the slope you have to change the decimal in the slope equation and the width at the top is governed by the factor in it's equation that is based on the base width. Play with it and have fun.

Product Version: Revit Building 9.1

3589 Downloads

MIFAB® Series MI-O-HU ____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage.

No Rating

Product Version: Unknown

282 Downloads

The Side Chair by Alexander Kneller is a singular Finnish plywood unit that fuses together a chair, table, and storage space.

Product Version: Revit Architecture 2011

7056 Downloads

Storage for Bulk Clay. Keeps clay moist and workable with the added feature of 4" casters for mobility. This unit also features a hinged lid for easy access.

NOTE: Lid inoperable in model 

No Rating

Product Version: Revit Architecture 2008

4836 Downloads

Oak Display Cabinet with glazed front. Base unit hinged doors, top units sliding doors. Ideal for living room, and with TV modelled betwween top units. Adjustable Parmameters

Product Version: Unknown

25777 Downloads

Do not use...Use Wire Shelving Unit (Revised)

No Rating

Product Version: Revit Architecture 2020

400 Downloads

A BOOK SHELF CUM PARTITION UNIT WITH MULTI COLOR SCHEME   

Product Version: Revit Architecture 2010

11526 Downloads

Temspec Unit Ventilator - VUD 200D

Generic Format

No Rating

Product Version: Revit Architecture 2009

387 Downloads

Temspec Unit Ventilator - VUD 1600D

Generic Format

No Rating

Product Version: Revit Architecture 2009

367 Downloads

Temspec Unit Ventilator - VUD 1200D

Generic Format

No Rating

Product Version: Revit Architecture 2009

518 Downloads

Full series of sizes in one family. Variable materials and sizes, ability to change muntin patterns, trim materials and sizes, turn trim and head on and off (allowing multiple units). Also includes unit size parameter and u-value parameters and a small triangle that shows up in plan only for those sizes that meet egress requirements.

Product Version: Unknown

4317 Downloads

This spice rack is a casework family and is replete with a rack that slides out via an instance parameter, designated materials assigned through casework subcategories, and bottles of spices!  It is a custom unit as are most under counter spice racks.  The usual overall dimensional parameters are present and working.

Product Version: Revit Architecture 2012

15650 Downloads

Panels are designe for a study, library or executive office. Unit comes in white, walnut, and mahogany.  Panel shows framed panels, base molding, and crown molding.  Sorry I have not figured how to cut them to fit specific walls.  However, I created the panels in Autodesk Inventor where you can customized panel above and below windows etc.

Product Version: Unknown

3928 Downloads

Panels are designe for a study, library or executive office. Unit comes in white, walnut, and mahogany.  Panel shows framed panels, base molding, and crown molding.  Sorry I have not figured how to cut them to fit specific walls.  However, I created the panels in Autodesk Inventor where you can customized panel above and below windows etc.

Product Version: Revit Architecture 2015

3055 Downloads

Panels are designe for a study, library or executive office. Unit comes in white, walnut, and mahogany.  Panel shows framed panels, base molding, and crown molding.  Sorry I have not figured how to cut them to fit specific walls.  However, I created the panels in Autodesk Inventor where you can customized panel above and below windows etc.

No Rating

Product Version: Revit Architecture 2015

4904 Downloads

You can also only use the unit without the fence and the base. I made 'Yes/No' parameters to turn does on and off.

The opject is made out of rough dimentions!

Product Version: Revit Architecture 2017

646 Downloads

Laundry dryer unit based onthe Whirlpool WED560.  Materials are controlled by parameter settings.  Size is based on unit and not parameter controlled.

7.4 cu ft load size

27-9/16" D, 27" W, 38-5/8" H

Recommended side and rear clearances from manufacturer are included with reference planes for alignment.

No Rating

Product Version: Revit Architecture 2020

6145 Downloads

Laundry washer unit based on the Whirlpool WFW560.  Materials are controlled by parameter settings.  Size is based on unit and not parameter controlled.

4.3 cu ft load size

27-9/16" D, 27" W, 38-5/8" H

Recommended side and rear clearances from manufacturer are included with reference planes for alignment.

No Rating

Product Version: Revit Architecture 2020

5004 Downloads

EDIT:  new 2014 version here--http://www.revitcity.com/downloads.php?action=view&object_id=15176

It's much improved.

Old info:

Adaptation of the basic shelving unit, with some randomized extrusions plopped down on the shelves.  Scalable to a degree, 4-6' aprox height.  Looks reasonable in array.

Books only visible at "fine" detail level.  Shelving is bare at medium/coarse.

Product Version: Revit Architecture 2010

64573 Downloads

This Bard unit allows the user to set the manufacturer's width and have the height, depth and other parameters adjust automatically.  It is important to set the correct widt 33.2" or 38.2" or 42.075".  The rest will self-adjust.  

Covers units W17A2 through W70A2 and W17L2 through W70L2.

Materials and colors are adjustable.

No Rating

Product Version: Revit Architecture 2015

666 Downloads

A 1 basin sink made by Bradley Corporation.  Has sink, soap dispenser, hand dryer and trash can (trash on right side) all in one unit.  Fully parametric and ADA complient.  Made by Bradley and made better by me.  Please rate and comment.

Product Version: Revit MEP 2010

3221 Downloads

Price Industries Stainless Steel Louvered Grille

The 700 Series Louvered Grille makes uses adjustable (supply) or fixed (return) blades to control airflow and provide a supply or return unit with minimal see-through.

No Rating

Product Version: Revit MEP 2020

638 Downloads

This casework family represents an American Woodmark base unit with two large drawers and one smaller one.  All pre-defined materials are assigned via casework sub-categories.  The URL opens the Drawer Base Cabinet catalog wherein you can find the 8 models included in the family.  Each drawer can be individually opened using one of the three instance parameters created for that purpose.

Product Version: Revit Architecture 2012

11382 Downloads

I wasn't satisfied with the BIM families from True's website so I created this fully parametric family has all of the T-Series refrigerators including solid door, glass door, and half door styles. All of these models can become freezer or dual temperature units by changing the model numbers in Identity Data.

The only model not included is the "T-23P" Pass-Thru unit because I didn't want to have to make a visibility instance for a void. Maybe I'll update it later. I also plan to add the sliding door units in the near future.

Let me know if there are any issues.

Product Version: Revit Architecture 2013

19054 Downloads

This is a full catalog of Andersen Tilt Wash single wide double hung windows. Unit ID is Andersen nomenclature, i.e. 3046. Rough openings are per catalog and should be accurate per mfg specs.

2 files to download: Family and Catalog

Note: units with 56 are equal height sash. Andersen standard units for this height are cottage units and available as same height sash.

Product Version: Revit Architecture 2009

9322 Downloads

No Rating

Product Version: Revit Architecture 2012

9686 Downloads

This American Woodmark casework family cabinet is a single door cabinet with no drawer or shelf.  It is intended for vertical tray storage.  The door opens with an instance parameter and is reversible.  The pre-defined materials are assigned via casework sub-categories.  The URL parameter opens the catalog wherein this cabinet is found.  Although the width is adjustable, American Woodmark offers only the 9" unit included as the sole family type.

Product Version: Revit Architecture 2012

7156 Downloads

MIFAB® Series BIG- ___ -S HDPE rotational molded solids interceptor with solids holding capacity of ____ (indicate). Unit shall include: 3/8” uniform wall thickness, solids retention baffle with elevated 3” diameter passageway, adjustable lid system, sample port access and 4” no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20.

No Rating

Product Version: Unknown

102 Downloads

This American Woodmark casework family is a narrow vertical tray storage unit.  It includes the tray divider and an adjustable shelf.  The door opens with an instance parameter.  The pre-defined materials are assigned with casework sub-categories.  American Woodmark offers this cabinet in a single width, 9", but does also offer a reduced 14" depth.  Both models are included as family types.  The URL opens the catalog wherein you can find this cabinet.

No Rating

Product Version: Revit Architecture 2012

5047 Downloads