Two sink basins, soap dispenser, hand dryer, and one trash unit in the middle.  Please rate and comment.

Product Version: Revit MEP 2010

4754 Downloads

Two sink basins, soap dispensers, hand dryers, and one trash unit on the left side.  Please rate and comment.

Product Version: Revit MEP 2010

2504 Downloads

This casework family is over the top!  There are the usual casework dimensions, but in addition, there are instance parameters to open the doors, pull out the top drawer, and slide out the two shelves hidden behind the doors, all individually controlled.  There are dedicated materials assigned by casework subcategories.  The model is replete with pots and pans sitting on the sliding shelves.  There are ten predefined widths.  At the narrower sizes, you'll see the pots and pans sticking out through the cabinet sides, so if you want, for instance, a 21" unit, you'll have to edit the family to remove or reposition them.  The unit is modelled on the American Woodmark line of cabinets.  The properties URL will take you to the American Woodmark web site.  This is a complex model.  I have tested it thoroughly, but if there are any difficulties, please leave a note for me.

I have updated this model.  It has more subtle engraving on the doors, curved handles, and the doors open more reliably.  Open them in angular increments of something less than 90°.  For example, if you want them opened to 90°, do it in two operations with the first angle 70° and the next 20°.  Close them the same way.

Product Version: Revit Architecture 2013

7510 Downloads

Wall-mounted hair dryer holder modeled after Moen Voss unit

No Rating

Product Version: Revit Architecture 2014

2256 Downloads

With or without doors or back panel. Matrix of shelves dependant on unit height. Dimensiones parametrizadas

Armario o estantería, puertas y fondo apagables, matriz de estantes dependiente de altura del mueble.

Product Version: Revit Architecture 2013

16541 Downloads

Unofficial model. Drawn by measuring an existing unit.

Width: 2080mm

Paper roll width: 11 to 44 inch

(Tags: Plotter, printer, office, plot, print, copier, copy, copiing machine, copymachine)

Product Version: Revit Architecture 2016

31378 Downloads

Modeled after the Fetco commercial coffee grinder G2.2.  I used a Wilsonart laminate material for the coffee beans in the two windows on the front of the unit.

No Rating

Product Version: Revit Architecture 2020

4962 Downloads

Shower stall to fit in a corner. Curved Glass Front. Overhead shower head with body spray heads and built in storage unit.

Product Version: Revit Architecture 2010

184440 Downloads

just a simple block of an acid neutralizer packaged unit. mostly used for labs, 2 treatment tanks and two resevoir tanks with panel access.

Product Version: Unknown

3406 Downloads

Dorm Size Refrig/Freezer with Microwave Sitting on Top.  Suitable for motels, daycares, or dormitory rooms.

Product Version: Unknown

3588 Downloads

Round Bed with built-in nightstands and corner unit;

http://www.avetexfurniture.com/furniture/bedroom/modern-bedroom-furniture/milan12/

Product Version: Revit Architecture 2010

31690 Downloads

This is a parametric wall mounted shelving unit for use with adjustable shelving on brackets. Its subcategory comes with a default dashed linetype so it shows up dashed in plan and elevation.

Product Version: Unknown

11467 Downloads

here is a modern firepit, modeled after the Barkman Bridgewood firepit. the unit is cast concrete made to look like wood.

Product Version: Unknown

2365 Downloads

I designed this for an alzheimer unit. It is made so the paients can walk around and exercise.  I coulndnt find one on the site so i made one that would work with my situation. It is attached to the floor and its dimensions are editable. I hope you like it.

Product Version: Revit Structure 2010

5301 Downloads

Two sink basins, with soap dispensers, hand dryers, and one trash unit on the right side.  ADA complient.  Please rate and comment.

Product Version: Revit MEP 2010

2809 Downloads

One basin sink with soap dispenser, and hand dryer, all in one unit.  Same as the 353631 & 353632 except is doesn't have the trash can.  Please rate and comment.

Product Version: Revit MEP 2010

3321 Downloads

This is a wall mounted Zip Hydroboil unit - its not parametric but it is modelled to the correct size

Product Version: Unknown

1851 Downloads

This is a 3 Bay Roof Top Condensor Unit for industrial & commercial applications.  This is a generic model, non hosted. Overall dims are: 1200w x 3400l x 815h.  Built in 2010 Revit Architecture.

No Rating

Product Version: Unknown

6424 Downloads

Heres a nice design coffee table for a modern look.

Size is fixed as per unit sold, 980mm Width, 480mm Height and 480mm Depth.

Inner core and main table materials are changeable so enjoy choosing your colour / material.

No Rating

Product Version: Revit MEP 2014

7786 Downloads

NOTE:

Browse thru all the various Tags to get the one you want.

Door Tag with Project Unit Dimensions (instead of Symbols) suitable for Residential Contractor Plans. The "45" tags are for Doors in Angled walls. For larger doors (Garage) you can use the "FEET" type tag.

No Rating

Product Version: Unknown

5012 Downloads

Modern Entertainment Center for Multi-Media Equipment

Solid to Void Geometry with Vert Alum Rods and Glass Shelves - Main Unit is made of Blue Plastic Laminate

Visit my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

2891 Downloads

This is a Generic Model of a roof top swamp cooler with a angle support. All are adjustable.. Unit size, height, ect... It also has a duct extension.

Product Version: Revit Architecture 2012

2397 Downloads

This is a 12 Bay Roof Top Condensor Unit for industrial & commercial applications.  This is a generic model, non hosted. Overall dims are: 4500w x 3400l x 815h.  Built in 2010 Revit Architecture.

No Rating

Product Version: Unknown

3597 Downloads

This is a 10 Bay Roof Top Condensor Unit for industrial & commercial applications.  This is a generic model, non hosted. Overall dims are: 1750w x 4070l x 755h.  Built in 2010 Revit Architecture.

No Rating

Product Version: Unknown

5287 Downloads

ROOM TAG WITH SPACE FOR CALLING OUT THE SHEET WHERE THE ENLARGED PLAN OF THAT ROOM / UNIT IS LOCATED.

Product Version: Unknown

5810 Downloads

Heavy Duty Range Consists of Griddle, Fryer Hot Top, 6 Open top Burners and food warmer.

Each unit have an convection oven (Expet Fryer)

Product Version: Unknown

10370 Downloads

Minimalist Modern Indoor / Outdoor Bench (Corner Unit)

Modular Sectional Bench

HighTower Group

No Rating

Product Version: Unknown

9463 Downloads

Minimalist Modern Indoor / Outdoor Bench (Seating Unit)

Modular Sectional Bench

HighTower Group

Product Version: Unknown

17282 Downloads

Wall based cabinet with a roll-down door. Fully parametric. Elevation is based at bottom of the unit so as to sit on the counter.

Revit 2019

No Rating

Product Version: Unknown

1342 Downloads

Everything is parametric including:

• Louver angle, thickness, and spacing


• Awning cable can be adjusted (height & length) as required including the mounting plate


• As many sections of louvers as you want as long as you start with at least 2 mounts.


• Length, Width, and Height of the unit itself.

This is saved in Revit 2018 format

Product Version: Revit Architecture 2017

6418 Downloads